D-Link DWR-910M 4G LTE USB Mobile Router Owner’s Manual

D-Link DWR-910M 4G LTE USB Mobile Router

Product Information

Specifications :

• Model: DWR-910M
• Connectivity: 4G LTE
• Interface: USB
• SIM Card Slot: Micro SIM
• Wi-Fi: Yes
• Default IP Address: 192.168.0.1

Product Usage Instructions

Installation:

1. Slide in the direction indicated by the arrow to open the rear cover.
2. Insert the Micro SIM card into the card slot.
3. Close the rear cover securely.
4. Power on the device by plugging it into a computer, power bank, USB charger, etc.

Indicator Lights:

• Red flashing: MiFi starting up
• Flashing green: Identifying the SIM card
• Always on: Connected to the network and ready to use
• Blue and always on: Device connected to MiFi
• White: System upgrade in progress
• Red: SIM card identification issue

Connecting Devices:

1. Connect your laptop, smartphone, etc. to the MiFi via Wi-Fi.
2. Default Wi-Fi SSID name and password are printed on the device’s back.

Web Interface Setup:

1. Open a web browser on a connected device and enter 192.168.0.1 in the address bar.
2. Login with default admin username and password (both are ‘admin’).
3. If login fails, perform a hard reset to factory defaults.

Configuring Internet Settings:

1. Access the DWR-910M’s web-based management interface after login.
2. Check for WAN IP to confirm internet connection.
3. If SIM card is not detected, manually configure APN settings specific to your carrier.
4. Navigate to Internet tab > APN Settings, enter Name and APN, then click Apply.

Frequently Asked Questions (FAQ):

• Q: What should I do if the indicator light is red?
  A: A red indicator light may indicate issues with the SIM card. Ensure it is inserted correctly and not in arrears.

• Q: How do I reset the router to factory defaults?
  A: If you cannot log in using the default admin password, perform a hard reset to reset the device to factory settings.

• Q: Where can I find the correct APN information for my SIM carrier?
  A: The correct APN information should be provided by your SIM carrier. You can contact them for the specific details needed for configuration.

Technical Support Setup Procedure

How to install DWR-910M 4G LTE USB Mobile Router via web GUI

1. Slide in the direction indicated by the arrow and open the rear cover

2. Put the Micro SIM card into the card slot.

3. Close the rear cover again.

4. Power on your MIFI (such as plug into computers, power bank, USB charger, etc.)
   Indicator Lights:

5. When the indicator light is red flashing, it indicates that MiFi is starting up.

6. When the indicator light is flashing green, it indicates that MiFi is identifying the card.

7. When the indicator light is always on, it indicates that MiFi has been injected into the network and can be used normally.

8. When the indicator light is blue and always on, it indicates that there is a device connected to MiFi.

9. When the indicator light is white, it indicates that MiFi is upgrading the system.

10. When the indicator light is red, it indicates that MiFi can’t identify the card (for example: the SIM card used is in arrears or not inserted into the card, etc.)

11. Connect your laptop, smartphone, etc. via Wi-Fi. (The default Wi-Fi SSID name and Password are printed on the device’s back)

12. Open a web browser with the terminal connected to MIFI, login to the web interface 192.168.0.1, then press Enter.

13. By default, the admin username and password are both “admin.” Note: If you cannot log in using the default admin password, you will need to hard reset the router to factory defaults.

14. Once logged in, you should see the DWR-910M’s web-based management interface. The Device will receive a WAN IP, indicating the router is connected to the internet.

15. Once the SIM card is inserted, the router usually detects the connection immediately. If it does not identify the connection, you can manually configure it by adding APNs specific to your SIM carrier.

16. Go to the Internet tab at the top of the page, then navigate to APN Settings.

17. Enter Name and APN, then click the Apply button.
    Note: You will need to know the correct APN information (This information should be provided by your SIM carrier).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>