ROUGH COUNTRY 921811924 Side Window Deflectors In Channel Rain Guard Installation Guide

September 25, 2024
Rough Country

921811924 Side Window Deflectors In Channel Rain Guard

“`html

Product Information

Specifications:

  • Product Name: GM Side Window Deflectors
  • Compatibility: GM 2019-2024 (1500) / 2020-2024 (2500)
  • Kit Contents: 4 – Alcohol Pad, Front Driver Deflector, Front
    Passenger Deflector, Rear Driver Deflector, Rear Passenger
    Deflector

Product Usage Instructions

Installation Instructions:

  1. Roll the windows of the vehicle down.

  2. Use the supplied alcohol pad to clean the window channel. Refer
    to Photo 1 and Photo 2 for guidance.

  3. Remove about 2 inches of the red adhesive backer on the front
    passenger deflector on both ends. See Photo 3.

  4. Position the deflector in the desired location inside the
    window channel, leaving the free ends of the red adhesive backer
    hanging. Refer to Photo 4.

  5. Pull the free ends loose to fully expose the adhesive of the
    deflector. Apply pressure to ensure proper seating.

  6. Slowly raise the front passenger window and adjust the
    deflector or door glass as needed to fully raise the window.

  7. Repeat the above steps for other deflectors. For rear
    deflectors, ensure the notch shown in Photo 5 is positioned towards
    the rear of the vehicle.

  8. Leave windows rolled up for 72 hours to ensure proper
    adhesion.

Photo Reference:

Clean window channel.

Clean window channel.

Partially remove adhesive backer.

Position deflector in window channel.

Notch to rear of vehicle.

Frequently Asked Questions (FAQ)

Q: How long should I leave the windows rolled up after

installation?

A: It is recommended to leave the windows rolled up for 72 hours
after installing the deflectors to ensure proper adhesion.

“`

921811924
GM 2019-2024 (1500) / 2020-2024 (2500) SIDE WINDOW DEFLECTORS
Thank you for choosing Rough Country for all your vehicle needs. Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go. If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Check to ensure for adequate clearance between all components. Periodically check all hardware for tightness.
KIT CONTENTS: 4 – Alcohol Pad Front Driver Deflector Front Passenger Deflector Rear Driver Deflector Rear Passenger Deflector

Torque Specs:

Size 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″
3/4″

Grade 5 15 ft/lbs 30 ft/lbs 45 ft/lbs 65 ft/lbs 95 ft/lbs 135ft/lbs
185ft/lbs

Grade 8 20ft/lbs 35ft/lbs 60ft/lbs 90ft/lbs
130ft/lbs 175ft/lbs
280ft/lbs

Size 6MM 8MM 10MM 12MM 14MM 16MM
18MM

Class 8.8 5ft/lbs
18ft/lbs 32ft/lbs 55ft/lbs 85ft/lbs 130ft/lbs
170ft/lbs

Class 10.9 9ft/lbs
23ft/lbs 45ft/lbs 75ft/lbs 120ft/lbs 165ft/lbs
240ft/lbs

INSTALLATION INSTRUCTONS 1. Roll the windows of the vehicle down. NOTE: Installation will be shown on front passenger side. 2. Use supplied alcohol pad to clean the window channel. See Photo 1 and Photo 2.
Photo 1

Photo 2

Clean window channel.

Clean window channel.

3. Remove about 2″ of the red adhesive backer on the front passenger deflector on both ends. See Photo 3. 4. Position the deflector in desired location inside the window channel leaving the free ends of the red adhesive backer
hang. See Photo 4.

Photo 3

Photo 4

Partially remove adhesive backer.

Position deflector in window channel.

5. Pull the free ends loose to fully expose the adhesive of the deflector. Manually apply pressure to the visor to make sure it is seated properly.
6. Slowly raise the front passenger window and adjust the deflector or door glass as needed to fully raise the window. NOTE: It may be necessary to use your hands , while raising the window, to assist the initial position of the deflectors.
7. Repeat for other deflectors. NOTE: For the rear deflectors, the notch shown in Photo 5 goes to the rear of the vehicle.
8. LEAVE WINDOWS ROLLED UP FOR 72 HOURS TO ENSURE PROPER ADHESION.
Photo 5

Notch to rear of vehicle.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Rough Country User Manuals

Related Manuals