T-Mobile TMO-G4AR 5G Gateway User Guide
- June 12, 2024
- T-Mobile
Table of Contents
T-Mobile TMO-G4AR 5G Gateway User Guide
Safety Guidelines
Potential Equipment Damage
Follow these recommendations to protect yourself and the 5G Gateway from harm:
- Use the 56 Gateway only in upright position as shown in the Quick Start Guide.
- Donotinsert any sharp object into the openings of the 5G Gateway.
- Donot put the 5G Gateway near a heat source.
- Avoid placing the 5G Gateway in areas where the gateway will be in intense or prolonged direct sunlight.
- TheSG Gateway is intended for indoor use only. Do not use the 5G Gateway outside, and make sureall the connections are indoors.
- Do not puttee 5G Gateway in damp or wet locations; for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Do not spill any liquid on the 5G Gateway.
- Donot touch the 5G Gateway or its power adapter or cord with wet hands.
- Donot place the 5G Gateway on an unstable surface or support.
- Donot place anything on top of the 5G Gateway.
- Donotuse liquid or aerosol cleaners; unplug the 5G Gateway and use a soft, dry cloth for cleaning.
- When connectinga PC or other electronic device to the 5G Gateway, make sure you use the provided cables and connect the device to the right port of the gateway.
- Incorrect connections may damage the device and/or the 5G Gateway.
- Donotopenortry to open the 5G Gateway.
- Opening or removing covers can expose you to dangerous high voltage points or other risks.
- Do not attempt to access, manipulate, insert foreign objects into, remanufacture, or immerse o otherwise expose it to water.
- Use care to avoid accidental drops or sprays of water on the 5G Gateway.
- If the T-Mobile 5G Gateway is dropped—especially on a hard surface—or in the case of suspected damage, contact your nearest T-Mobile service center for inspection.
Risk of Electric Shock or Fire
Follow these guidelines when using the T-Mobile 5G Gateway:
- Connect the power adapter or cord to the right supply voltage (120V AC in USA).
- Payattention to the power load of the electrical outlet and possible extension cord.
- Anoverburdened power outlet or damaged cords and plugs may cause electric shock or fire.
- Check the power adapter regularly. If you find any damage, replace the power adapter immediately.
- Donot connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades exposed.
- Leave adequate space for heat dissipation to avoid any damage caused by overheating the 56 Gateway.
- Do not cover the 5G Gateway orbits ventilation holes. Blocking the ventilation holes may cause fire.
- Use the power adapter provided with your 5G Gateway and do not fasten the power cable to building surfaces.
- Ensure the cable can move freely. Do not place heavy objects on the cable.
- Do not use the 5G Gateway outside, and make sure all the connections are indoors.
- Do not install use, or service the 5G Gateway during a thunderstorm.
- There is a
- remote risk of electric stockroom lightning.
- The standby power consumption of the 5G Gateway is 4.5W.
Introduction
This document explains how to operate the T-Mobile 5G Gateway at home using visual cues to achieve the best placement and performance.
NOTE:
This document s a supplement to the Quick Start Guide and T-Mobile Internet
mobile app. Use the Quick Start Guide to get up and running quickly.
The contents of this guide are subject to change without notice.
Getting to Know Your T-Mobile 5G Gateway
You will find the following items in the box:
- Gateway
- Windowsill Bracket
- Power Adapter
- Quick Start Guide
- T-Mobile Terms and Conditions
- SafetyandRegulatory Notice
The gateway offers 4G/LTE or 5G/NR WAN (Wide Area Network) mobile network connectivity by way of four wide band omni or semi directional antennas that supports all LTE/SG bands. It functions as the connection point between the WAN outside your home and the LAN (Local Area Network) inside your home.
Physical Interfaces
The gateway’s physical interfaces include those shown in the following
diagrams.
-
Be sure the Ethernet and power cables are securely plugged into the connectors of the 5G Gateway before attaching the windowsill bracket.
-
Twist to loosen or tighten the windowsill bracket screw for adjusting the 5G Gateway’s orientation.
Setting up the T-Mobile 5G Gateway
Recommended Setup: Use the T-Mobile Internet mobile app
Using o the Quick Start Guide and the T-Mobile Internet mobile app provides the [z 0m easiest and best setup experience. The T-Mobile Internet mobile app can be 1] downloaded from either Google Play Store or the Apple App Store.
NOTE
The first time you setup your gateway, “How to navigate this interface”
displays on the LCD panel. Select “OK” to continue the start up.
Download the T-Mobile Internet app onto your smart phone. Follow the on-screen
prompts in app and complete first time setup. Then the app establishes
communication and connects to the gateway.
Manual Setup: Identify An Ideal Location
Start by identifying the ideal location for your gateway — that location will meet the following criteria:
-
Position the 5G Gateway on elevated surface for getting the best signal strength
-
Near a window where the signal strength is strongest
Note:
Low-e glass windows may weaken signal strength. Avoid placing the 5G Gateway near low-e glass windows. -
In an open space away from:
- Basements
- Devices that may cause interference such as Wi-Fi routers
- Behind TVs or monitors
- Walls or obstructions
- Heavy-duty appliances or electronics such as microwave ovens and baby monitors
- Metal fixtures, enclosures, cabinets, reinforced concrete, or pipes
-
Near r a power outlet
-
On an upper floor of the home or at least 6 feet off the floor
Connecting Power to the T-Mobile 5G Gateway
- Place the gateway on a flat surface, such as a tabletop or similar; close to a window and near an electrical outlet
- Minimize the number of obstructions as much as possible
- Connect the provided USB Type-C power cable to gateway’s power port, then plug the other end of the power cable into a grounded electrical outlet
- The USB Type-C power cable must be capable of supporting 100-240V (volts) AC adapter, 50-60Hz frequency and 3A of current at DC 15V
Starting the T-Mobile 5G Gateway
After the gateway is connected to a power source, the LCD screen displays an animated T-Mobile logo that indicates the gateway is starting up.
Six small dots displayed on the LCD panel indicates available screens of:
- Connection
- Devices
- Internet Line Number
- Messages
- Antenna
- Language
Take a moment to browse these screens to see what information is available. For more information about the LCD screen display, refer to the section “Understanding the LCD” on page 16.
When the start up sequence is complete, the LCD displays the Connection screen.
Connecting Devices
Connecting Wi-Fi Devices
Connect your wireless devices to your network using the Wi-Fi SSID (Wi-Fi
name) and Wi-Fi Key (Wi-Fi password), which are found on the gateway’s rear
panel. Here is an example of the label:
The QR code on the label provides easy set up when the T-Mobile Internet
mobile app s installed.
Connecting Ethernet Devices
The gateway has two (2) Ethernet LAN ports. Use an Ethernet cable to connect devices that don’t have Wi Adapters or capabilities.
Viewing Connected Devices
The Devices LCD screen on the front of the gateway shows the number of devices
currently connected to the network by way of either Wi-Fi or Ethernet.
To view how many devices are connected:
- Observe the LCD Connection screen
- Pressthe right arrow on the LCD panel to display the Devices screen
Accessing Your Web GUI (Graphical User Interface)
NOTE:
You can configure the gateway and any connected client devices via the
T-Mobile Internet mobile app ona smartphone.
Ensure the Local Area Connection setting on your PC, laptop, smart phone, or tablet is configured to obtain an IP address automatically.
On your device, open a web browser, and enter http://19268.121
NOTE:
If you are unable to access the GUI at the above address, please contact
customer support.
Home Screen
You should now see the dashboard screen, which provides network connection
status and information about the gateway.
The Home screen contains four sections:
- Connection status: shows network status of the connected devices, the gateway, and the T-Mobile network connection
- Connection quality: signal strength is represented by number of bars
- Gateway information
- Firmware version: variable
- Ul version: variable
- Serial Number: variable
- Running Time: how long it has been since the gateway’s last reset/power-cycle
- T-Mobile Internet mobile app: scanning the QR code with your smart phone and downloading the mobile app for the easiest setup experience
NOTE:
Gateway settings are available in the T-Mabile Internet mabile app.
Language Selection
From the GUI’s top-right corner of the screen, select your preferred language,
English or Espafiol,
from the dropdown menu for user interface language.
Support Screen
Use the Support tab for useful FAQ and T-Mabile Community Forum links, and
customer support information.
Language Selection
From the GUI’s top-right corner of the screen, select your preferred language, English or Espafiol, from the dropdown menu for user interface language.
Support Screen
Use the Support tab for useful FAQ and T-Mabile Community Forum links, and customer support information.
Replacing the SIM Card
The gateway comes with a pre-installed SIM card. You can replace the SIM card by pressing the card into the card slot.
Before replacing the SIM card, please read the following safety information. Always use insulated tools and follow proper safety precautions when connecting or ‘
Danger 1: Hazardous electrical voltages and currents can cause serious
physical harm. disconnecting power circuits.
Danger 2: Ensure the gateway’s power supply is unplugged from the power strip or wall outlet before proceeding.
Caution: Keep indoor devices out of direct sunlight. Prolonged exposure to
direct sunlight can damage the device.
Refer to the section “Technical Specifications” for the gateway’s operating temperature ranges.
Access the SIM card from the bottom side of the gateway.
-
Power off the gateway by removing the power cable from the electrical outlet and from the gateway
-
Press and release the top latch of windowsill bracket to detach the bracket from the gateway
-
Remove any Ethernet cables connected to the gateway’s LAN ports (LANT and LAN 2)
-
Use the finger pull to open the SIM door
-
The SIM card socket supports push-in and push-out installation
-
With the SIM door open, press the pre-installed SIM card into the slot and the SIM card pops out
-
Carefully remove the pre-installed SIM card
-
Insert and press the new SIM card into the slot
-
Be sure the SIM card clicks into place to ensure that it is properly installed
-
Close the cover of the SIM card slot and ensure the cover is securely closed on the SIM door
Factory Resetting the T-Mobile 5G Gateway
Resetting the T-Mobile 5G Gateway to factory default deletes all configuration changes made since setup.
Using the Reset Port
You can reset the gateway using a paperclip and the Reset port, which is located on the device’s backside.
-
Press-and-hold a paperclipping the Reset port for 5 seconds
-
Withdraw the paperclip. LCD shows:
- Factory reset in progress
- T-Mobile animated logo
- Power up animation
-
On the LCD, press OK and you will see the Connection screen
Troubleshooting
No Internet
- Verify devices powered on with LCD screen
- Check SIM card is present and seated correctly
- Tryplacing the gateway i a different location
- Tryfactory reset
No Signal
This LCD alert indicates there is no network signal, which could mean local cellular equipment s down for any number of reasons, or the gateway may need to be re- positioned. If the connection does not improve in a reasonable amount of time, you can contact T- Mobile customer service or refer to the section “Manual Setup: Identify An Ideal Location”.
Prevent Overheating
Avoid prolonged exposure to the direct sunlight, particular in warm climates. Also, make sure that obstacles never obstruct airflow vents on the top or bottom of the gateway’s enclosure. Allow at least 100mm/4in clearance on all sides of the enclosure. Ensure the gateway is at least 3 feet from baseboard heaters. If the gateway feels hot to touch, unplug it immediately and let the device cool before plugging iti n again.
T-Mobile SG Gateway Does Not Start
If the gateway does not start up, verify the provided power adapter is connected to a working outlet and plugged into the power USB-C port on the gateway. If the gateway is connected to an outlet and power still does not start, contact T-Mobile technical support.
Poor Internet Experience
If you feel your overall internet experience is poor, try repositioning the gateway; refer to the section “Manual Setup: Identify An Ideal Location”.
Forget Your Admin Password?
If you configure a custom admin password and forget i, use the password reset function found within the T Mobile Internet mobile app to reset the password to factory default.
Understanding the LCD
The gateway’s LCD is located on front of the device. The LCD serves as a dashboard where you can quickly obtain information of the following types:
- Connection
- Devices
- InternetLine Number
- Messages
- Antenna
- Language Settings
Press left or right arrow (< or >) on the LCD panel with your finger to move between screens. The position of the illuminated dot on the bottom of the screen indicates where you are in the screen sequence.
The Connection screen is the first displayed after a successful start up sequence.
Connection
Like your phone, the gateway displays up to five bars onits Connection screen, indicating signal strength.
The number of bars you see represents the strength of the gateway’s current connection to the cellular network.
An Xindicates the gateway is not connected to the T-Mobile network.
Devices
The Devices screen indicates how many devices are currently connected to the gateway. This is true for both wireless and wired devices.
Internet Line Number
The Internet Line Number screen displays your internet number of the SIM card installed.
Messages
These messages come from the T-Mobile network and may provide outage information or other important updates.
The Messages screen allows you to view the message contents by pressing < and
to scroll between messages.
To delete a message:
-
Press0 (OK) on the panel to select VIEW MESSAGES and view unread messages
-
Select NEXT and read next message
-
Select DONE when your read all messages
-
Select DELETE to delete a message
- When prompted a message of asking you to confirm deletion, select YES to confirm
- Select DONE when you finish
Antenna Settings
In addition to the embedded internal antenna, the gateway also provides optional external antenna ports for optimal performance of cellular signal strength. You may change the antenna settings to EXTERNAL if an external antenna is attached.
-
From the Antenna screen, select CHANGE
-
From the Antenna screen, you can choose:
- INTERNAL
- EXTERNAL if an external antenna is attached
NOTE: Only change this setting to EXTERNAL when an external antenna is attached.
-
When prompted a message of asking you to confirm your selection, tab OK to confirm
Language Settings
The gateway supports both English and Spanish on its LCD. You may change the language by doing:
-
From the Language screen, select CHANGE
-
From the Language screen, choose English or Espafiol
-
Press O (OK) on the panel to set the language
Technical Specifications
Dimensions : 228 (H)x 180 (W) x 76 (0) mm
Weight : 8809 1.94 lbs
Operating environment: 0 to40°C 3210104 °F
10T/ GPSL : Bluetooth 5.1 GPs
Power adapter : AC
Powerinput :100 – 240V, 3A @ DC 15V, 50/60Hz
T heoretical power consumption : 45w
Wi-Fi connectivity : Tax 4×4 2.4G TMax 4×4 56 Seamless roaming
Security :WPA/WPA2/WPA3
Buttons: Reset (recessed switch) Arrow Keys (Left &Right) Enter (OK)
Display: TFTLCD Non-Touch Panel 24-Inch 240×320 Resolution
Mobile Band : 56 NR: n25, n41, n48,n66, 71, n77 (DoD and C-Band) 4G LTE:
B2, B4, BS, B12, B2S, B48, B66, B71
Physical Interfaces: GE LAN (Yellow) SIM Card Socket (4FF Only) USB Type
C x 1 (Regular Power Source) USB Type C x1(Data and other USB Port Purpose)
Terms and Conditions
t-mobile.com/responsibility/legal/terms-and-
conditions
Privacy Policy
t-mobile.com/privacy-center/our-practices/privacy-
policy
Customer Support
24/7 Tech Support Line:
1-844-275-9310
Metro Support Line : 1-888-8Metro8
Release 1.0.0
Manufacturer:: Arcadyan Technology Corporation
No.8, Sec.2, Guangfu Rd., Hsinchu City 30071, Taiwan
Import from: Arcadyan Technology Corporation
Distributor: T-Mobile USA, Inc.
© 2023 T-Mobile USA, Inc. All rights reserved.
T-Mobile, the T logo, Magenta, the magenta color and the T-Mobile Internet
logo are registered trademarks of Deutsche Telekom AG.
References
- T-Mobile Privacy Policy Notice | T-Mobile Privacy Center
- Terms & Conditions | T-Mobile Legal Center
- Welcome to T-Mobile Internet | T-Mobile
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>