umbro 871125247371 Smartwatch Activity Tracker with Body Temperature User Guide
- June 9, 2024
- umbro
Table of Contents
umbro 871125247371 Smartwatch Activity Tracker with Body Temperature
FEATURES
- 0.96-inch TFT one touch color screen display
- Multisport include Climbing, Cycling, Running, Walking
- Built-in HR sensor, monitor your heart rate
- Built-in high-precision body temperature sensor monitors your body temperature all day
- Monitor your daily activity and sleep
- Incoming call reminder
- Display SMS, emails, calendar events and social media activity
- Remote shutter
- IP67 waterproof
- Fully compatible with Android 5.0+ / iOS 10+
- Bluetooth version: BT5.0
- Body Temperature Sensor
- Li-ion Battery: 3.7V 90mAh
- Frequency: 2402-2480MHz
- RF Output Power: -0,91dBm
- Input: 5V 0,5A
INSTALL OPLAYER SMART LIFE APP ON PHONE
-
Download: Search for “Oplayer Smart Life” in the APP store or Google Play. Or scan the following QR code for the installation:
Android and IOS -
CHARGING FOR AUTOMATIC POWER-ON
-
Once a power charger is plugged in, the bracelet will be activated automatically.
-
Please charge the bracelet whenit has low battery.
NOTE: Please make sure your device has been charged for at least 10 minutes before initial use.
BIND THE DEVICE WITH MOBILE PHONE
- Enable Bluetooth on your smart phone.
- Open “Oplayer Smart Life” on your smart phone, set your profile at Settings.
- Tap “Connect device” on Settings and select bracelet connect.
- Follow the steps, search your device name and connect it.
UNBIND THE DEVICE
- Open “Oplayer Smart Life” on your smart phone.
- Tap “Disconnect device” on Settings.
- Forget your device on your smart phone Bluetooth settings.
OPERATION INTRODUCTION
- You can raise your hand / press the touch button to light up the screen.
- Press the touch button to switch to the main menu interface.
- Hold the touch button to achieve the function of “Confirmation”.
FUNCTIONS
INTERFACE DESIGNS
You can hold the touch button to change the clock design and press the touch button to select your favorite clock design.
PEDOMETER
The bracelet will record your daily activity automatically. Press touch button: switch between steps, calories and distance interface. After syncing with Oplayer Smart Life APP, you can check your activity data on your smart phone.
TEMPERATURE
Press the touch button and switch to the body temperature interface, hold the
touch button then temperature measuring starts, after 30s the temperature data
will be shown on the screen. The body temperature unit can be set by degrees
Fahrenheit (°F) or degrees Celsius (°C). To switch the degree unit setting:
Switch to “More” and hold the touch button to enter, select “Temperature
Unit”, then hold the touch button again.
After syncing with Oplayer Smart Life, you can check the temperature data on your smartphone.
HEART RATE
Start testing by switching to the heart rate interface with the touch button.
After syncing with Oplayer Smart Life, you can check your heart rate data on your smart phone.
MESSAGE
Press the touch button to switch to the message interface, then press the touch button to enter the view. This function includes: incoming calls, SMS, QQ and Wechat, Whatsapp, any message notification, etc.
MULTI-SPORT
Hold the touch button to enter more exercise functions. The bracelet has four multi-sports options: Walking, Running, Hiking and Cycling. You can choose the mode you need. While exercising, the bracelet will record the data of the exercises.
When you want to complete this exercise, you can press the touch button to
stop your movement and save it.
NOTE: If the exercise time is less than 1 minute, the data will not be
saved.
When you want to complete this exercise, you can press the touch button to
stop your movement and save it.
NOTE: If the exercise time is less than 1 minute, the data will not be
saved.
MORE
Hold the touch button to enter the functional interface. There is an “About” and “Shut Down” interface.
ABOUT
Hold the touch button, you can check your bracelet’s BT Mac address, device
name and firmware vision.
POWER OFF
Hold the touch button and you can turn off your bracelet.
FIND PHONE
After the bracelet is connected to Oplayer Smart Life application, the “Find
Phone” option will be on several submenus. Hold the touch button, your Android
phone will ring. If you use an iPhone, you must display your Oplayer Smart
Life display on the screen.
RESTORATION
Hold the touch button, the bracelet will return to the factory setting.
SKIN TEMPERATURE
Hold the touch button and you can switch between the “Skin Temperature”
function and the “Body Temperature” function.
SEDENTARY REMINDER
Set the start and end time, and sedentary time interval (minutes) on Oplayer
Smart Life, threshold value (steps), entering into repeat setting to choose
sedentary reminder date (weeks). When the sedentary time arrives, the bracelet
will light up the screen and vibrate.
WATER WARNING
Set the start and end time of a period and set the water interval on the
Oplayer Smart Life, (minutes, enter repeat settings to select a sedentary
reminder date (week / week). When the set time comes, the bracelet will shine
and vibrate.
ALARM
You can set five alarms on Oplayer Smart Life. When the alarm is ringing, its
icon will be animated and the bracelet will vibrate.
GESTURE CONTROL
You can set the gesture control style on Oplayer Smart Life to your
preferences.
- Raising hand: while raising your hand, the screen will be lighted up.
- Turning wrist: while turning your wrist, the screen will be lighted up.
The symbol above and on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The Waste of Electrical and Electronic Equipment (WEEE) Directive has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill. Contact local authorities for information on the correct disposal of Electrical or Electronic equipment.
A.I.&E. Adriaan Mulderweg 9-11 5657 EM Eindhoven, The Netherlands Edco UK Ltd,1st Floor Two Chamberlain Square, B3 3AX, Birmingham, UK