SEACHOICE 19463 Livewell Pump Instruction Manual
- September 11, 2024
- SEACHOICE
Table of Contents
SEACHOICE 19463 Livewell Pump
Product Information
Specifications
- Model: LIVEWELL PUMP MANUAL 19463
- Dimensions: 69.0mm x 46.0mm x 26.0mm
- Thread Sizes: 1/2-14 NPT, 3/4-14 NPSM
- Power: 12V DC
Product Usage Instructions
User Safety
Before using the product, ensure you adhere to the following safety
guidelines:
- Keep the work area clean at all times.
- Avoid gas and vapor risks in the work area.
- Be cautious of electrical dangers to prevent electric shock or arc flash hazards.
- Always be aware of the risks of drowning, electrical accidents, and burn injuries.
Rotation Function
The pump body has a rotation function which aids in its operation. Refer to
the manual for detailed instructions on utilizing this feature.
Accessories
The product comes with standard fittings and optional angle fittings for
installation. Ensure to use the appropriate fittings based on your setup
requirements.
Wiring Diagram – Typical Installation
Follow the wiring diagram for a typical installation. Connect the brown wire to the positive pole and the black wire to the negative pole of a 12V DC power source.
Installation – Side Mounting:
For side mounting installation, follow the steps outlined in the manual to
securely mount the pump in the desired location.
FAQ (Frequently Asked Questions)
-
Q: What should I do if the pump is not working?
A: Check the power source, wiring connections, and ensure the pump is free from any blockages. Refer to troubleshooting section in the manual for further guidance -
Q: Can this pump be used for continuous operation?
A: The pump is designed for intermittent use. Avoid continuous operation to prevent overheating and damage to the unit.
Purpose of this manual
The purpose of this manual is to provide necessary information for product
installation, operation and maintenance.
CAUTION: Read this manual carefully before installing, using or servicing this product. Failure to follow the instructions within this manual could result in explosion, property damage, severe personal injury and/or death.
User safety
General safety rules. These are safety rules that apply:
- Always keep work area clean
- Pay attention to the risks presented by gas and vapors in the work area
- Avoid all electrical dangers. Pay attention to the risks of electric shock or arc flash hazards
- Always bear in mind the risk of drowning, electrical accidents and burn injuries
Explanation
- The fittings are designed as a split quick connect joint, which adopts the split design of lock nut. This solution can quickly disassemble and replace the fitting without dismantling the water pipe which can meet the needs of most users. The lock nut is universal.1-1/8”29mm 90º fitting sold separately with 360° rotation function to meet any angle requirement.
- Pump Body 360° rotation function only available for 19463