Jumbo 1141692 Aluminium Scooter Instruction Manual

ALUMINIUM SCOOTER

INSTRUCTIONS FOR USE

To adjust the stem, release the quick lock and press the spring button, then adjust the handlebar at 3 height levels properly. The button must then pop into the fixation hole. Tighten the quick lock to secure the handlebar. After use, simply loosen the quick lock, press the spring button and push down the handlebar. Tighten the quick lock to secure the handlebar.

To fit grips, insert handle bars into the T-bar and make sure that the spring button pops out to secure in position properly.

Alignment screw
The screw must not be taken out.
If you lose this screw, do not use until the screw has been replaced.

1. To unfold scooter, release the quick lock.

2. Pull the plastic lever upwards to unlock the system.

3. When the scooter is completely unfolded, release the plastic lever to lock the system, lock the quick lock, then turn the screw clockwise until it is tight enough to close the buckle.

4. Warning! When folding the scooter, ensure that the front wheel is aligned to the scooterbody. If it is not done, it will not close properly. Keep fingers away from all moveable parts of the scooter as fingers could get trapped.

Never allow the user to put any part of the scooter in their mouth or to attempt to put any part of his or her body, or any plaything into the moveable or moving parts of the scooter. The rider should be instructed accordingly.

• Remove any sharp edges while using the scooter.
• Brakes will get hot from continuous use. Do not touch after braking.
• Please ensure that you carefully read all instructions contained in this booklet.

CLEANING

Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive. It is recommended to clean and dry the scooter after each use. Store it in its original carton when not in use. Keep it away from any corrosive materials.

WASTE DISPOSAL:

Dispose the scooter through a private or state recycling agency. Please be aware of the updated official directives. Please contact the recycling agency in case of doubt.
MAINTENANCE headset bush
Frequent inspections should be carried out to ensure that nuts, bolts and fixings are secure and that no parts are worn or damaged.

• Always inspect scooter prior to riding, especially the self-locking nuts and other self-locking fixings.
• Periodically check for undue wear to the wheels and braking mechanism.
• Please replace wheels if applicable
• It is most important to replace worn or damaged handlebar grips.
• Periodically and sparingly lubricate moving parts with a light oil front axle, rear axle and bushes.
• Do not make any modification other than mentioned in this instruction.

SAFETY WARNINGS

Please read below instruction before using the scooter.

• Adult assembly required. Adults must assist children in the initial adjustment procedures to unfold scooter, adjust handlebar and steering height and finally to fold scooter.
• This scooter is not a toy and it must be used under the direct supervision of an adult.
• Not suitable for children under the age of 36 months due to small parts and balls, which could be swallowed or inhaled by young children. To be assembled by an adult.
• Never allow more than one child to use the scooter at one time.
• Max user weight: 50kg.
• Always inspect the scooter before use. Check and secure all fasteners before every ride. Replace worn and broken parts immediately. Watch regular for wheels and brakes worn out and grease the wheel once a year.
• Always wear safety equipment such as helmet, kneepads and elbow pads.
• Always wear appropriate shoes.
• Direct Adult supervision required. The scooter should be used with caution, as it requires great skill, so as to avoid falling or collision with third parties. Make sure the child is comfortably positioned on the fully assembled and checked scooter. Demonstrate the steering to the child until they have mastered the function and operation of the handlebars and steering assembly. Demonstrate how to safely stop the scooter. The time necessary for a child to master and then co-ordinate each operation can vary considerably. Only when the child has reached a stage where it is able to balance the scooter, should the child be allowed to use the scooter unassisted, though not unsupervised. Please beware of the potential dangers of using the scooter on public roads.
• The scooter should not be used on hills, steep slopes, roads and where vehicles or animals may have access or be present. Obey all local traffic and scooter riding laws and regulations. Watch out for pedestrians.
• Ride on smooth paved surfaces away from motor vehicles.
• Avoid sharp bumps, drainage grates and sudden surface changes. Scooter may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves and other debris.
• When used in and around a dwelling the scooter should be kept away from hazardous areas such as kitchens, stairs, patio windows etc.
• Wet weather impairs traction, braking and visibility.
• Don’t ride at night or during poor visibility.
• Avoid excessive speed associated with downhill rides.
• Do not make acrobatic performances and use always both hands. It is most important that the rider always looks in the direction the scooter is travelling and takes care to avoid other children or unforeseen obstructions.
• Do not use it after consuming any alcohol or drugs.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>