MEAN WELL GSM25E Series 25W AC-DC Reliable Green Medical Adaptor Owner’s Manual
- September 26, 2024
- MEAN WELL
Table of Contents
MEAN WELL GSM25E Series 25W AC-DC Reliable Green Medical Adaptor
Features
- 2 pole EURO plug, Class Il power unit
- Medical safety approved (2 x MOPP) according to EN60601-1/-1-11
- Extremely low leakage current
- No load power consumption<0.1W
- Energy efficiency Level VI and meet CoC version 5 (except 5~9V for Level V)
- -25~+60°C wide range working temperature
- Protections: Short circuit / Overload / Over voltage
- LED indicator for power on
- Various DC plus quick adapter accessories available (Plug kit sold sperately, please refer to: https://www.meanwell.com/upload/pdf/DC_plug.pdf)
- 3 years warranty
Applications
- Blood glucose meter
- Blood pressure meter
- Nebulizer
- Inhaler
- Portable medical device
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
Description
GSM25E is a highly reliable, 25W wall-mounted style single-output green medical adaptor series. This product is equipped with a 2-pin (no FG) standard European power plug, adopting the input range from 80VAC to 264VAC. The entire series supplies different output voltages between 5VDC and 48VDC that can satisfy the demands for various kinds of miniature medical devices. The circuitry design meets international medical standards (2 x MOPP), has an ultra-low leakage current (<50MA), and fits the medical devices in direct electrical contact with the patients.
With an efficiency of up to 88% and an extremely low no-load power consumption below 0.1 W, GSM25E is compliant with EU ErP and meets Code of Conduct(CoC) Version 5; the supreme feature allows the adaptor to save energy when it is either under the operating mode or the standby mode. The entire series utilizes the 94V-0 flame retardant plastic case, providing the double insulation that effectively prevents electrical shock. GSM25E is approved with international medical safety certificates.
Model Encoding
SPECIFICATION
NOTE
- All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient.
- DC voltage: The output voltage set at the point measured by the plug terminal & 50% load.
- Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1 * F & 47 y F capacitor.
- Tolerance: includes set up tolerance, line regulation, and load regulation.
- Line regulation is measured from the low line to the high line at the rated load.
- Length of set up time is measured at the first cold start. Turning ON/OFF the power supply may lead to an increase in the set-up time.
- Derating may be needed under low input voltage. Please check the derating curve for more details.
- The power supply is considered an independent unit, but the final equipment still needs to confirm that the whole system complies with the
- EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
Derating Curve
Static Characteristics
Mechanical Specification
DC output plug
Standard plug: P1J
DC plug changeable through
- Customization of the standard part with an optional DC plug according to the table (MOQ applicable)
- Quick adapter accessory (sold separately without MOQ)
Please refer to below table and online selection guidebelow: https://www.meanwell.com/upload/pdf/DC_plug.pdf
Example quick adapter accessory
Optional DC plug: (Available in customized cable or quick adapter)
Installation Manual
Please refer to: http://www.meanwell.com/manual.html