ColorKey CKU-3040 StageBar TRI 12 RGB LED Bar Lights User Manual
- June 5, 2024
- ColorKey
Table of Contents
ColorKey CKU-3040 StageBar TRI 12 RGB LED Bar Lights User Manual
Please read these instructions carefully before use. Operating this fixture according to these instructions is important to avoid any possible damage or accidents caused by misuse.
Introduction
Package Contents
- StageBar TRI 12
- IEC Power Cable
- IR Remote
- User Manual
Safety
Caution! Opening this unit voids warranty. Contact ColorKey for any
service requests.
Warning! To avoid electrical shock, be sure to disconnect power before
any service or when moving or setting up the fixture.
Caution! Avoid direct eye exposure with the fixture when on.
- This fixture is for indoor use only.
- This fixture must be installed a minimum distance of 5 meters (16’4”) away from any lighted objects.
- Do not install or operate this fixture near flammable materials.
- This device must be installed, operated, and maintained by a qualified professional.
- Please check if the voltage is in accordance with the rated power before installing.
- Do not operate this fixture if the power cord has been damaged. Turn off fixture and replace with a power cord of similar rating.
Service & Support
Your ColorKey product includes a 2-year warranty. For technical support or to
register your product, please visit https://www.colorkeyled.com/support/
You can also reach us by phone Monday thru Friday, 8:30am – 5pm PST at
818-578-4030.
Display Operation
MENU: Access the menu/Scroll through menu options
UP: Scroll through menu selection or increase parameter
DOWN: Scroll through menu selection or parameters decrease
ENTER: Open/Select the current menu option
Menu Guide
DMX Values
3 channels mode
5 channels mode
7 channels mode
36 channels mode
Infrared Remote (IR) Control
To use the IR remote, simply point the remote at the IR receiver on the
lighting fixture.
The IR receiver on the StageBar TRI 12 is located front panel with the LED
lenses.
*DMX512 data transmissions will override programs set by IR Control
-
Speed/ Value Controls
Use up (+) or down (-) controls to change values for dimmer, speed, and other capable programs. -
IR on/off
To begin using IR remote press (on). Pressing (off) will turn off your light. -
Color Select
Manual Color Mixing
To begin mixing colors, press the Red (R) , Green (G) , Blue (B) , (w) is nonactive, then press (+) or (-) to increase or decrease the brightness of each color. Continue with the next color until you achieve your desired color.
Color Presets
12 preset colors can be accessed from the IR Remote. Simply press to select a color. -
Auto Mode
In Auto mode, the light loops through various preprogrammed colors.
To turn on Auto mode, press the Flash button, then press (+) or (-) to increase or decrease the speed of the program -
Strobe
In Strobe mode, the light will begin to strobe when the button is pressed.
Use(+) or (-) to increase or decrease the speed of the program
-
Fade
In Fade mode, the light loops through various preprogrammed fades with colors.
To turn on Fade mode, press the Fade button, then press (+) or (-) to increase or decrease the speed of the program
-
Pulse
In Pulse mode, the light loops through various preprogrammed fades with colors.
To turn on Fade mode, press the Smooth button, then press (+) or (-) to increase or decrease the speed of the program
Setup & Connections
- Wired DMX Cable Connections
Use a DMX to cable to connect to the in/out sockets on the bottom of the light for use with a cabled connection for DMX 512 control.
Troubleshooting
Technical Information
- 12x3W RGB 3-in1 LEDS
- DMX Channel Modes: 3 / 5 / 7 / 36
- Control modes: DMX 512, Master /Slave, IR Remote, Sound to Dimmer, Stand Alone Programs
- 0-100% Dimmer
- Lamp rated life: >50000 Hours
- Working temperature: up to 40˚C
- Power connection: removable IEC
- Power consumption: 50W
- Power supply: AC110-240V;50-60Hz
Please note: As we continue to work towards improving our products and your experience as a user, we recommend that you check our website periodically for updates to user manuals and specifications at www.ColorKeyLED.com or you may contact us directly at info@colorkeyled.com.