ColorKey CKU-5060 Orientation Mover Beam 100 User Manual

: September 26, 2024
: ColorKey

ColorKey CKU-5060 Orientation Mover Beam 100 User Manual

Please read these instructions carefully before use. Operating this fixture according to these instructions is important to avoid any possible damage or accidents caused by misuse.

Introduction

Package Contents

Mover Beam 100
Power Cord
Hanging Bracket
QR Guide

Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when moving or setting up the fixture.

Service & Support

Your ColorKey product includes a 2-year warranty. For technical support or to register your product, please visit https://www.colorkeyled.com/support/

You can also reach us by phone Monday thru Friday, 8:30am –5pm PST at 818-578-4030.

Product Overview

**Front

**

Moving Head
Yoke
Base
LED Display
Menu Guide Buttons
Microphone

**Back

**

DMX In
DMX Out
Power In
Fan

Mounting

Orientation
Mover Beam 100 may be mounted in any position; however, make sure there is adequate ventilation around the product.

Rigging

Before deciding on a location, make sure there is easy access to the product for maintenance and programming.
Make sure adequate ventilation is provided around the product.
Make sure that the structure or surface onto which you are mounting the product can support the products weight.
Mount the product securely to a rigging point, weather an elevated platform or a truss.
When rigging the product onto a truss, use a mounting clamp of the appropriate weight capacity.
When mounting the product on the floor, make sure that the product and cables are away from people.

Display Operation

MENU: Access the menu
UP: Scroll through menu selection or parameter increase
DOWN: Scroll through menu selection or parameter decrease
ENTER: Make Selection

Display	Value	Function
Addr	d001-d512	Set DMX Address
CHnd	13	Select 11 or 13 Chanel DMX Mode

Gobo and Color Channel Assignments

**Gobos

Color Selections

**

11 CH DMX values

Channel	Value	Function
1	0-255	Pan
2	0-255	Tilt
3	0-255	Pan/Tilt Speed
4	0-255	Dimming
5	0-255	Strobe
6	001-019	White
020-39	Color 1 – Red
040-059	Color 2 – Yellow
060-079	Color 3 – Blue
080-099	Color 4 – Green
100-119	Color 5 – Orange
120-139	Color 6 – Magenta
140-159	Color 7 – Cyan
160-207	CW Color Cycling Slow to Fast
208-255	CC Color Cycling Slow to Fast
7	001-009	Gobo 1 – Open
010-019	Gobo 2- Pill
020-029	Gobo 3 – Three Dot Line
030-039	Gobo 4 – Hex Star
040-049	Gobo 5 – Star
050-059	Gobo 6 – Flower
060-069	Gobo 7 – Cube Outline
070-079	Gobo 8 – Pinpoint Circle
080-089	Gobo 9 – Triangle Outline
090-099	Gobo 10 – Four Point Star
100-109	Gobo 11 – Four Dot Stack
110-119	Gobo 12 – Circle Outline
120-187	Counter Clockwise Rotation (Slow to Fast)
188-255	Clockwise Rotation (slow to fast)
8	0-99	Prism Motor Off
100-127	Prism Motor On
128-255	Prism Rotation (slow to fast)
9	0-126	No Function
127-255	Turn on Rainbow Prism
10	0-59	No Effect
60-159	Auto Mode
160-255	Sound Active Mode
11	0-249	No Function
250-255	Reset (5 Seconds)

13 CH DMX values

Channel	Value	Function
1	0-255	Pan
2	0-255	Pan Fine
3	0-255	Tilt
4	0-255	Tilt Fine
5	0-255	Pan/Tilt Speed
6	0-255	Dimming
7	0-255	Strobe
8	001-019	White
020-39	Color 1 – Red
040-059	Color 2 – Yellow
060-079	Color 3 – Blue
080-099	Color 4 – Green
100-119	Color 5 – Orange
120-139	Color 6 – Magenta
140-159	Color 7 – Cyan
160-207	CW Color Cycling Slow to Fast
208-255	CC Color Cycling Slow to Fast
9	001-009	Gobo 1 – Open
010-019	Gobo 2- Pill
020-029	Gobo 3 – Three Dot Line
030-039	Gobo 4 – Hex Star
040-049	Gobo 5 – Star
050-059	Gobo 6 – Flower
060-069	Gobo 7 – Cube Outline
070-079	Gobo 8 – Pinpoint Circle
080-089	Gobo 9 – Triangle Outline
090-099	Gobo 10 – Four Point Star
100-109	Gobo 11 – Four Dot Stack
110-119	Gobo 12 – Circle Outline
---	---	---
120-187	Counter Clockwise Rotation (Slow to Fast)
188-255	Clockwise Rotation (slow to fast)
10	0-99	Prism Motor Off
100-127	Prism Motor On
128-255	Prism Rotation (slow to fast)
11	0-126	No Function
127-255	Turn on Rainbow Prism
12	0-59	No Effect
60-159	Auto Mode
160-255	Sound Active Mode
13	0-249	No Function
250-255	Reset (5 Seconds)

Stand Alone Settings

To use your Mover Beam 100 without a DMX Controller, use one of the various standalone modes below.

*Please note, we do not recommend using products in standalone mode that are connected to a DMX string and controller. Standalone mode may transmit DMX signals that could interfere with DMX signals from the controller.

Automatic Programs

To run the Mover Beam 100 in Automatic Mode, follow the instructions below:

Press (Menu)
Use (Up or Down) to select Auto Program 1-4
Press (Enter) to return to menu

Sound Active Mode

To run the Mover Beam 100 in sound-active mode, do the following:

Press (Menu)
Use (Up or Down) to select Sound
Press (Enter) to return to menu

Sound Sensitivity

To set the Sound Active sensitivity on the Mover Beam 100, follow the instructions below:

Press (Menu)
Use (Up or Down) to select Sens
Use (Up or Down) to select Sound Sensitivity, low- high (01-99)
Press (Enter) to return to menu

Invert Pan

To set Pan orientation on the Mover Beam 100, follow the instructions below:

Press (Menu)
Use (Up or Down) to select IPan
Use (Up or Down) to turn the Pan orientation ON or OFF
Press (Enter) to return to menu

Invert Tilt

To set Tilt orientation on the Mover Beam 100, do the following:

Press (Menu)
Use (Up or Down) to select Invert Tilt
Use (Up or Down) to turn the Tilt orientation ON or OFF
Press (Enter) to return to menu

Screen Reverse

To set the display orientation on the Mover Beam 100, follow the instructions below:

Press (Menu)
Use (Up or Down) to select LED
Use (Up or Down) to select Screen Rot
Press (Enter) to return to menu

Maintenance

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light sources life and or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products regularly after extended use. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.

To clean the product, follow the instruction below:

Unplug the product from power.
Wait until the product is at room temperature.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or ISO.
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
Softly drag any dirt or grime to the outside of the transparent surface.
Gently polish the transparent surfaces until they are free of haze and lint.

Technical Information

100W white LED
Color wheel with 7 colors plus open
Gobo wheels : 12 metal gobos
0-100% linear dimmer
Pan : 540°/ Tilt: 180°
18-facet prism
6 color rainbow prism
DMX 11 &13 channel mode
Master/ Slave, Sound Active, Auto- Programs, DMX 512
DMX : 3-pin XLR In/Out
Power Consumption: 120W
Dimensions: 17″ x 13″ x 12″ (423 x 322 x 297 mm)
Weight: 15 lbs. (6.8 kg)

Please note: As we continue to work towards improving our products and your experience as a user, we recommend that you check our website periodically for updates to user manuals and specifications at www.ColorKeyLED.com or you may contact us directly at info@colorkeyled.com.