COOPER LIGHTING SOLUTION C6RV042 6 Inch Remodel International Vertical Open Downlight Instruction Manual
- June 3, 2024
- COOPER LIGHTING SOLUTION
Table of Contents
COOPER LIGHTING SOLUTION C6RV042 6 Inch Remodel International Vertical
Open Downlight
DESCRIPTION
Low brightness 6-inch aperture reflector for use with 26W or 32W Triple Twin Tube 4-pin lamps for below ceiling installation. The precisely formed non- imaging reflector ensures 55° cutoff to lamp and lamp image and the one piece design eliminates light leaks at the ceiling. Standard features include low iridescent finish on all reflector colors to eliminate “rainbowing”. One electronic ballast operates 26W and 32W triple lamps. Venting ensures maximum lamp life and lumen output. Adjustable socket locks lamp into optimal position and cannot be disturbed by normal maintenance. Medium beam, wide beam, lensed, and open wall wash reflectors are interchangeable within the same housing.
SPECIFICATION FEATURES
Reflector
.050 thick aluminum, in a one piece spun macrofocal parabolic contour.
Available in a variety of Alzak® finishes. Positive reflector mounting pulls
trim tight to ceiling.
Trim Ring Options
Self flanged or molded white trim ring. Rimless trim ring accessories
available.
Socket Connector
One piece vented and finned die cast aluminum cap for maximum thermal
performance.
Housing Construction
Galvanized steel plaster ring accommodates up to 1″ ceiling thickness.
Conduit Fittings
Die cast screw tight connectors.
Socket
4 pin GX24q-3 base with fatigue free stainless steel lamp spring ensures
positive lamp retention.
Electronic Ballast
Electronic ballast provides full light output and rated lamp life. Provides
flicker free and noise free operation and starting. End of lamp life
protection is standard.
Labels
cULus listed, standard damp label.
ENERGY DATA
26W TTT 4-pin
Ballast: Electronic
120V Input Watts: 29| Line Amps: 0.25
277V Input Watts: 26| Line Amps: 0.09
Power Factor: >0.99| THD: <90%
Min. Starting Temperature: -10°C (15°F)
Sound Rating: Class A Standards
32W TTT 4-pin
Ballast: Electronic
120V Input Watts: 36| Line Amps: 0.32
277V Input Watts: 36| Line Amps: 0.16
Power Factor: >0.99| THD: <10%
Min. Starting Temperature: -10°C (10°F)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional options, please consult your Cooper Lighting Solutions Representative. Alzak is a registered trademark of Aluminum Company of America.
ORDERING INFORMATION
EXAMPLE : C6RV042ECP 6051LI WF=6″ CFL Vertical Wide Beam Remodel
Downlight, (1) 26/32 Watt TTT lamp with 120/277 Volt, Chicago Plenum, Self
Flanged with Specular Clear Finish
Notes: Order trim with polymer trim ring(Consult specification sheet for ordering information and options).
PHOTOMETRICS
- Beam diameter is to 50% of maximum footcandles, rounded to the nearest half-foot.
- Footcandle values are initial, apply appropriate light loss factors where necessary.
- 26W PLT = 82
EM Multiplier:
- (in emergency mode): EM = .28
Beam diameter is to 50% of maximum footcandles, rounded to the nearest half- foot.Footcandle values are initial, apply appropriatelight loss factors where necessary.
- 26W PLT = .94
- EM Multiplier: (in emergency mode):EM = .28
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269
770.486.4800 FAX 770 468.4801