TAKSTAR E10 Voice Amplifier User Manual

: September 26, 2024
: TAKSTAR

Table of Contents

TAKSTAR E10 Voice Amplifier
Preface
Features
Package Contents
Specifications
Function Descriptions
Operating Instructions
Safety Instructions
FAQs
CONTACT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TAKSTAR E10 Voice Amplifier

Preface

Dear Customer,

Thank you for purchasing the Takstar E10 Voice Amplifier. To better understand and use the product, please read this manual thoroughly.
If you have any questions or suggestions, please contact our local sales outlet.

Features

Sleek, unique, modern, and lightweight design.
10W peak audio output with rare-earth speaker.
Digital amplification for high-fidelity, noise-free sound.
Wireless connectivity for portable playback.
USB port for MP3 and audio file playback.
Status indicator light for real-time status updates.
MCU-controlled safe charging with overcharge protection.
Built-in 2500mAh lithium-ion battery for extended use.

Applications

Teaching, tour guiding, training, and promotions.

Package Contents

1 × Voice Amplifier
1 × Headset Microphone
1 × Type-C Charging Cable
1 × Shoulder Strap
1 × User Manual

Specifications

Voice Amplifier
- Frequency Response: 80Hz-12kHz
- Rated Power: 5W
- Peak Power: 10W
- Speaker Impedance: 4Ω
- Operating Voltage: DC 3.7V-4.2V
- Battery Spec: 18650 3.7V=2500mA
- Charging Spec: 5V=1A
- Charging Port: USB-C
- Charging Time: Approx. 2.5h
- Battery Life: Approx. 23h
- Wireless Connection: V5.3
- Dimensions: 105mm×100mm×36mm
- Weight: Approx. 170g
Headset Microphone
- Transducer: Back Electret Condenser
- Polar Pattern: Unidirec tio nal
- Frequency Response: 60Hz-16kHz
- Sensitivity: – 50 dB ±3dB (0dB=1V/Pa, at 1kH z)

Note: The above data are measured by Takstar laboratory which has the final interpretation right!

Function Descriptions

Power Switch: Slide the knob to turn the amplifier on (“ON” position) or off (“OFF” position). Adjust the knob towards “ON” to increase the volume and towards “OFF” to decrease the volume.
Indicator Light: The indicator light shows different states: Solid blue when fully charged. Flashing red and blue if low battery. Solid red while charging. Flashing rapid blue during wireless pairing search, and slow flashing blue if successful paired.
“M” Mode Switch Button: Press this button to switch between different operating modes. Voice prompts will accompany the mode changes. (Long-press this button when a USB drive and mic are inserted to enter recording mode. Long-press again to exit recording mode and automatically play back the recorded content.)
USB Port: Insert a USB drive with MP3 or WAV audio files to play them back. Avoid using other file types to prevent recognition issues or potential device damage.
MIC Jack: Insert a Ø3.5mm wired mic for voice amplification.
USB-C Charging Port: Connect the amplifier to a power adapter using the USB-C charging cable for charging.

Operating Instructions

Usage Instructions

Wear the wired headset mic properly and adjust the pickup angle. Insert the Ø3.5mm mic plug into the MIC jack of the amplifier.
Turn on the power switch of the amplifier. The blue power indicator light will illuminate. Use the volume control knob to adjust the desired volume level.
- Tip: For optimal performance, fully charge the battery before first-time use. If the device is not used for an extended period, charge the amplifier every 6 months to prevent over-discharging and maintain battery performance.

Wireless Playback Pairing
To pair and connect the device with your phone or other wireless playback device, follow these steps:

Turn on the power switch of the amplifier. Press the “M” button to switch to the wireless playback mode. The indicator light will rapidly flash blue, indicating it is in search and pairing mode.
On your phone, access the “Settings” menu and enable the wireless playback function. Search for “TAKSTAR E10” and connect to it. A voice prompt will confirm the successful wireless playback connection.
Next time you power on the device and select the wireless playback mode, if it has been previously paired, it will automatically reconnect to the last used playback device.

Safety Instructions

To avoid electric shock, overheating, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:

Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume levels for extended time to avoid product malfunction.
If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local after-sales service for repair.
Power adapter used, if any, should be approved by CCC certification or similar standards and comply with the power supply requirements.
Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or blocking any ventilation openings, to prevent malfunction.
The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent falling.
Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local after-sales service.

Label Meanings

This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law.
This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE).
Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE.
At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources.
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

About This Manual

This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products.
Also, specifications, devices, or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet.
For the latest version/more information, please visit our website: https://www.takstar.com/
Copyright ©2024 TAKSTAR. TAKSTAR and their respective logos are registered trademarks or trademarks of Guangdong Takstar Electronic Co., Ltd. in the PRC, and/or other countries.
All other trademarks are the property of their respective owners.
Scan for more product information

FAQs

Q: What are the applications of the E10 Voice Amplifier?
- A: The E10 Voice Amplifier is suitable for teaching, tour guiding, training, and promotions.
Q: How do I turn on the E10 Voice Amplifier?
- A: Slide the power switch knob to the ON position to turn on the amplifier.
Q: Where can I find more product information?
- A: For more product information, visit Takstar’s official website at www.takstar.com.