EENOUR U1000PRO Laser Rangefinder for Golf User Manual

**EENOUR U1000PRO Laser Rangefinder for Golf User Manual

**

Safety Regulations

Please read the safety regulations and operation guide carefully before operating. Improper operation without complying with this manual guide could cause damage to the device or inaccurate measurement. 45 Do not open or repair the laser rangefinder in any way, and itis stricty forbidden to illegally modify or change the performance of the laser transilter of the item. Please do not place it in a place ‘where children can reach it
The electromagnetic radiation instrument may cause interference to laser rangefinder, so please do ot use the laser rangefinder near aircraft or medical equipment. Do not use the tem in a. flammable and explosive environment.
Discarded laser rangefinder can not be disposed like household garbage, please handle them in line with related law and regulations.
Should you have any questions or problems on this item, please freely contact us (email [email protected]), we are glad to help you!

PRODUCT INSTRUCTION

‘Thank you for choosing the EENOUR laser rangefinder U1000PRO, designed to deliver all of the precise distance measurement crucial to golfers.

SPECIFICATIONS

The maximum range i based on e meas.rement o ght-colred buidings. Wealher arget sizs, gy surface shape, etc. may affect the maximum amount of process. The accuracy s affected by the. = weather, whether the target reflection conditions are good, whether there is strong light interference and other factors. For details, refer to .

Features:

• Flag lock function;
• Vibration confirm:
• Objectiv lens: 18mm, wider field of view, and clearer screen;
• Speed measurement mode, which can capture the target speed in eal time;
• Built-in 650mAN chargeable Li-ion battery, with USB Type-C charging port;
• OLED Red/Green Display, features a clear and functional reticle with 4 brightness intensity levels ;
• Siope Mode, which automatically calculates adjusted distances due to elevation changes. «
• Horizontal and vertical distance, applied to engineering survey;
• Class 1 pulse laser causing no ha o eyes;
• Noiseless operation, Auto power of;

PACKING LIST

• Laser Rangefinder

• Magnetic Case

• User Manual

• USB Type-C cable

• Lens Cloth

RANGEFINDER DIAGRAM

(Only light up in no compensation mode, suit for the tournament)

LED DISPLAY

HOW TO USE

It will be tur off automatically after 105 when no operation is made.

DIOPTER ADJUSTMENT

*Adjust the sight according to right” and “lef” on the knob**
To focuslincrease clariy, use the Diopter Adjustment by turning the Eyepioce. (Turn towards”right” such 2s farsghtedness; Tum towards eft such as nearsightedness.)

SETUP MODES

Short press the button to select the mode.

1. Straight Line Distance Measurement: Measure the straight-lne distance from device to target
2. Flag Lock’Lock and measure the nearest target distance.
3. Slope Mode: Measure the: Compensating distance.
4. Horizontal and vertical Distance Measuroment Measure the horzontal and the rolaive verical distance from tre Gevicato trget
5. Speed Measurement: Measure the real time speed of the moving target.

BRIGHTNESS, UNIT AND VIBRATION SETUP

Long press the button [ l for 2s to set mode.

• Brightness setup
  Short press to select brightness level,
  ****Short press to choose the unit

• Unit Setup

•   Short press to select unit between M and Y,
  c Short press to set vibration.

• Vibration Setup

• Short press to switch on/off the vibration,
  ****Short press to save setting result

NOTE

1. Vibration on, the device vibrates once after each measurement, and twice when flag mode locked.
2. Vibration off, the device won’t vibrate after each measurement, and vibrate twice when flag mode locked.

OLED Brightness Adjustment

Long press [ ****, then short press to adjust the brightness level. The system has set 1~4 levels, and if you adjust the brightness level, it will be retained when tum on again.

STRAIGHT LINE DISTANCE MEASUREMENT

Measure the straight-line distance.
Singlo Measurement: ****Shortpress once Continuous Measurement Long press B to scan the cistance

• Please do the measurement over 3 meers.
• lease check If the lens is clean:
• Please confirm whether there is target overlap during measurement;

Flag Lock

Long press to aim at the target then scan left and right when measuring overlapping targets,then get the distance of the nearest target.

SLOPE MODE

Long press Ithen lign the flagpol toscan et and rgh, it support slope mode and flag ock at the  same timehen the siope adjusled istance, actua distance and verical dstance wil e shown on e disiay screen

VERTIC, ND HORIZONTAL DISTANCE MEASUREMENT

Single Measuremer it Press once ”
Continuous Measurement: Long Press to scan the th relative vertical distance and horzontal distance.

SPEED MEASUREMENT

Long press ****to measure the speec of a moving targetthe real ime speed would b shown on OLED sereen

OPERATIONAL NOTES

‘The mulifunctional range finder does not emitted a visible bea. It uses a nondestructive vision infrared pulse laser, and then from the selected target reflection, back to the optical receiver. By measuring each pulse from the target and back, the laser rangefinder then uses its advanced diagnostic circuit to instantly calculate the measured distance. The maximum measuring range of the device depends on the target reflectivty, colour, surface finish, size and actual shape.

Try to use the device in below environment to guarantee the accuracy:

• Sunny Day
• Bright Target
• Shiny Surface.
• Clear Air
• High Reflecting Surface

Below situation may cause measuring problems to the device:

• Black Target
• Snowy Rainy or Foggy Diffuse Surface
• Tiny Target
• Glass
• Dynaric Target
• Very Strong Light or Sunshine
• Charge the device when the icon ] shows to avoid bigger error under low power condition.
• DO NOT touch the lens by finger in order to protect the coating on lens.
• DO NOT disassemble the device which s calbrated by high precise instrument. Please send itto professional maintenance department when the device gets problems.
• DO NOT wipe the lens with anything other than lens cloth.
• DO NOT carry the device with collsion or weight
• DO NOT make the device in baking or corrosion environment.
• D0 NOT store the device under sunlight, dusty or temperature-abrupt environment it should be keptin a dry, cool and ventiated place.
• DO NOT operate the device aiming to the sun or strong light source, which may damage the photosensor.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>