D-Link DMC-560SC Single-Mode Fiber Media Converter Module Installation Guide
- October 30, 2023
- D-Link
Table of Contents
DMC-560SC
10/100BASE-TX Twisted Pair to 100BASE-FX
Single-mode fiber (60 km, SC)
Media Converter Module
Quick Installation Guide RECYCLABLE
INTRODUCTION
This Quick Installation Guide gives step-by-step instructions for setting up the D-Link Media Converter. The model you have purchased may appear slightly different from those shown in the illustrations. For more detailed information about the switch, its components, making network connections and technical specifications, please refer to the User Manual.
PACKAGE CONTENTS
These are the items included with your DMC-560SC purchase:
- DMC-560SC Media Converter
- Power Adapter
- User Manual
- Warranty Certificate
If any of the above items are damaged or missing, please contact your local
reseller for replacement.
Attention!
Using a power supply with a different voltage rating will damage and void
the warranty for this product.
CONNECTING TO POWER
- This Converter is a plug-and-play device.
- Connect the supplied AC to DC power adapter with a power voltage of 5Vdc/1Amp to the DC-Jack on the converter, and then attach the plug into a standard AC outlet with 220 V.
SLIDING SWITCH
There is a sliding switch for duplex mode setting for fiber port. Refer to the
table below for more details.
INSTALLING IN A CHASSIS
The Converter can be fit into any of the expansion slots on DMC-1000 chassis.
First, install the converter onto a carrier supplied with the chassis:
Step 1. Unscrew
and pull out the media converter board.
Step 2. Plug in the media board to any of the vacant slots.
Step 3. Fit the converter onto the carrier and use the screw to secure
it.
LED INDICATOR
The LED indicators give you instant feedback on status of the converter:
| LEDs | State | Indication |
|---|---|---|
| PWR (Power) | Lights on | Power on |
| Lights off | Power off | |
| 100 (100 Mbps) | Lights on | Runs at 100 Mbps on TX port |
| Lights off | Runs at 10 Mbps on TX port | |
| TX (TX Port) FX (FX Port) FDX/COL | Lights on (FDX) | Connection in full duplex |
mode FDX = Full Duplex
Lights off| Connection in half duplex mode
Lights Blinking (COL)| Data collision
TX (TX Port) FX (FX Port) LINK/ACT| Lights on (LINK)| Linking
Lights off| Not Linking
Lights Blinking (ACT)| Data transforming and receiving
ACT = Activity
D-Link: 8-800-700-5465
http://www.dlink.ru
e-mail:support@dlink.ru
Теl: +7 (4912) 575-305
Теl.: +7 (495) 744-00-99
e-mail:mail@dlink.ru
Версия 1.0 2019-08-17
Documents / Resources
|
D-Link DMC-560SC Single-Mode Fiber Media Converter
Module
[pdf] Installation Guide
DMC-560SC Single-Mode Fiber Media Converter Module, DMC-560SC, Single-Mode
Fiber Media Converter Module, Fiber Media Converter Module, Media Converter
Module, Converter Module, Module
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>