FELKER Mason Mite II Masonry Refractory Saw Electric and Gasoline Instruction Manual

: June 15, 2024
: FELKER

Table of Contents

Mason Mite II Masonry Refractory Saw Electric and Gasoline
Specifications
Diagram 1 – Upper Saw Assembly, Electric Models (19MAR98)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OPERATING INSTRUCTIONS AND PARTS LIST

Mason Mite II Masonry Refractory Saw Electric and Gasoline

$FELKER Mason Mite II Masonry Refractory Saw Electric and Gasoline$

MODEL: Mason Mite II / SPS II
Masonry / Refractory Saw
Electric & Gasoline Models

DECAL DESCRIPTIONS AND LOCATIONS

P/N 170697
Location: Water Pan Sides
(Qty. 2) All Models

P/N 170247
Location: Water Pan
(Qty. 2) All Models

P/N 169065
Location: Muffler
(Qty. 1) Gas Models

P/N 046326
Location: Motor
(Qty. 1) Electric Models

$FELKER Mason Mite II Masonry Refractory Saw Electric and Gasoline - Symbol 3$

P/N 177588
Location: Blade Guard
(Qty. 1) All Models

P/N 046327
Location: Motor
(Qty. 1) Electric Models

Specifications

MODEL NO.| SPS-1| SPS-2| SPS-3| SPS-55| SPS-6
TYPE| 1-1/2 HP Electric| 2 HP Electric| 3 HP Electric| 5.5 HP Gasoline| 6 HP Gasoline
Item No.
(with Water Pump)| 173335| 170826| 170995| 173258| 173499
Blade Guard Capacity:| 10 – 14″
(250 – 350 mm)| 10 – 14″
(250 – 350 mm)| 10 – 14″
(250 – 350 mm)| 14″ Only
(350 mm)| 14″ Only
(350 mm)
Blade Shaft RPM:| 2509| 2509| 2509| 2950| 2950
Max. Depth of Cut:| 5.0″ (127 mm)
Blade Arbor Size:| 1.00″ (25.4 mm)
Blade Shaft:| Sealed Ball Bearings
Blade Shaft Drive:| Two 4L370 V-Belts Two 4L370 V-Belts Two 4L370 V-Belts| 3VX V-Belt (2 Band)| 3VX V-Belt (2 Band)
Blade Guard:| One Piece Steel, Sta-LevelTM Design, 14″ (350 mm) Maximum Capacity
Blade Coolant:| Water
Water Pan:| 3.86 x 17.73 x 30.73 Inch (98 x 450 x 780.5 mm), 6.75 Gallon (25 Liter) Capacity (At 3″ Depth)
Conveyor Cart:| Cast Aluminum w/ Vulcanized Rubber Top, Adjustable Measuring Rule, 45° / 90° Cutting Guide
Water Pump:
Electric Models: Gasoline Model:| 300 Gallons / Hour, Submersible, Totally Epoxy Sealed, Thermal Over Load Protected 8 GPM, Belt Drive, Solid Bronze, With Strainer & Built-In Priming Pump with Check Valve
Frame:| Heavy duty, Jig Welded “X” Braced Steel, Open Throat Design For Unlimited Ripping
Weight: Pounds (kg)
Saw Crated:| 171 (77.7)| 182 (82.7)| 192 (87.3)| 209 (95.0)| 209 (95.0)
Saw Uncrated:| 160 (72.7)| 169 (76.8)| 181 (82.3)| 198 (90.0)| 198 (90.0)
Saw Operating (Water in Pan):| 221 (100.5)| 230 (104.5)| 242 (110.0)| 259 (117.7)| 259 (117.7)
Folding Stand (Unboxed):| 24 (10.9)| 24 (10.9)| 24 (10.9)| 24 (10.9)| 24 (10.9)
Foot Pedal Kit (Boxed):| 14 (6.4)| 14 (6.4)| 14 (6.4)| 14 (6.4)| 14 (6.4)
Electric Cord:| 0.40 (.18 )| N / A| N / A| N / A| N / A
Power Source
MODEL NO.| SPS-1| SPS-2| SPS-3| SPS-55| SPS-6
TYPE| Electric| Electric| Electric| Gasoline| Gasoline
Engine / Motor:| Baldor| Baldor| Baldor| Honda| Robin
Horsepower (kw):| 1-1/2 (1.1)| 2 (1.5)| 3 (2.2)| 5.5 (4.0)| 5.7 (4.2)
RPM:| 3450| 3450| 3450| 3500| 3500
Specifications:| T.E.F.C| T.E.F.C| T.E.F.C| ———| ———
Voltage:| 115 / 208-230| 115 / 208-230| 208-230| ———| ———
Cycle (Hz) / Current / Phase:| 60 / A.C. / 1| 60 / A.C. / 1| 60 / A.C. / 1 | ———| ———
Displacement:| ———| ———| ———| 9.9 cu. Inch (163 cc)| 10.3 cu. Inch (169 cc)
Bore:| ———| ———| ———| 2.7 inch (68 mm)| 2.64 inch (67 mm)
Stroke:| ———| ———| ———| 1.8 inch (45 mm)| 1.89 inch (48 mm)
Cylinders / Cycle:| ———| ———| ———| 1 / 4| 1 / 4
Fuel Capacity:| ———| ———| ———| .95 Gallon (3.6 liter) .95 Gallon (3.6 liter)
Oil Capacity:| ———| ———| ———| .63 Quart (.6 liter)| .63 Quart (.6 liter)
Air Filter:| | ———| ———| Dry Type
Dual Element with Precleaner| Dry Type
Dual Element with Precleaner
Starter:| Capacitor| Capacitor| Capacitor| Recoil| Recoil
Coolant:**| Air| Air| Air| Air| Air

50 cycle motors available upon special request: 2 HP model is 240 Volt, 3 HP model is 220-380 Volt
3 phase motor available upon special request – specify 230 or 460 volts for factory wiring.
Note:** For item numbers on motors / engine see parts list section of this document. Specifications are subject to change without notice.

Diagram 1 – Upper Saw Assembly, Electric Models (19MAR98)

$FELKER Mason Mite II Masonry Refractory Saw Electric and Gasoline - Diagram 1$

Diagram 1 – PARTS LIST(13 March 2002)

DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION| DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION
---|---|---|---|---|---|---|---
1| 000605| 1| Motor & Switch, 1.5 hp 115/208-230/60/1 (A)| 35| 020572| 1| Setscrew, Soc. Hd #10-24UNC x 1/2″
—| 169422| 1| Motor & Switch, 1.5 hp 115/60/1 (B)| 36| 030822| 3| Wheel
—| 000716| 1| Motor & Switch, 2 hp 115/208-230/60/1| 37| 020763| 3| Washer, Flat 3/8″
—| 169656| 1| Motor & Switch, 3 hp 115/208-230/60/1| 38| 032366| 3| Nut, Keps 5/16″-18UNC
—| 000806| 1| Motor & Switch, 3 hp 208-230/460/60/3| 39| 060504| 1| Pulley, 2GA2.0-7/8 w/ SS (60 Hz)
2| 021416| 4| Capscrew,5/16″ – 18UNC x 1″ (1.5 & 2HP)| —| 060519| 1| Pulley, 2GA2.25-7/8 w/SS (50 Hz)
—| 020323| 4| Cap screw, 3/8″ -16UNC x 1″ (3HP Only)| —| 172101| 1| Pulley, 6GJ2.80-5/8 w/ SS (B)
3| 020742| 4| Washer, Flat 5/16″ (1-1/2 & 2 HP)| 40| 020062| 1| Key, 3/16″ Sq. x 1-1/4″ (Replacement)
—| 020743| 4| Washer, Flat 3/8″ (3 HP Only)| 41| 020550| 2| Setscrew, 5/16″ – 18UNC x 3/8″
4| 020197| 4| Locknut, Fiber 5/16″-18UNC (1.5 & 2 HP)| 42| 032080| 1| Switch, Motor w/ wiring – 1 Phase
—| 020199| 4| Locknut, Fiber 3/8″-16UNC (3 HP Only)| —| 030071| 1| Switch, Motor w/ wiring – 3 Phase
5| 032605| 1| Water Pump Assy-115V, G300 (Incl 6 & 7) (A)| 43| 177427| 1| Bracket, Belt Guard (1-1/2 & 2HP)
—| 032606| 1| Water Pump Assy-230V, G300 (Incl 6 & 7)| —| 177426| 1| Bracket, Belt Guard (3 HP)
—| 177701| 1| Water Pump Assy-115V, G100 (Incl 6 & 7) (B)| 44| 020489| 2| Screw, Hex Washer Hd 1/4″-20×3/4″
5A| 032124| 1| Repair Kit, G300 Water Pump(Incl 5B – 5J)| 45| 020741| 2| Washer, Flat 1/4″
—| 161049| 1| Repair Kit, G100 Water Pump (Incl 5B – 5J)| 46| 020784| 2| Lock washer, 1/4″
5B| 032072| 1| Impeller (G300)| 47| 020195| 2| Locknut, Hex 1/4″ – 20UNC
—| 161052| 1| Impeller (G100)| 48| 020414| 2| Screw, Round Hd 1/4″ – 20UNC x 1/2″
5C| 050171| 1| Screen (G300 & G100)| 49| 020741| 2| Washer, Flat 1/4″
5D| 161490| 1| Plate, Front (G300)| 50| 060510| 1| V-Belt, AX35 Set of 2
—| 161054| 1| Plate, Front (G100)| —| 030063| 1| V-Belt, 360J6 (B)
5E| 032093| 1| Volute (G300)| 51| 170616| 1| Guard, Belt
—| 161051| 1| Volute (G100)| 52| 020370| 1| Cap screw, Hex 1/4″ – 20UNC x 3/4″
5F| 032094| 1| Gasket (G300 & G100)| 53| 020741| 1| Washer, Flat 1/4″
5G| 032122| 3| Screw, Rd Hd, #8-18 x 1/2″ (G300 & G100)| 54| 020195| 1| Locknut, Fiber 1/4″ – 20UNC
5H| 032123| 4| Screw, Flat Hd, #8-18 x 1/2″(G300 & G100)| 55| 060495| 1| Pulley, 2GA3.00-.75 w/ Setscrew
5J| 032095| 1| O – Ring (G300)| —| 175261| 1| Pulley,6GJ2.25-.75 w/ Setscrew (B)
—| 161053| 1| O – Ring, #30 (G100)| 56| 020062| 1| Key 3/16″ Sq. x 1.25″
6| 030654| 1| Fitting, Hose| 57| 020550| 2| Setscrew, Soc Hd. 5/16″ – 18UNCx3/8″
7| 161776| 1| Tubing, Vinyl 3/8″ I.D. x 42″ Long| 58| 139273| 2| Bearing
8| 161176| 1| Fitting, Elbow, Barb 1/4 NPTx3/8″ Hose| 59| 030004| 1| Washer, Spring
9| 090578| 1| Valve, w/ Hose Fitting| 60| 031022| 1| Shaft, Blade
9A| 020813| 1| Fitting, Street Elbow, 1/4″ NPT x 90º| 61| 020089| 1| Key, Woodruff (ANSI #403)
Only for models before 2002.
10| 030870| 1| Manifold| 62| 177416| 1| Housing
11| 030875| 1| Gasket, Manifold| 63| 020314| 4| Cap screw, Hex Hd. 5/16″ – 24UNF x 3/4″
12| 020425| 2| Screw, Rnd Hd #10 – 32 x 1/2″ Brass| 64| 020763| 4| Washer, Flat 5/16″ SAE
13| 030865| 2| Water Tube, 14″| 65| 020785| 4| Lock washer, 5/16″
14| 020424| 1| Screw, Rnd Hd #10 – 32 x 3/8″ Brass| 66| 032501| (as req)| Shim, .005″ Thick
15| 020426| 1| Screw, Flat Hd #10 – 32 x 3/8″ Brass| —| 032502| (as req)| Shim, .015″ Thick
16| 060435| 1| Track, Blade Guard| —| 032503| (as req)| Shim, .020″ Thick
17| 020701| 5| Rivet, Pop| 67| 139274| 1| Spacer
18| 020762| 10| Washer, Flat 1/4″ SAE| 68| 030945| 1| Collar, Inner
19| 031045| 1| Ball and Joint| 69| 030951| 1| Collar, Outer
20| 020171| 2| Nut, Hex Jam 3/8″ – 24| 70| 020378| 1| Cap screw, Hex 1/2″ – 20UNF x 1″
21| 060455| 1| Link| 71| 031019| 1| Blade Shaft Assembly
22| 060460| 1| Yoke| | | | (Includes Items: 58-62 & 67-70)
23| 060465| 1| Pin| | | |
24| 020611| 1| Pin, Cotter 3/32″ x 5/8″ Long| 72| 173120| 1| Cord, Adapter, 10″ Long,115V
25| 020764| 2| Washer, Flat 3/8″ SAE| —| ——| —| 15A Straight to 20A Twist-Lock
26| 170862| 1| Blade Guard Assy-w/Decals (Item 8-18)| —| ——| —| (Accessory: 1-1/2 HP Motor Only)(A)
27| 177425| 1| Platform, Motor| | | |
28| 030580| 2| Bearing, Head Pivot| 73| 177433| 1| Arm, Counter Balance
29| 020553| 4| Setscrew,1/4″ – 28UNF x 1/4″| 74| 030285| 1| Nut, Handle, 1/2″ – 13UNC
30| 060411| 1| Draw bolt Weldment, 3/8″ – 16UNC| 75| 020745| 2| Washer, Flat, 1/2″
—| 177696| 1| Draw bolt Weldment, 3/8″ – 16UNC (B)| 76| 030251| 1| Eyebolt, 5/16″ – 18UNC x 1-1/2″
31| 020764| 1| Washer, Flat 3/8″| 77| 020169| 1| Nut, Hex Jam, 5/16″ – 18UNC
32| 020199| 1| Locknut, Fiber 3/8″ – 16UNC| 78| 020373| 1| Cap screw, 5/16″ – 18UNC x 1-1/2″
33| 186215| 1| Handle (90°)| 79| 020197| 2| Locknut, Fiber, 5/16″ – 18UNC
—| 186218| 1| Handle Kit (Incl. 33, 34, hardware, instructions & template)| 80| 060395| 1| Spring, Head Balance
34| 139568| 1| Grip, Handle (For 90° handle-186215.)| | | |
—| 043935| 1| Grip, Handle (For old straight handle.)| | | |

(A) for Model SPS1
(1.5 hp, 115 / 230 Volt – Has Voltage Change Switch & Remote Mounted ON/OFF Switch)
(B) for Model SPS1S
(1.5 hp, 115 Volt Only – DOES NOT Have Voltage Change Switch Or Remote Mounted ON/OFF Switch)

Diagram 2 – Lower Saw Assembly, Electric Models (14jan97)

$FELKER Mason Mite II Masonry Refractory Saw Electric and Gasoline - Diagram 2$

DIAGRAM 2 – PARTS LIST (19MARCH98)

DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION| DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION
---|---|---|---|---|---|---|---
1| 177409| 1| Pan Weldment| 26| 177401| 1| Skid Kit (Optional)
2| 030386| 1| Drain Plug Assembly| 27| 177399| 2| Skid, Wooden
3| 030971| 1| Clamp, Bearing, w/ Tilt Arm| 28| 020509| 4| Cap screw, Hex Hd. 3/8″ – 16UNC x 2″
4| 020330| 2| Cap screw, Hex Hd. 3/8″ – 16UNC x 3″| 29| 020743| 4| Washer, Flat 3/8″
5| 020199| 2| Locknut, Hex 3/8″ – 16UNC| 30| 020199| 4| Locknut, 3/8″ – 16UNC
6| 030610| 2| Knob, Hand (early models only)| 31| 161195| 4| Pad, Skid
—| 048742| 2| Cap screw, Hex 5/16″ – 18UNC x 1-1/4″| 32| 020743| 4| Washer, Flat 3/8″
—| 020763| 2| Washer, Flat, 5/16″ SAE| 33| 020745| 8| Washer, Flat 1/2″
7| 030591| 1| Clamp, Bearing| 34| 020199| 4| Locknut, 3/8″ – 16UNC
8| 177383| 1| Wrench, Blade Shaft| 35| 030402| 1| Curtain, Splash
9| 030343| 1| Conveyor Cart Kit, Complete| 36| 034050| 1| Foot Pedal Kit (Optional)
10| 030049| 1| Wheel Kit, Set of 4, w/ Nuts| 37| 034051| 1| Foot Pedal
11| 030822| 4| Wheel, Cart| 38| 034055| 1| Support, Foot Pedal
12| 032366| 4| Nut, Keps 5/16″ – 18UNC| 39| 034058| 1| Support, Pedal, Right
13| 020763| 2| Washer, Flat, 5/16″ SAE| 40| 034059| 1| Support, Pedal, Left
14| 177650| 1| Backstop (Electric & Robin Gas)| 41| 020329| 1| Cap screw, Hex 3/8″ – 16UNC x 2-3/4″
15| 020301| 3| Cap screw, Hex Hd. 1/4″ – 20UNC x 5/8″| 42| 020199| 1| Locknut, 3/8″ – 16UNC
16| 020784| 3| Lock washer, Split 1/4″| 43| 020238| 1| Wingnut, 3/8″ – 16UNC
17| 020133| 3| Nut, Hex 1/4″ – 20UNC| 44| 020323| 1| Cap screw, Hex 3/8″ – 16UNC x 1″
18| 030371| 1| Ruler Set, Conveyor Cart (Electric)| 45| 160080| 1| Pin, Snapper
19| 020432| 5| Screw, Pan Head #10 – 24UNC x 3/8″| 46| 034061| 1| Rod, Tilt
20| 030362| 1| Insert, Wood Assembly| 47| 034062| 1| Yoke
21| 170038| 1| Tubing, 3/8″ID x 5/8″ (Cut in half at Assy)| 48| 020509| 1| Cap screw, Hex Hd.3/8″ – 16UNC x 2″
22| 020699| 2| Wood Screw, Round #8 x 1″| 49| 020199| 1| Locknut, Hex 3/8″ – 16UNC
23| 030350| 1| Guide, Measuring (Includes Item 24)| 50| 020313| 1| Cap screw, Hex Hd. 5/16″ – 18UNC x 3/4″
24| 020600| 1| Screw, Thumb 5/16″ – 18UNC x 1″ Long| 51| 020785| 1| Lock washer, Split, 5/16″
25| 034040| 1| Stand Assembly (Optional)| 52| 020134| 1| Nut, Hex 5/16″ – 18UNC

Diagram 3 – Upper Saw Assembly, Gasoline Models (13 March 2002)

$FELKER Mason Mite II Masonry Refractory Saw Electric and Gasoline - Diagram 3$

Diagram 3 – Parts List (Rev: 13 March 2002)

DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION| DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION
---|---|---|---|---|---|---|---
1| 177299| 1| Platform Weldment| 65| 020785| 4| Lock washer, Split, 5/16″
2| 177696| 1| Draw bolt Weldment, 3/8″ – 16UNC| 66| 032501| (as req.)| Shim, .005″ Thick
3| 020764| 1| Washer, Flat 3/8″ SAE| —| 032502| (as req.)| Shim, .015″ Thick
4| 020199| 1| Locknut, Fiber 3/8″ – 16| —| 032503| (as req.)| Shim, .020″ Thick
5| 048740| 4| Cap screw, Hex Hd., 3/8″ – 16 x 1-1/4″| 67| 177289| 1| Shaft, Blade, LH Thread
6| 020743| 4| Washer, Flat 3/8″| 68| 030004| 1| Washer, Spring
7| 020199| 4| Locknut, Fiber 3/8″ – 16| 69| 020169| 1| Nut, Hex Jam Thin 5/16″-18
8| 030822| 3| Wheel| 70| 060106| 1| Pulley, 2G3V3.15 – .75 w/ Setscrew
9| 020763| 3| Washer, Flat 5/16″ SAE| 70A| 020550| 2| Setscrew, Socket Hd., 5/16″-18 x 3/8″
10| 032366| 3| Nut, Keps 5/16″ – 18UNC| 71| 020062| 1| Key, 3/16″ Sq. x 1-1/4″
11| 177300| 1| Shield, Water| 72| 177385| 1| Support Weldment, Spring Top
12| 020301| 2| Cap screw, Hex Hd., 1/4″ – 20 x 5/8″| 73| 020323| 2| Cap screw, Hex Hd., 3/8″-16 x 1″
13| 020195| 2| Locknut, Fiber 1/4″ – 20| 74| 020199| 2| Locknut, Fiber 3/8″-16
14| 020572| 1| Setscrew, Socket Hd., #10 – 24 x 1/2″| 75| 177387| 1| Support, Spring Bottom
15| 186215| 1| Handle (90°)| 76| 030251| 1| Eye Bolt, 5/16″-18 x 2″
—| 186218| 1| Handle Kit (Incl. 15, 16, hardware, instructions & template)| 77| 020329| 2| Cap screw, Hex Hd., 3/8″-16 x 2-3/4″
16| 139568| 1| Grip, Handle (For 90° handle-186215)| 78| 020764| 2| Washer, Flat, 3/8″ SAE
—| 043935| 1| Grip, Handle (For old straight handle.)| 79| 020199| 2| Locknut, Fiber 3/8″
17| 161197| 1| Isolator, Engine 40-45 Durometer| 80| 048740| 1| Cap screw, Hex Hd., 3/8″-16 x 1-1/4″
18| 020329| 1| Cap screw, Hex Hd., 3/8″ – 16 x 2-3/4″| 81| 020199| 1| Locknut, Fiber 3/8″-16
19| 020329| 3| Cap screw, Hex Hd., 3/8″ – 16 x 2-3/4″| 82| 060395| 1| Spring
20| 161196| 3| Isolator, Engine 30-35 Duro| 83| 177389| 1| Arm, Counterbalance
21| 177348| 1| Plate, Engine Base| 84| 020745| 2| Washer, Flat 1/2″
22| 177307| 1| Plate, Engine| 85| 174679| 1| Handle, Lock
23| 020199| 4| Locknut, Fiber 3/8″ – 16| 86| 163212| 1| Knob (Early Models Only)
24| 020373| 4| Cap screw, Hex Hd.,5/16″ – 18 x 1-1/2″| 87| 177381| 1| Belt Guard w/ Decal
25| 020763| 5| Washer, Flat 5/16″ SAE| 88| 177296| 1| Support, Belt Guard
26| 020197| 4| Locknut, Fiber 5/16″ – 18| 89| 020370| 3| Cap screw, Hex Hd., 1/4″-20 x 3/4″
27| 173098| 1| Engine, 5.5HP Honda| 90| 020195| 3| Lock nut, Fiber 1/4″-20
27| 190238| 1| Engine, 6HP Robin| 91| 020370| 4| Cap screw, Hex Hd., 1/4″-20 x 3/4″
28| 177356| 1| Pulley, 3G3V2.65 – .75 w/Setscrews| 92| 020784| 4| Lock washer, Split 1/4″
28A| 020541| 2| Setscrew, Socket .Hd. 1/4″-20 x 3/8″| 93| 020741| 4| Washer, Flat 1/4″
29| 020063| 1| Key, 3/16″ Sq. x 1-1/2″ (Replacement)| 94| 177380| 1| V-Belt, 2/3VX425 (2-Band)
30| 177382| 1| Fitting, Oil Drain M10 x 1.25 x .38 Barb (55H)| 95| 177439| 1| V-Belt, 3L x 39 Links (For water pump)
30| 177065| 1| Fitting, Oil Drain M14 x 3/8 Barb (60R)| 96| 177405| 1| Cover, Rear Belt Grd (w/o H2O Pump)
31| 020049| 1| Clamp, Hose| 97| 020313| 2| Cap screw, Hex Hd., 5/16″-18 x 3/4″
32| 167304| 1| Hose Assembly, Oil Drain| 98| 020197| 2| Locknut, Fiber 5/16″-18
33| 167307| 1| Cap, Blanking| 99| 177346| 1| Shield, Front, Water Pump
34| 167622| 1| Nut, Tube M16| 100| 177342| 1| Support Weldment
35| 166676| 1| Clamp, Insulated| 101| 020323| 4| Cap screw, Hex Hd., 3/8″-16 x 1″
36| 171729| 1| Blade Guard Assy (Incl. 37-47 & 53-55)| 102| 020764| 4| Washer, Flat 3/8″ SAE
37| 177291| 1| Blade Guard Weldment, 14″| 103| 020199| 4| Locknut, Fiber 3/8″-16
38| 030865| 2| Water Tube 14″| 104| 177357| 1| Bracket, Draw bolt
39| 020426| 1| Screw, Machine Flat #10 – 32 x 3/8″| 105| 177378| 1| Cap screw, Hex Hd., 5/16″-18 x 2″
40| 020424| 1| Screw, Machine Round #10 – 32 x 3/8″| 106| 020197| 2| Locknut, Fiber 5/16″-18
41| 031045| 1| Joint, Ball| 107| 177344| 1| Shield, Rear, Water Pump
42| 020171| 3| Nut, Thin Jam 3/8″ – 24| 108| 021423| 6| Cap screw, Hex Hd., 1/4″-20 x 1/2″
43| 060435| 1| Track, Blade Guard| 109| 020784| 6| Lock washer, Split 1/4″
44| 020701| 5| Rivet, Pop| 110| 020762| 6| Washer, Flat 1/4″ SAE
45| 020762| 10| Washer, Flat 1/4″ SAE| 111| 177375| 1| Pump, Water (Modified)
46| 030870| 1| Manifold| —| 177424| 1| Repair Kit, Water Pump (Not Shown)
47| 030875| 1| Gasket, Water Manifold| 112| 177354| 1| Pulley,1G3V2.65 – .625, w/ Setscrews
48| 060455| 1| Rod Link| 113| 020541| 2| Setscrew, Socket Hd., 1/4″-20 x 3/8″
49| 060460| 1| Yoke| 114| 020306| 2| Cap screw, Hex Hd., 1/4″-20 x 1″
50| 060465| 1| Pin, Clevis| 115| 020762| 2| Washer, Flat 1/4″ SAE
51| 020611| 1| Pin, Cotter| 116| 020195| 2| Locknut, Fiber 1/4″-20
52| 020425| 2| Screw, Machine #10 – 32 x 1/2″| 117| 020815| 2| Fitting, Street Elbow, 3/8″ NPT x 90°
53| 161176| 1| Fitting, 90° Elbow 1/4″ – 18, 3/8″ Barb| 118| 020819| 2| Fitting, 3/8″ NPT x 3/8″ Barb
54| 090578| 1| Valve, 1/4″ – 18NPT| 119| 161225| 1| Tubing, 3/8″ ID x 16″ Long
55| 020813| 1| Fitting, 90° Street Elbow 1/4″ – 18 NPT| 120| 161158| 1| Bulb, Primer
56| 177305| 1| Blade Shaft Assy. (Incl. 57-62 & 67-68)| 121| 161194| 1| Tubing, 3/8″ ID x 12″ Long
57| 177290| 1| Cap screw, Hex Hd.,1/2″-20UNF-LH x 1.0″| 122| 161181| 1| Fitting, 90° Elbow 1/2NPT x 3/8″ Barb
58| 030951| 1| Collar, Outer| 123| 161159| 1| Strainer, Suction
59| 030945| 1| Collar, Inner| 124| 030580| 2| Bearing, Head Pivot
60| 139274| 1| Spacer| 124A| 020553| 4| Setscrew, Socket Hd., 1/4″-28 x 1/4″
61| 139273| 2| Bearing| 125| 177379| 1| Tubing, 3/8″ ID x 32″ Long
62| 177416| 1| Housing, Blade Shaft| 126| 020764| 2| Washer, Flat 3/8″ SAE
63| 020314| 4| Cap screw, Hex Hd., 5/16″ – 24 x 3/4″| 127| 020089| 1| Key, Woodruff (ANSI #403)
64| 020763| 4| Washer, Flat 5/16″ SAE| 128| 163187| 4| Washer, Flat .06 x .38ID x 1.5″OD

Diagram 4 – Lower Saw Assembly, Gasoline Model

$FELKER Mason Mite II Masonry Refractory Saw Electric and Gasoline - Diagram 4$

DIAGRAM 4 – PARTS LIST (19MAR98)

DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION| DIAG. LOC.| PART NO.| QTY. REQ.| DESCRIPTION
---|---|---|---|---|---|---|---
1| 177409| 1| Pan Weldment| 26| 177401| 1| Skid Kit (Optional)
2| 030386| 1| Drain Plug Assembly| 27| 177399| 2| Skid, Wooden
3| 030971| 1| Tilt Arm Clamp| 28| 020509| 4| Cap screw, Hex Hd., 3/8″ – 16 x 2″
4| 020330| 2| Cap screw, Hex Hd., 3/8″ – 16 x 3″| 29| 020743| 4| Washer, Flat 3/8″
5| 020199| 2| Locknut, Fiber 3/8″ – 16| 30| 020199| 4| Locknut, Fiber, 3/8″ – 16
6| 030610| 2| Knob, Hand (early models)| 31| 161195| 4| Pad, Skid
—| 048742| 2| Cap screw, Hex Hd., 5/16″ – 18 x 1-1/4″| 32| 020743| 4| Washer, Flat 3/8″
—| 020763| 2| Washer, Flat, 5/16″ SAE| 33| 020745| 8| Washer, Flat 1/2″
7| 030591| 1| Clamp| 34| 020199| 4| Locknut, Fiber, 3/8″ – 16
8| 177383| 1| Wrench, Blade Shaft| 35| 030402| 1| Curtain, Splash
9| 177303| 1| Conveyor Cart Kit, Complete| 36| 034050| 1| Foot Pedal Kit (Optional)
10| 030049| 1| Wheel Kit, Set of 4, w/ Nuts| 37| 034051| 1| Foot Pedal
11| 030822| 4| Wheel, Cart| 38| 034055| 1| Support, Foot Pedal
12| 032366| 4| Nut, Keps 5/16″ – 18UNC| 39| 034058| 1| Support, Pedal, Right
13| 020763| 2| Washer, Flat 5/16″ SAE| 40| 034059| 1| Support, Pedal, Left
14| 177652| 1| Backstop, Honda Gas| 41| 020329| 1| Cap screw, Hex Hd., 3/8″ – 16 x 2-3/4″
15| 020301| 3| Cap screw, Hex Hd., 1/4″ – 20 x 5/8″| 42| 020199| 1| Locknut, Fiber 3/8″ – 16
16| 020784| 3| Lock washer, Split, 1/4″| 43| 020238| 1| Wingnut, 3/8″ – 16
17| 020133| 3| Nut, Hex 1/4″ – 20 RH| 44| 020323| 1| Cap screw, Hex Hd., 3/8″ – 16 x 1″
18| 177404| 1| Ruler Set, Conveyor Cart (Gas Model)| 45| 160080| 1| Pin, Snapper
19| 020432| 5| Screw, Pan Head #10-24 x 3/8″| 46| 034061| 1| Rod, Tilt
20| 030362| 1| Insert, Wood Assembly| 47| 034062| 1| Yoke, Tilt Rod
21| 170038| 1| Tubing, 3/8″ ID x 5/8″ (Cut in half at Assy)| 48| 020509| 1| Cap screw, Hex Hd., 3/8″ – 16 x 2″
22| 020699| 2| Wood Screw, Round Hd., #8 x 1″| 49| 020199| 1| Locknut, Fiber 3/8″ – 16
23| 030350| 1| Guide, Measuring (Incl. Item 24)| 50| 020313| 1| Cap screw, Hex Hd., 5/16″ – 18 x 3/4″
24| 020600| 1| Screw, Thumb, 5/16″ – 18 x 1″ Flat Pt| 51| 020785| 1| Lock washer, Split, 5/16″
25| 034040| 1| Stand Assembly (Optional)| 52| 020134| 1| Nut, Hex 5/16″ – 18