ColorKey CKU-3100 PartyBar Pro 1000 All in One DJ Stage Lighting Effect Systems User Manual

ColorKey CKU-3100 PartyBar Pro 1000 All in One DJ Stage Lighting Effect

Systems

Specifications

• Model: CKU-3100

• Product Name: PartyBar PRO 1000

• LED Types: RGBWAP, White+UV, Warm White SMD, RGBW 4-in-1

• Features: Wireless DMX, Red & Green Laser, Wireless IR
  Receiver, Wireless Footswitch Antenna

• Power: Battery-operated

• Mounting: Can be mounted in any position with adequate ventilation

Product Usage Instructions

Stand Setup Instructions
To set up the PartyBar tripod stand:

1. Attach the extension pole by pressing the connection collar to the top of the tripod.
2. Insert the extension into the collar and push down until both poles are fully inserted.
3. Tighten the knob securely.
4. For safety, weigh down the base of the tripod with counterweights or sandbags when setting it to maximum height.

Unpacking & Repacking
When packing your PartyBar PRO 1000:

• Follow the instructions carefully to avoid damage during transport.
• Ensure proper mounting orientation for adequate ventilation.

Product Overview
The PartyBar PRO 1000 features various LEDs and components:

• RGBWAP LED Derby
• White+UV 2-in-1 LED
• Wireless DMX Antenna
• Warm White SMD LED Panel
• RGBW 4-in-1 LED Par
• Red & Green Laser
• Wireless IR Receiver
• Wireless Footswitch Antenna

Display Operation
The display allows you to navigate through different settings and options using the menu, up, down, and enter buttons.

Menu Guide
The menu options include various modes such as DMX, Static Colors, Auto, Sound, Speed Sensitivity, Dimming, and more for customization.

DMX Values
Refer to the user manual for detailed DMX values and addressing information.

FAQ

1. Q: Can I mount the PartyBar PRO 1000 in any position?
   A: Yes, you can mount the fixture in any position, but ensure proper ventilation around the product.

2. Q: How high can the stand lift the fixtures?
   A: With the extension pole installed, the stand can lift your fixtures over 7ft in the air. Remember to weigh down the base for stability.

Introduction

Package Contents

• PartyBar PRO 1000
• 7ft. Stand
• Power Cable
• IR Remote
• Antenna x2
• QR Manual
• Laser on/off keys
• Carrying Case
• Mounting Brackets

Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when moving or setting up the fixture.

Service & Support
Your ColorKey product includes a 2-year warranty. For technical support or to register your product, please visit https://www.colorkeyled.com/support/ You can also reach us by phone Monday thru Friday, 8:30am –5pm PST at 818-578-4030.

Stand Setup Instructions

PLEASE READ CAREFULLY BEFORE USING THE STAND TO AVOID DAMAGE AND INJURY
The PartyBar tripod stand includes a removable extension pole, which has the advantage of shrinking the footprint of the stand when disassembled, for ease of transportation. With the extension pole installed, the stand can lift your fixtures over 7ft in the air.

To use the extension pole, simply press the connection collar (B) to the top of the tripod (A), then insert the extension (C) into the collar. Push down until both poles are fully inserted into the collar and tighten the knob.
WARNING! In order to avoid accidents, it is highly recommended to weigh down the base of the tripod using counterweights or sandbags while the stand is set to maximum height. Failure to do so may result in the stand being tipped over accidentally, causing damage and bodily injury.

Unpacking & Repacking

Please read these instructions carefully before packing. Packing this fixture according to these instructions is important to avoid any possible damage or accidents during transport and storage.

When packing your PartyBar PRO 1000 please be sure that:

• The unit is placed face down with derby fixtures pointing in a downward direction
• You remove wireless and footswitch antenna
• You remove laser on/off key
• You remove mounting brackets
• The retainer strap does not hang out of case when closing the zipper

Mounting

Orientation
PartyBar PRO 1000 may be mounted in any position; however, make sure there is adequate ventilation around the product.

Rigging

• Before deciding on a location, make sure there is easy access to the product for maintenance and programming.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the products weight.
• Mount the product securely to a rigging point, weather an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of the appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cable to reach.

Product Overview

Front

1. Mounting Bracket
2. RGBWAP LED Derby
3. White+UV 2-in-1 LED
4. Wireless DMX Antenna
5. Warm White SMD LED Panel
6. RGBW 4-in1 LED Par
7. Red & Green Laser
8. Wireless IR Receiver
9. Wireless Footswitch Antenna

Back

1. Mounting Bracket
2. Safety Eye-bolt
3. Wireless Footswitch Antenna
4. T3A Fuse Socket
5. Locking Power In/Out
6. DMX In/Out
7. Laser On/Off Lock
8. Power On/Off
9. Battery Life Indicator
10. Menu
11. Microphone
12. Wireless DMX Antenna

Display Operation

Menu: Access the menu/Scroll through menu options
Up: Scroll through menu selection or increase selected parameter
Down: Scroll through menu selection or decrease a selected parameter
Enter: Open/Select the current or selected menu option

Menu Guide

18 CH
3CH
Static Colors| Stat| S 01-25| Static color selections
Auto| Auto| Au1-10| Auto programs
Sound| Soun| So1-10| Sound activated programs
Speed| SPEE| SP1-SP9| Speed select (slow to fast)
Sensitivity| SEnS| Se1-Se9| MIC sensitivity (low to high)
Dimming| dIMM| dI1-dI 9| Master dimming (low to high)
Silent Scene| SILE| on/oFF| Specific to (Sound) mode, Silent Scene will either keep the light on, or off when music stops playing
SMD| Smd| on/oFF| Enable or disable SMD LED panels
Slave| SLAV| Slave| Slave mode will mimic Master units by way of wired or wireless DMX connections. Select SLAV for this control, otherwise the unit is a Master
Wireless 2.4G| 24G| 1r| Red or Ch. 1 Wireless Connection
2G| Green, Ch. 2 Wireless Connection
3rG_| Yellow, Ch. 3 Wireless Connection
4 b| Blue, Ch. 4 Wireless Connection
5r_b| Magenta, Ch. 5 Wireless Connection
6_Gb| Cyan, Ch. 6 Wireless Connection
7rGb| White, Ch. 7 Wireless Connection
ECO PRO Power Saving| ECO| OFF| Regular operating mode at full brightness
ON| Energy saving mode, at a slightly reduced brightness to (White+UV 2-in-1 LEDs)
S-EC| Super energy saving mode at a significant reduction in brightness
Infrared| InFr| on/oFF| Enable or disable the IR remote
Foot| Foot| on/oFF| Enable or disable a Footswitch controller (sold separately)

DMX Values

3CH DMX values

18CH DMX values

CH5

| 0-9| No function|
10-255| Derby Strobe (Rate 0-100%)

**** CH6-7

| 0-9| No function
10-19| Red
20-29| Green
30-39| Blue
40-49| White
50-59| Amber
60-69| Pink
70-79| Red + Green + Pink
80-89| Red + Blue + Pink
| 90-99| Red + White + Pink| DERBY1-2
---|---|---|---
100-109| Red + Amber + Pink
110-119| Green + Blue + Pink
120-129| Green + White + Pink
130-139| Green + Amber + Pink
140-149| Blue + White + Pink
150-159| Blue + Amber + Pink
160-169| White + Amber + Pink
170-179| Red + Green +Blue
180-189| Red +Blue +White
190-199| Red +White +Amber
200-209| Red + Green +Amber
210-219| Red + Blue +Amber
220-229| Green +Blue +White
230-239| Green + White +Amber
240-249| Green + Blue +Amber
250-255| ALL LEDs ON
CH8| 0-9| No function
10-255| Derby Motor Speed (speed slow-fast)
CH9| 0-9| No function| Laser
10-59| Laser Red
60-109| Laser Green
110-159| Laser Red + Green
160-255| Laser R+G effect speed (low-high）
CH10| 0-9| No function
10-129| Clockwise motor rotation (speed low-fast)
130-255| Counterclockwise motor rotation (speed low-fast)
CH11| 10-255| BAR White LED Strobe (Rate 0-100%)| Bar white LED
**** CH12| 0-9| No function
10-19| BAR White LED ON
20-159| LED Chase
160-255| LED Chase running (slow to fast)
CH13| 10-255| BAR UV Strobe (Rate 0-100%)| Bar UV LED
**** CH14| 0-9| No function
10-19| BAR UV LED ON
20-159| LED Chase
160-255| LED Chase running (slow to fast)
CH15| 0-9| No function| SMD
---|---|---|---
10-255| SMD Strobe (Rate 0-100%)
CH16| 0-9| No function
10-19| SMD1 LED Panel
20-29| SMD2 LED Panel
30-255| SMD1+SMD2
**** CH17| 0-9| No function
10-19| Auto program 1
20-29| Auto program 2
30-39| Auto program 3
40-49| Auto program 4
50-59| Auto program 5
60-69| Auto program 6
70-79| Auto program 7
80-89| Auto program 8
90-99| Auto program 9
100-109| Auto program 10
110-119| Sound program1
120-129| Sound program2
130-139| Sound program3
140-149| Sound program4
150-159| Sound program5
160-169| Sound program6
170-179| Sound program7
180-189| Sound program8
190-199| Sound program9
200-255| Sound program10
CH18| 0-255| Auto and Sound Program 1-10 speed (From slow to fast)

34CH DMX values

Stand Alone Control Settings

To use your PartyBar PRO 1000 without a DMX Controller, use one of the various standalone modes below.

Static Color Programs
To run the PartyBar PRO 1000 in a Static color, do the following:

1. Press (Menu)
2. Use (Up) or (Down) to select Stat
3. Use (Up) or (Down) to select Color S 01- S 25
4. Press (Enter)

Automatic Programs
To run the PartyBar PRO 1000 in Automatic Mode, follow the instructions below:

1. Press (Menu)
2. Use (Up) or (Down) to select Auto
3. Use (Up) or (Down) to select show Au1-10
4. Press (Enter)

Sound Active Mode
To run the PartyBar PRO 1000 in Sound-Active mode, do the following:

1. Press (Menu)
2. Use (Up) or (Down) to select Soun
3. Press (Enter)
4. Use (Up) or (Down) to select So1-10
5. Press (Enter)

Sound Sensitivity
To set the Sound Active sensitivity on the PartyBar PRO 1000, follow the instructions below:

1. Press (Menu)
2. Use (Up) or (Down) to select SEnS
3. Press (Enter)
4. Use (Up) or (Down) to select sensitivity from Se1-Se9 (low to high)
5. Press (Enter)

Wired DMX Connections

Your unit will automatically be in Master mode unless menu option SLAV is selected from the onboard display. To connect a Master to a Slave, you will need to link the DMX (Out) of your Master unit to the DMX (In) of your Slave unit by a wired DMX connection.

Slave products:
To set Slave on the unit you wish to control from the Master, do the following:

1. Press (Menu)
2. Use (Up) or (Down)) to select SLAV
3. Press (Enter)

Using a DMX controller:

1. Power on your PartyBar PRO 1000
2. Connect to a DMX controller with a DMX cable plugged into the DMX (In) port of your PartyBar PRO 1000 unit.
3. The fixture will default to DMX address 001.
   • The DMX address can now be set as needed for programing.
4. Use (Up) or (Down) to select (Addr)
5. Press (Enter)
6. Use (Up) or (Down) to select operating Channel Mode, (3ch, 18Ch or 34Ch)
7. Press (Enter)
8. Use (Up) or (Down) to set DMX Address (d001-d512)
9. Press (Enter)

Wireless DMX Connections

Your PartyBar PRO 1000 unit can connect wirelessly to other units using 2.4G wireless DMX networks 1-7. It can act as the Master controller or be controlled as Slave, or by wireless DMX. To do so, follow the instructions below.

Wireless Network Overview:

Slave products:
To set your units as SLAV you wish to control from the Master, do the following:

1. Press (Menu)
2. Use (Up) or (Down) to select SLAV
3. Press (Enter)
4. Use (Up) or (Down) to select 2.4G
5. Press (Enter)
6. Use (Up) or (Down) to select wireless network 1-7 (this will correspond to Master)
7. Press (Enter)

Master products:
To select wireless network, do the following:

1. Press (Menu)
2. Use (Up) or (Down) to select 2.4G
3. Press (Enter)
4. Use (Up) or (Down) to select wireless 1-7
5. Press (Enter)
6. Use standalone programs, Included IR remote or Optional footswitch to control.

Connecting to a wireless DMX transmitter:
To connect to a wireless DMX controller or other wireless network for control, do the following:

1. Turn on your wireless DMX transmitter
2. Turn on your PartyBar PRO 1000
3. Press (Menu)
4. Use (Up) or (Down) to select 2.4G
5. Press (Enter)
6. Use (Up) or (Down) to select wireless 1-7
7. Press (Enter)
8. The fixture will default to DMX address 001.
   • The DMX address can now be set as needed for programing.
9. Use (Up) or (Down) to select (Addr)
10. Press (Enter)
11. Use (Up) or (Down) to select operating Channel Mode, (3ch, 18Ch or 34Ch)
12. Press (Enter)
13. Use (Up) or (Down) to set DMX Address (d001-d512)
14. Press (Enter)

IR Remote Overview

To use the IR remote, simply point the remote at the IR receiver on the lighting fixture while pressing your desired selection. The IR receiver on the PartyBar PRO 1000 is located on the front face of the unit.

• THE IR REMOTE WILL NOT WORK IF A DMX CABLE IS CONNECTED TO THE INPUT

BLACK OUT

1. Press BLACK OUT to clear the existing program mode- all lights will go off, Press BLACK OUT again to return to the last program mode.

AUTO

1. Press AUTO on the IRC.
2. Press (+) or (–) to cycle between the different AUTO programs.

SOUND

1. Press SOUND on the IRC.
2. Press (+) or (–) to choose between the different SOUND programs.

STROBE

1. Press STROBE on the IRC.
2. Press (+) or (–) to adjust the strobe rate.
3. Press STROBE again to turn off the strobe.

SPEED

1. Press SPEED on the IRC.
2. Press (+) or (–) to adjust the auto/sound program speed.

SENSITIVITY

1. Press SENSITIVITY on the IRC.
2. Press (+) or (–) to adjust the microphone sensitivity value on the light.

DMX / %

1. Press to enable DMX or disconnect DMX on the product
2. Disconnecting DMX will set your fixture to last enabled program mode.

Manual

1. Press MANUAL on the IRC.
2. Press (R)ed, (G)reen, (B)lue, (W)hite, (A)mber and (UV/P) to choose your color setting.
3. Press (+) or (–) to cycle between static colors.

FADE / UNIT

1. Press Fade / Unit on the IRC.
2. Press (+) or (–) to cycle between the different FADE programs.

Numbers 0-9

1. Press from number (0) to (9) to change the brightness intensity (0 is low to 9 high).

Wireless Footswitch (Sold Separately)

Using the Optional Footswitch

• Ensure your PartyBar Footswitch Controller is powered on by engaging the power switch on the back of the unit and that the wireless antennae is securely connected.
• Ensure the wireless antennae is also connected on the back of your PartyBar PRO 1000 unit.
• Operate by pressing Auto, Sound Active, Color selections and Blackout.
• When Blackout is pressed, the active program will discontinue. An additional press is needed to reengage the lighting fixture and enable the last program.

Enable the Footswitch Controller within the Menu:

1. Press (Menu)
2. Use (Up) or (Down) to select Foot
3. Press (Enter)
4. Use (Up) or (Down) to select On or Off
5. Press (Enter)

Battery Life and Specifications

PartyBar PRO 1000 features an emergency battery that can last up to 30 minuets to support you in case of accidental disconnection or venue power failure. The battery will be engaged as soon as the power is switched to ON and disconnected from a power source. The battery charges whenever the included power cable is connected and plugged into a power source. If the product is plugged in and not in operation, make sure the product is turned off. Battery life can be viewed on the rear of your unit above the LED Menu.

About ECO PRO PowerSaving
You can access Power Saving settings in the onboard LED menu.

• (OFF) Regular operating mode at full brightness
• (ON) Energy saving mode, at a slightly reduced brightness
• (S-EC) Super energy saving mode at a significant reduction in brightness
• Power usage still varies dependent on the complexity of the programs used.

About LED Indicators and Battery Life
You can view Battery Life remaining from LEDs above the onboard menu.

Battery specification:

• Maximum working hours: 0.5hours (dependent on the ECO setting and programs you choose. Robust programs using frequent color changes will more quickly drain the battery charge.)
• Battery charge time: 1.5hours
• Battery lifetime: average lifetime is 500 charges
• Battery Type: Fixed Lithium Battery
• Battery Voltage: 11.1 VDC
• Battery Capacity: 1200 mAH

Maintenance

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light sources life and or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products regularly after extended use. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.

To clean the product, follow the instruction below:

1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or Isopropyl Alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.

Troubleshooting

a proper and working DMX cable.
No Laser Output| Make sure the Laser Key is turned to ON
No Wireless Connections are Made| Please follow instructions for wireless connections

Technical Information

• Derby LED: (2) 6 x 3W R/G/B/W/A/P
• Par LED: (2) 7 x 8W RGBW 4-in-1
• Bar LED: (4) 2W White-UV 2-in-1
• Panel LED: (2) 136 x 0.2W Warm white SMD
• Laser: Red and Green
• Control Modes: DMX512, Master-Slave, Auto, Sound, IR Remote, Wi-DMX Footswitch (Optional)
• 0-100% linear dimmer
• Flash rate: 0-20Hz
• DMX Channel Modes: 3 / 18 / 34 channels
• DMX: 3-pin XLR In/Out
• Includes mounting brackets
• Power Input Type: PowerCon In + Out
• Power consumption: 110W
• Power supply: AC100～240V 50/60Hz
• Fuse: T3A
• Dimensions: 40. x 6n. x 18in.
• Weight: 21 lbs

Please note: As we continue to work towards improving our products and your experience as a user, we recommend that you check our website periodically for updates to user manuals and specifications at www.ColorKeyLED.com or you may contact us directly at info@colorkeyled.com.

References

• Home - ColorKey
• Home - ColorKey
• Support - ColorKey

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>