D-Link DWA-192 Wireless Dual Band USB 3.0 Adapter Installation Guide
- September 27, 2024
- D-Link
Table of Contents
D-Link DWA-192 Wireless Dual Band USB 3.0 Adapter
Specifications:
-
Product Name: Wireless AC1900 Dual Band USB 3.0 Adapter –
DWA-192 -
Wireless Standard: AC1900
-
Interface: USB 3.0
-
Technology: MU-MIMO
Product Usage Instructions:
Installation:
- Download the required driver from the DWA-192 description page on www.dlink.com.
- Insert the DWA-192 into any available USB port on your powered-on PC. Use the included USB 3.0 cradle with cable if needed.
- If the Driver Software Installation dialog box appears, press Cancel/Close.
- Open the folder with the required driver and run setup.exe to install the driver.
FAQ:
What should I do if I’ve forgotten my wireless encryption key?
The wireless encryption key is configured at the Wireless Access Point or Router. If you have forgotten it, the only solution is to reconfigure your Access Point/Router to use a new encryption key. Contact your Wireless Access Point/Router manufacturer for assistance.
What should I do if the LED on the DWA-192 does not come on after software installation?
- Check that your internet is working fine on existing computers.
- Ensure that you have followed and completed the software installation process. If not, please reinstall the software.
- The LED on the DWA-192 should illuminate after software installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>