PetMedics 2P4S0005 Calming Sound Smoothing Machine User Guide
- June 3, 2024
- PetMedics
Table of Contents
PetMedics 2P4S0005 Calming Sound Smoothing Machine
What in the box
SET UP
![SET UP
Connect the included AC wall power supply cable into the sound
machines USB port and the other end to an available wall plug
-
Power Button " Press to power machine ON and OOFF
-
Mode Button When using the sound soother for the first time its default
setting is auto noise detection mode.
This means that when the machine detects noise 70dB or louder it will
automatically play one of the three soothing sounds for 1-Hour and
stop until a loud noise is detected again.
To put the machine into continuous play mode, press the M button and
listen for he long ascending tone.
This means soothing sound will play on a continuous loop until music
is paused or unit is powered off.
To put the machine back into auto noise detection mode press the M
button again and listen for the shorter ascending tone.
IMPORTANT: In this mode music will only play when a loud
noise is detected.
- Play and Pause Button The machine includes 3 built-in soothing sounds.
Press the play button once and the machine will play one of three
built-in soothing sounds.
Press this button again to pause the soothing sound.
4.Track Forward and Volume Increase Button
Press the button once to play the next soothing sound.
Press and hold this button to increase the volume.
- Back Track and Volume decrease Button Press this button once to go back to the previous track.
PetMedics-2P4S0005 -Sound-Smoothing-fig-2](https://manuals.plus/wp- content/uploads/2022/11/PetMedics-2P4S0005-Sound-Smoothing-fig-2.png)
Connect the included AC wall power supply cable into the sound machines USB port and the other end to an available wall plug
- Power Button
- Press to power machine ON and OOFF
- Mode Button
- When using the sound soother for the first time its default setting is auto noise detection mode. This means that when the machine detects noise 70dB or louder it will automatically play one of the three soothing sounds for 1-Hour and stop until a loud noise is detected again. To put the machine into continuous play mode, press the M button and listen for he long ascending tone. This means soothing sound will play on a continuous loop until music is paused or unit is powered off. To put the machine back into auto noise detection mode press the M button again and listen for the shorter ascending tone.
- IMPORTANT: In this mode music will only play when a loud noise is detected.
- Play and Pause Button
- The machine includes 3 built-in soothing sounds.
- Press the play button once and the machine will play one of three built-in soothing sounds.
- Press this button again to pause the soothing sound.
- Track Forward and Volume Increase Button
- Press the button once to play the next soothing sound.
- Press and hold this button to increase the volume.
- BackTrack and Volume decrease Button
- Press this button once to go back to the previous track.
- Press and hold this button to lower the volume.
CAUTION
- A dog’s hearing is up to 20x more sensitive than a humans. The sound machine’s default volume level is set at 70dB. Avoid increasing the volume unnecessarily to avoid potentially damage your dog’s hearing
- When setting up the machine please ensure it’s on a flat surface and the soother and AC power supPly is at least Sft away from your dog. Always keep the sound soother out of your dogs reach.
- This Product is designed for indoor use only.
FCC STATEMENT
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part I5 of the FCC Rules, operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part I5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. IC Statement
WARNING/DISPOSAL OF UNIT
Do NOT open and attempt to repair this product Doing so will void the warranty and could cause injury and damage to your device. lo dispose of the unit, follow the instructions below:
- Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
- Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
- Many electronics retailers now recycle batteries and other electronic components at no charge.
For Product and Warranty Information visit: www.MyPetMedics.comor
E-Mail: Support@mypetmedics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>