D-Link DSL-226 Wireless Modem Router User Manual

D-Link DSL-226 Wireless Modem Router

Specifications

• Product Name: Wireless N300 VDSL2/ADSL2+ Modem Router DSL-226
• Energy Related Product (ErP) with High Network Availability (HiNA)
• Network Standby Power Consumption: 4.92 watts
• Switched Off Power Consumption: 0.03 watts

Product Usage Instructions

Installation:

1. Before you Begin: Ensure all components are included in the package.
2. Wireless Installation Considerations: Position the router for optimal wireless coverage.
3. Manual Setup: Follow the manual instructions for setting up the router.

Getting Started:

To start using the DSL-226, follow these steps:

1. Setup Wizard: Use the setup wizard for guided configuration.

Connect and Share:

Share a USB storage device and connect with other devices:

1. Connecting from a Windows-Based PC: Follow the provided steps.
2. Connect and Share with DLNA Devices: Enable sharing with DLNA compatible devices.
3. Accessing from File Explorer on Windows: Access shared files through File Explorer.

Troubleshooting:

Refer to troubleshooting section in the manual for assistance with common issues.

Wireless Basics:

• What is Wireless? : Explanation of wireless technology.
• Tips: Useful tips for optimizing wireless performance.

Networking Basics:

• Check your IP address: Learn how to check your device’s IP address.
• Statically Assign an IP address: Guide on assigning a static IP address.
• Wireless Security – What is WPA? : Explanation of WPA security protocol.

FAQs

• Q: What should I do if any components are missing from the package?
  • A: Contact your reseller immediately to resolve the missing items issue.

“`

User Manual
Wireless N300 VDSL2/ADSL2+ Modem Router
DSL-226

Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.

Revision 1.00

Manual Revisions

Date Oct 05, 2023

Initial release

Description

Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. ChromeTM browser, Google PlayTM and AndroidTM are trademarks of Google Inc. NBNTM is a trademark of NBN Co Limited. Internet Explorer®, Edge®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2023 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.
ErP Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 4.92 watts Switched Off: 0.03 watts

D-Link DSL-226 User Manual

D-Link DSL-226 User Manual

iii

Section 1 –

Product Overview

PProacdkuacgteOCvoentrevnietsw

DSL-226 Wireless N300 VDSL2/ADSL2+ Modem Router Power Adapter Ethernet Cable Phone Cable

xDSL Microfilter/Splitter

Quick Install Guide & Wi-Fi Configuration Card

If any of the above items are missing, please contact your reseller.

Note: Using a power supply other than the one included with the DSL-226 may cause damage and void the warranty for this product.

D-Link DSL-226 User Manual

1

Section 1 – Product Overview

System Requirements

Network Requirements
Web-based Configuration Utility Requirements

· An active subscription with an Internet Service Provider using one of the following connection types: · A VDSL or an ADSL2+ connection to a telephone line using the DSL port Or · An activated existing broadband connection (e.g. NBNTM FTTP, NBNTM HFC) using the WAN port
· A computer with 802.11n/g/b wireless or Ethernet adapter
Computer with the following: · Windows®, Macintosh, or Linux-based operating system · An installed Ethernet adapter
Browser Requirements: · Internet Explorer 7 or higher · Safari 7 or higher · Firefox · Chrome · Microsoft Edge

D-Link DSL-226 User Manual

2

Section 1 – Product Overview

Introduction
The D-Link Wireless N300 VDSL2/ADSL2+ Modem Router is designed for high-speed, multi-WAN connectivity for smart home or small business Internet access. It combines both a VDSL2/ADSL2+ modem and high-end wireless router together to create a single, compact device that connects to the Internet, and shares that connection with all of your wired and wireless devices. Its multiple WAN connections with ADSL/VDSL and Ethernet WAN accommodate different connection scenarios and offers redundancy for fail-safe operation.

The device’s wireless N300 module provides high data throughput rate up to 300 Mbps utilizing the multiple-input and multiple-output (MIMO) technology. It offers concurrent Internet access with the required throughput and least interference, whether you are playing online games at home or conducting video conferences, HD multimedia streaming, or making Internet calls in an office setting. In addition to three 100 Mbps Ethernet LAN ports and one Ethernet LAN/WAN port, the router also features one USB port to support 4G LTE mobile network as well as file storage and sharing in your local network.

Some key features are described below:

· Supporting both VDSL2 and ADSL2+ The built-in DSL modem connects to ADSL2+ or VDSL2 broadband service available in your area.

· Compatible with 802.11 n/g/b Devices – The DSL-226 is compatible with the 802.11n, 802.11g, and 802.11b standards, so it can connect with wireless devices operating in this wireless standards.

· Advanced Features – The web-based configuration displays a number of advanced network management features including:

· QoS & VLAN- Supports multiple PVC configurations as well as VLAN tagging (802.1p). · Filtering – Easily apply content filtering based on URL or domain name and create IP/MAC rules to
block traffic originating from or destined to the specified IP or MAC addresses. · Scheduling – The Internet accessibility and the wireless function can be scheduled. · VPN – Provides VPN connectivity using PPTP or L2TP, plus IPSec VPN for creating virtual links
between two endpoints. · IGMP proxy – Supports IGMP for multicast group membership and traffic management. · Firewall – Continuously monitors Internet traffic and protects various Internet attacks, including

D-Link DSL-226 User Manual

3

Section 1 – Product Overview
SYN/RST attack, Ping attack, and FIN/PSH attack. · Remote Management – The DSL-226 can be remotely provisioned with configuration profiles uploaded
by service providers, eliminating on-site management and reducing time for large-scale deployment.

• Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.

D-Link DSL-226 User Manual

4

Section 1 – Product Overview

Hardware Overview
Back Panel

3

12

4

5

1

Power Button Power on/off switch.

2 Power Connector Connector for the supplied power adapter.

3 WAN/LAN (1) Port Connects to a DSL/cable modem or router or a local host at speeds of up to 100 Mbps.

4

Fast Ethernet Ports Connects to Ethernet devices such as computers, switches, storage (NAS) devices and game

(2-4)

consoles at speeds of up to 100 Mbps.

5

DSL Port

Connects to a DSL-enabled telephone line.

D-Link DSL-226 User Manual

5

Section 1 – Product Overview

Side Panel

1

2

3

Long Press: Press to enable or disable the wireless function. Press and hold this button for about 4

1

WLAN/WPS Button seconds and release it to enable or disable the wireless function. Short Press: Press to start the WPS process and automatically create an encrypted connection to a

WPS client. Refer to the next page for the LED indicators of the WLAN and WPS functions.

2

USB 2.0 Port

Connects to USB flash drives to share content.

Reset Button Press to reset the device to its factory default settings. Press the reset button by inserting the end

3 (on the bottom of of a straightened paper clip into the hole and hold this button for about 5 seconds and release it

the device)

to reset the device. During the reset process, all lights will turn off and back on again.

D-Link DSL-226 User Manual

6

Section 1 – Product Overview

Hardware Overview
LEDs

1 23

4

5 6 78

1

Power

2

DSL

3 Internet

4 Ethernet (4-2) 5 WAN/LAN (1)

Solid green Solid red
Blinking red
Solid green Blinking green
Off Solid green Blinking green
Solid red Blinking red
Off
Solid green Blinking green
Off
Solid green Blinking green
Off

D-Link DSL-226 User Manual

Lights up green when the router is powered on and operating normally. When the router boots up or reboots, the LED lights up red. It also lights up red during the factory reset and firmware upgrade process (when the Internet LED also flashes). It flashes red when an error occurs.
Lights up green when the DSL connection is established through the DSL port. Flashes green when the port is negotiating a connection. Off indicates these is no DSL connection.
Lights up green when there is an Internet connection. Flashes green when there is Internet activity. It is red when an Internet connection failure occurs (due to authentication failure, IP assignment failure, etc.). It flashes red when firmware upgrade is in progress. Off indicates there is no broadband connection available.
Lights up green when the respective LAN port is connected. It flashes green when there is activity on this LAN port. Off indicates the LAN port is not connected.
Lights up green when the Ethernet WAN port has established a successful connection. It flashes green when there is activity on this port. It is off when a connection failure occurs or the port is not connected.
7

Section 1 – Product Overview

6

Wireless

7

WPS

8

USB

Solid green Blinking green
Off
Solid green Blinking green
Off
Solid green Blinking green
Off

Lights up green when the wireless network is enabled. Flashes green when there is wireless activity. Off indicates wireless function is disabled.
Lights up green when a Wi-Fi Protected Setup is established successfully. Flashes green when the WPS process is active. Off indicates that WPS is idle.
Lights up green when a USB device is connected and detected. It flashes green when data is being transmitted through the USB port. Off indicates no USB device is connected.

D-Link DSL-226 User Manual

8

Section 2 –

Installation

Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage.
Note: This installation section is written for users who are setting up their home Internet service with the DSL-226 Wireless N300 VDSL2/ADSL2+ Modem Router for the first time. If you are connecting to an existing cable/NBNTM/UFB modem or connection box, you may need to modify these steps according to your broadband technology or plan .
Before you Begin
· Make sure to have your DSL service information provided by your Internet Service Provider handy. This information is likely to include your DSL account’s username and password. Your ISP may also supply you with additional WAN configuration settings which are necessary to establish a connection. This information may include the connection type (DHCP IP, Static IP, or PPPoE) and parameter settings such as VLAN ID.
· If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or take a picture of your existing setup before making any changes.
· We suggest setting up your DSL-226 from a single device and verifying that it is connected to the Internet before connecting additional devices.
· If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE connection software such as WinPoET, BroadJump, or EnterNet 300 from your computer as the DSL-226 will be providing this functionality.

D-Link DSL-226 User Manual

9

Section 2 – Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum each wall or ceiling can reduce your adapter’s range from 3 to 90 feet (1 to 30 meters.) Position your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet (0.5 meters) thick, at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3 to 6 feet or 1 to 2 meters) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.

D-Link DSL-226 User Manual

10

Section 2 – Installation
Manual Setup
Note: Power off your network devices, including your existing connection box/modem and PC.
1 Position your DSL-226 near your PC and a telephone wall jack that provides DSL service. Keep the router in an open area for better wireless coverage.

WALL JACK

DSL-226

PC

2-1

Use the DSL-226 as both a modem and router. Plug one end of the supplied DSL phone cable into the DSL port on the back of the router and the other end into the telephone wall jack with the supplied microfilter installed in between.

a. Connect the supplied microfilter to your telephone wall jack with the cable labelled WALL SOCKET.

b. Connect the supplied phone cable from the MODEM port on the microfilter to the DSL port of the router.

WALL JACK

D-Link DSL-226 User Manual

Microfilter
11

Section 2 – Installation

2-2

Use the DSL-226 as a router only. Plug one end of the supplied Ethernet cable into the WAN port on the back of the router and the other end to your existing cable/UFB/NBNTM connection box or modem. Then power on the connection

box.

DSL/cable modem
PC
Note: The WAN/LAN port has to be configured to a physical WAN port. You also need to configure the WAN connection type to connect to the Internet properly (refer to Internet – Ethernet on page 34).
3 Connect the supplied power adapter to the router and a power outlet, and press the power button. The device LEDs will light up. Wait approximately three minutes before proceeding to the next step. Caution: Use only the included power adapter with this product.

POWER OUTLET DSL-226

WALL JACK PC

D-Link DSL-226 User Manual

12

Section 2 – Installation
4 Plug one end of the supplied Ethernet cable into a yellow Ethernet port on the back of the router, and the other end into the Ethernet port on your computer.
If you are setting up the DSL-226 using a laptop or mobile device, connect to it using the Wi-Fi network name and password printed on the label attached to the bottom of your device.

NB

DSL-226

PC

Power

DSL

D-Link DSL-226 User Manual

13

Section 3 –

Getting Started

Getting Started
There are two ways you can configure your router to connect to the Internet and connect to your clients:
· D-Link Setup Wizard – This wizard will launch when you log into the router for the first time. Refer to Setup Wizard on page 15.
· Manual Setup – Log into the router and manually configure it. Refer to Configuration on page 21.

D-Link DSL-226 User Manual

14

Section 3 – Getting Started
Setup Wizard
If this is your first time using the router, open your web browser and enter the IP address of the router (default: http://192.168.1.1). The default password for admin is printed on the bottom of the device.
The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Depending on your Internet service and network environment, ensure that your DSL port is connected to the wall jack or the Ethernet WAN port is connected to an active Internet connection.
Click Next to continue.

192.168.1.1

WAN Access Type would attempt to detect your connection type as VDSL, ADSL or Ethernet automatically. You may also select the WAN connection method and enter the related settings manually.
Click Next to continue.

D-Link DSL-226 User Manual

15

Section 3 – Getting Started
Setup Wizard (continued)
If the router cannot determine your connection type, a list of connection types to choose from will be displayed. Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue.

If the router detected or you selected PPPoE/PPPoA, enter your PPPoE/PPPoA username and password and choose the Connection Type if asked, then click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.

D-Link DSL-226 User Manual

16

Section 3 – Getting Started
Setup Wizard (continued)
If you selected Static IP Address, enter the IP address, subnet mask, gateway address, and DNS servers provided by your ISP, then choose the Connection Type if asked. Click Next to continue.

D-Link DSL-226 User Manual

17

Section 3 – Getting Started
Setup Wizard (continued)
If the router detected or you selected Dynamic IP Address (DHCP), choose the Connection Type if asked. Click Next to continue.
If you selected Bridge Mode, choose the Connection Type if asked. Click Next to continue.

D-Link DSL-226 User Manual

18

Section 3 – Getting Started
Setup Wizard (continued)
Create a Wi-Fi SSID and password for the 2.4 GHz wireless network. The SSIDs must be between 3 and 32 alphanumeric characters in length and can include space, hyphens, underscores, periods, and the @ symbol. The password must contain 8 to 63 alphanumeric characters including a mix of uppercase and lowercase letters, numbers, and special characters with the exception of the following characters: / ` & % ” | .
Your wireless clients must use the correct SSID and password in order to connect to your wireless network.
Click Next to continue.
To help protect your router, please enter a new password. You will be prompted for this password every time you want to use the router’s web configuration utility. Click Next to continue. Passwords must contain 1 to 15 alphanumeric characters and must not contain special characters.

D-Link DSL-226 User Manual

19

Section 3 – Getting Started
Setup Wizard (continued)
The Summary window will display your settings. Click Next if you are satisfied, or click Back to make changes to your configurations. The wizard will close and your settings will be saved.
Congratulations, setup is complete. You can access the Setup Wizard again from the web configuration utility: go to Settings > Wizard.

D-Link DSL-226 User Manual

20

Section 4 –

Configuration

Configuration
To access the configuration utility, open a web browser such as Google Chrome and enter: http://192.168.1.1
Input the default password as printed on the device label attached to the bottom of the device . If you previously followed the Setup Wizard (see page 15), please use the admin password you entered during the wizard. Then, click Log In to proceed.
Note: If you cannot remember your password and cannot log in, press the reset button (see page 6) to restore the router to its default settings. However, all your configurations will be erased.
Home
The Home page displays the current status of the router in the form of an interactive diagram. There are four main sections: Internet, the DSL-226, Connected Clients, and USB Device. You can click each icon to display information about each section at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to the Settings, Features, and Management functions. You may quickly jump back Home at any time.
Note: The system will automatically log out after a period of inactivity.

D-Link DSL-226 User Manual

21

Section 4 – Configuration
Internet
To bring up more details about your Internet connection, click on the Internet icon. The Internet Connection status being displayed will reflect the status of the currently selected WAN configuration: DSL, IPv4, IPv6, VPN, or 4G.
If your Internet is disconnected, indicated by a red X, you can launch the Setup Wizard to correct the issue by clicking Wizard from the Settings menu at the top of the page.
To reconfigure the Internet settings, refer to Internet on page 30.

D-Link DSL-226 User Manual

22

Section 4 – Configuration
IPv4/IPv6
Click the IPv4/IPv6 button to see the IPv4/IPv6 information for the DSL or WAN interface.

IPv4/IPv6
Internet Type: Displays the current connection type: Ethernet, ADSL or VDSL. Cable Status: Displays the current cable connection status.
Link Rate: Displays the Internet connection speed. Connection Type: Displays the network protocol used to obtain an IP address.
Network Status: Displays the current network connection status. IP Address: Displays the current WAN IPv4 or IPv6 address.
Subnet Mask: Displays the current subnet mask of the IP address. Default Gateway: Displays the current IPv4/IPv6 default gateway.
Prefix: Prefix identifies the subnet of a network in IPv6 addressing scheme. Primary DNS Displays the current primary DNS server.
Server: Secondary DNS Displays the current secondary DNS server.
Server:
Click Go to Settings below to go to the Internet configuration page.

D-Link DSL-226 User Manual

23

Section 4 – Configuration
DSL
Click the DSL button to see the DSL port connection information. The DSL tab displays information regarding the DSL data connection. DSL
Line State: Displays the current status of the data link connection to your ISP. Modulation: Displays the current DSL standard in use. Annex Mode: Displays the current Annex mode in use.
DSL (Sync) Displays time duration of the DSL connection. Uptime:
SNR Margin: Displays the Signal-to-Noise Ratio margin, which measures the connection quality by measuring the ratio of the signal power and the noise power.
Line Attenuation: Displays the current signal attenuation, which measures how much the signal’s strength has been degraded.
Data Rate: Displays the currently negotiated connection speed. Output Power: Displays the output power of the DSL modem.
FEC, CRC: These error correction counts are used for diagnostic purposes. If you are having trouble with the connection to your ISP, these values may provide useful information for technicians.
D-Link DSL-226 User Manual

FEC: CRC:

0/5 36/0

24

Section 4 – Configuration

VPN

The VPN status displays the tunnel status of the VPN connection.

Connected 172.17.94.53

VPN
VPN Type: Displays the protocol used for VPN. VPN Status: Displays the connection status. VPN Server IP: Displays the IP address of the VPN server.
VPN IP: Displays the IP address used for VPN connection. VPN Gateway: Displays the IP address used for VPN gateway.
Click Go to Settings below to go to the VPN configuration page.

D-Link DSL-226 User Manual

25

Section 4 – Configuration
4G
Click the 4G button to see the 4G mobile information for 4G LTE USB adapter.
4G
Status: Displays the connection status. IP Address: Displays the current WAN IP address. Subnet Mask: Displays the current subnet mask of the IP address. Default Gateway: Displays the current default gateway for the 4G connection. Primary DNS Displays the current primary DNS server.
Server: Secondary DNS Displays the current secondary DNS server.
Server:
Click Go to Settings below to go to the Internet configuration page.

D-Link DSL-226 User Manual

26

Section 4 – Configuration
DSL-226
Click on the DSL-226 icon to view details about the router and its wireless settings.
Here you can see the router’s current wireless networks settings such as SSID and password, as well as the local area network MAC and IPv4 addresses.
To reconfigure the network settings, click Go to Settings at the lower right. You can also click Settings > Network at the top to access the configuration page. Refer to Network on page 54 for more information.
To reconfigure the wireless settings, click Go to Settings at the lower right. You can also click Settings > Wireless at the top to access the configuration page. Refer to Wireless on page 48 for more information.

D-Link DSL-226 User Manual

27

Section 4 – Configuration
Connected Clients
Click on the Connected Clients icon to view details about the clients currently connected to the router and their IP and MAC addresses.
To edit a client’s settings, click the Edit icon of the client you want to edit.

Edit Rule
Name: Enter a custom name for this client.
Vendor: Displays the vendor of the client network adapter.
MAC Address: Displays the MAC address of the device.
IP Address: Displays the IP address for this client. You can reserve an IP address for this client by enabling the below Reserve IP.
Reserve IP: Enable this option to reserve this IP address for this client. Go to Settings > Network >DHCP Reserve to obtain more information on DHCP reservation.
Click Save when you are done.

D-Link DSL-226 User Manual

28

Section 4 – Configuration
USB Device
Click on the USB Device icon to view details about the currently connected USB device as well as the SharePort and Windows File Sharing settings.
If you have a USB device connected, you can see its name and how much free space it has.
To configure your USB settings, click Go to Settings or click Settings > USB to obtain more information on USB configuration.
For information on how to access your USB drive from a Windows-based PC refer to Connect and Share a USB Storage Device on page 84.

D-Link DSL-226 User Manual

29

Section 4 – Configuration
Settings
Wizard
To access the Setup Wizard page, go to Settings > Wizard. This is the same wizard that appears when you start the router for the first time. Refer to Setup Wizard on page 15 for more information.
Internet
The following pages will describe how to connect your DSL-226 to the Internet. To access this page, go to Settings > Internet at the top of the page. The DSL-226 supports multiple WAN connection types. We recommend that you set up Internet WAN connections one at a time, save the configuration, and confirm the connection works before returning to this section to add additional WAN connections. Different WAN access types are described in the following sections.
WAN CONNECTION TYPE
Configure your Select the WAN interface to configure. The options are ADSL, VDSL WAN Connection: and Ethernet.
Select a WAN Connection and refer to its configuration page for setup information. For ADSL, refer to Internet – ADSL on page 31. For VDSL, refer to Internet – VDSL on page 33. For Ethernet, refer to Internet – Ethernet on page 34.

D-Link DSL-226 User Manual

30

Section 4 – Configuration

Internet – ADSL

ADSL is one of the first home broadband technologies introduced. ADSL uses the DSL port on your DSL-226 to connect to the Internet. In order for your DSL-226 to use ADSL, you must configure the WAN Connection Type and related WAN settings.
WAN Connection Type
Configure your Select ADSL to configure ADSL connection settings. WAN connection:
ADSL VC Settings
Interface: Select a configuration interface for this virtual circuit. The system supports up to 8 PVCs.
Enable Virtual Enable this option to configure Virtual Circuit information. Circuit:
VPI: Enter the Virtual Path Indicator (0 – 255). It is used to identify the path for packet routing.
VCI: Enter the Virtual Channel Indicator (32 – 65535). It is used to define the channel for packets transmission.
Service Category: Select the service category which defines the transmission parameters and performance: UBR, CBR, NRT-VBR, or RT-VBR.

D-Link DSL-226 User Manual

31

Section 4 – Configuration

Internet – ADSL (continued)

If you selected CBR, NRT-VBR, or RT-VBR, configure the following additional options:
Peak Cell Rate Enter the Peak Cell Rate in cells per second (0-5500). (PCR):
If you selected NRT-VBR or RT-VBR, the additional following options are available:
Sustainable Cell Enter the Sustainable Cell Rate in cells per second (0~5500). Rate (SCR):
Maximum Burst Enter the Maximum Burst Size in MB per second (0~5500). Size (MBS):
VLAN Settings
Enable Vlan ID Enable or disable VLAN settings.
Vlan ID Enter the VLAN ID. Enter a value from 1 – 4094.
To set your IPv4/IPv6 connection parameters of WAN connection, refer to Connection Types on page 35.

D-Link DSL-226 User Manual

32

Section 4 – Configuration

Internet – VDSL

VDSL is one of the latest and fastest home broadband technologies. VDSL uses the DSL port on your DSL-226 to connect to the Internet. In order for your DSL-226 to use VDSL, you must configure the WAN Connection Type and related WAN settings.
Configure your Select VDSL to configure VDSL connection settings. WAN connection:
If you click on Advanced Settings, the following WAN Settings are available:
VDSL VC Settings
Service Number: Select a service number for setting VDSL virtual circuit. The system supports up to 8 VCs.
Enable Virtual Enable or disable virtual circuit configuration. Circuit:
VLAN Settings
Enable VLAN ID: Enable or disable VLAN settings.
VLAN ID: Enter the VLAN ID. Enter a value from 1 – 4094.
To set your IPv4/IPv6 connection parameters of WAN connection, refer to Connection Types on page 35.

D-Link DSL-226 User Manual

33

Section 4 – Configuration

Internet – Ethernet

Your DSL-226 is equipped with a multi-purpose Megabit Ethernet LAN/WAN port which can be used to connect to the Internet. This port can also be used to connect to other Ethernet based networks. In order for your DSL-226 to use Ethernet, you must configure the WAN Connection Type and related WAN settings.
Configure your Select Ethernet to configure Ethernet connection settings. To use the WAN connection: LAN/WAN port for WAN connection, please enable the LAN to WAN
Setting control to designate the LAN/WAN port on the back of the device as a physical WAN port (go to Settings > Network > Advanced Settings). The default is disabled (i.e. a LAN port).
VLAN Settings
Enable Vlan ID: Enable or disable VLAN settings.
Vlan ID: Enter the VLAN ID. Enter a value from 1 – 4094.
IPv4 Settings
Connection: Select the connection method for your Internet and refer to the respective configuration page for setup information.
For Dynamic IP (DHCP) Address, refer to Connection Type: Dynamic IP (DHCP) on page 35. For Static IP Address, refer to Connection Type: Static IP on page 37. For PPPoE, refer to Connection Type: PPPoE on page 39. For PPPoA, refer to Connection Type: PPPoA on page 41. For Bridge Mode, refer to Connection Type: Bridge Mode on page 43.

D-Link DSL-226 User Manual

34

Section 4 – Configuration

Connection Types Connection Type: Dynamic IP (DHCP)

Select Dynamic IP Address (DHCP) to obtain an IP address automatically from your ISP. Select this option if your ISP does not provide you with a specific IP address.
IPv4 Settings
Connection: Select Dynamic IP Address (DHCP).
Protocol: Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing mechanism. If you choose IPv6, refer to the below IPv6 Settings.
Connection Type: Select Bridged IP LLC, Bridged IPVC-Mux, Routed IP LLC, or Routed IP VC-Mux as the encapsulation method. This is only available for ADSL.
Advanced Settings
MTU: Maximum Transmission Unit (576-1516) – you may need to change the MTU for optimal performance with your ISP. The default is 1492.
Usage: Select None or Default Route to use this WAN connection type as the default route.
NAT Enable: Network address translation (NAT) translates private IP addresses to public IP addresses prior to allowing private IP networks to connect to the public network.
Enable PPPoE Enable or disable PPPoE traffic to pass through this VC configuration. Passthrough It allows hosts behind the router to establish a PPPoE connection to
an external server.

D-Link DSL-226 User Manual

35

Section 4 – Configuration
G.Vector This option raises VDSL2 connection’s data date and cover range by eliminating cross-talk in copper infrastructure. This is only available for VDSL.
IPv6 Settings
IPv6 Message This displays the IP assignment method. Fetch Type:
DHCP IPv6 Enable: Select the IPv6 auto-configuration type: SLAAC (IPv6 StateLess Address AutoConfiguration) or DHCP (Dynamic Host Configuration Protocol).
DHCP PD Enable or disable prefix delegation. Enable:
MLD Proxy: Multicast Listener Discovery (MLD) can be used to forward IPv6 multicast traffic between another router and the hosts behind this router.
Click Save when you are done.

D-Link DSL-226 User Manual

36

Section 4 – Configuration

Connection Type: Static IP

Select Static IP Address if your ISP provides you with a specific IP address.
IPv4 Settings
Connection: Select Static IP Address.
Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing mechanism. If you choose IPv6, refer to the below IPv6 Settings.
Connection Type: Select Bridged IP LLC, Routed IP LLC, Routed IPVC-Mux or Bridged IP VC-Mux as the encapsulation method. This is only available for ADSL.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Gateway Address: Enter the default gateway address provided by your ISP.
Primary DNS Enter the primary DNS server IP address assigned by your ISP. This Server address is usually obtained automatically from your ISP.
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This Server address is usually obtained automatically from your ISP.
Advanced Settings
MTU: Maximum Transmission Unit (576-1516) – you may need to change the MTU for optimal performance with your ISP.
Usage: Select None or Default Route to use this WAN connection type as the default route.

D-Link DSL-226 User Manual

37

Section 4 – Configuration
NAT Enable: Network address translation (NAT) translates private IP addresses to public IP addresses prior to allowing private IP networks to connect to the public network.
Enable PPPoE Enable or disable PPPoE traffic to pass through this VC configuration. Passthrough It allows hosts behind the router to establish a PPPoE connection to
an external server.
IPv6 Settings
IPv6 Message This displays the IP assignment method. Fetch Type:
IPv6 Address Enter an IPv6 address in this format: x:x:x:x:x:x:x:x/y (where each x represents a hexadecimal digit, y is an integer from 1 to 128 as the prefix length), for example, 2001:b011:2000:0012::1/64.
IPv6 Default Enter the IP address of the default gateway. Gateway:
IPv6 DNS Server Enter the DNS server address. 1:
IPv6 DNS Server Enter the secondary DNS server address as a backup. 2:
MLD Proxy: Multicast Listener Discovery (MLD) can be used to forward IPv6 multicast traffic between another router and the hosts behind this router.
Click Save when you are done.

D-Link DSL-226 User Manual

38

Section 4 – Configuration

Connection Type: PPPoE

Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet.
WAN Settings
Connection: Select PPPoE.
Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing mechanism. If you choose IPv6, refer to the below IPv6 Settings.
Username: Enter the username provided by your ISP.
Password/Confirm Enter the password provided by your ISP. Then enter it again to confirm Password: your entry.
Connection Type Select either PPPoE LLC or PPPoE VC-Mux as the encapsulation type for the data. This option is only available for ADSL WAN Connection Type.
Advanced Settings
Service Name Enter the optional PPPoE service name.
AC name Enter the optional remote PPPoe Server name.
MTU: Maximum Transmission Unit – you may need to change the MTU for optimal performance with your ISP. The default is 1492.
Usage: Select None or Default Route to use this WAN connection type as the default route.

D-Link DSL-226 User Manual

39

Section 4 – Configuration

NAT Enable: Network address translation (NAT) translates private IP addresses to public IP addresses before allowing private IP networks to connect to the public network.

Authentication Select the authentication protocol your ISP uses. The options are Protocol: Auto, PAP, or CHAP.

Enable PPPoE Enable or disable PPPoE traffic to pass through this configuration. It Passthrough: allows hosts behind the router to establish a PPPoE connection to
an external server.

G.Vector This option raises VDSL2 connection’s data date and cover range by eliminating cross-talk in copper infrastructure. This is only available for VDSL.

Connect Mode Set the connection to be Always-on or Connect-On-Demand. Select:

If you selected Connect-On-Demand, the following option is available:

Maximum Idle Enter the amount of time in minutes the router will maintain the Time: Internet connection before disconnecting it if there is no activity.

IPv6 Settings

DHCP IPv6 Mode: Select the IPv6 auto-configuration type: StateLess Address AutoConfiguration (SLAAC) or Dynamic Host Configuration Protocol (DHCP).
DHCP PD Enable or disable prefix delegation. Enable:

MLD Proxy: Multicast Listener Discovery (MLD) can be used to forward IPv6 multicast traffic between another router and the hosts behind this router.

Click Save when you are done.

D-Link DSL-226 User Manual

40

Section 4 – Configuration

Connection Type: PPPoA

Select PPPoA if your ISP provides and requires you to enter a PPPoA username and password in order to connect to the Internet. This setting is only available for ADSL WAN Connection Type.

WAN Settings

Connection: Select PPPoA.

Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing mechanism. If you choosse IPv6, refer to the below IPv6 Settings.

Username: Enter the username provided by your ISP.

Password/Confirm Enter the password provided by your ISP. Then enter it again to confirm Password: your entry.

Connection Type Select either PPPoA LLC or PPPoA VC-Mux as the encapsulation type for the data.

Advanced Settings

MTU: Maximum Transmission Unit – you may need to change the MTU for optimal performance with your ISP. The default is 1492.

Usage: Select None or Default Route to use this WAN connection type as the default route.

NAT Enable: Network address translation (NAT) translates private IP addresses to public IP addresses before allowing private IP networks to connect to the public network.

Authentication Select the authentication protocol your ISP uses. The options are Protocol: Auto, PAP, or CHAP.

D-Link DSL-226 User Manual

41

Section 4 – Configuration
Connect Mode Set the connection to be Always-on, Connect-On-Demand, or Select: Manual.
If you selected Connect-On-Demand, the following option is available:
Maximum Idle Enter the amount of time in minutes the router will maintain the Time: Internet connection before disconnecting it if there is no activity.
IPv6 Settings
DHCP IPv6 Mode: Select the IPv6 auto-configuration type: StateLess Address AutoConfiguration (SLAAC) or Dynamic Host Configuration Protocol (DHCP).
MLD Proxy: Multicast Listener Discovery (MLD) can be used to forward IPv6 multicast traffic between another router and the hosts behind this router.
DHCP PD Enable or disable prefix delegation. Enable
Click Save when you are done.

D-Link DSL-226 User Manual

42

Section 4 – Configuration

Connection Type: Bridge Mode

Select Bridge Mode to use the DSL-226 as a network bridge to extend an existing network.
IPv4 Settings
Connection: Select Bridge Mode.
Protocol Select IPv4, IPv6 or IPv4/IPv6 for both IPv4 and IPv6 addressing mechanism.
Connection Type: Select Bridged Only LLC or Bridged Only VC-Mux as the encapsulation method. This is only available for ADSL and Ethernet WAN Connection Type.
Enable Enable this option to allow large packets (greater than 9000 bytes). Large Packet This option is only available for VDSL and ADSL types. Passthrough:
G.Vector This option raises VDSL2 connection’s data date and cover range by eliminating cross-talk in copper infrastructure. This is only available for VDSL.
Click Save when you are done. Or click Delete to delete the configuration profile for the interface.

D-Link DSL-226 User Manual

43

Section 4 – Configuration
VPN
A Virtual Private Network (VPN) is used to establish a virtual, encrypted connection over an existing network utilizing tunneling protocol such as PPTP or L2TP. To access this page, go to Settings > VPN. Configure the following to set up a VPN connection to a VPN server:
VPN Settings
VPN: Select Point-to-Point Tunneling Protocol (PPTP) or Layer 2 Tunneling Protocol (L2TP).
Server Address: Enter the PPTP or L2TP server address.
Username: Enter the username for connection authentication.
Password: Enter the password for connection authentication. VPN is Used: Select to the Internet if the VPN is created for connecting to the
Internet for all traffic through the WAN interface or to the virtual private network if the VPN is created to facilitate encapsulated and encrypted connections to another network across an existing Internet connection. Note: It is required that you have configured WAN settings (go to Settings > Internet) before creating a VPN connection.
Click Save when you are done.

D-Link DSL-226 User Manual

44

Section 4 – Configuration

IPSec

IPSec facilitates VPN communications with security capabilities. This page allows you to create an IPSec tunnel between two sites and set parameters for authentication method and encryption algorithm. Click Add Rule and configure the following to set up an IPSec profile for VPN connections:
IPSec Settings
Connection Name: Name this IPSec connection.
Local Gateway IP: Enter the IP address of the local gateway for this tunnel.
Remote Gateway Enter the IP address of the remote gateway for this tunnel. IP:
Local Access Select either Single IP or Subnet. Note that the local and remote Range: access range should use different subnetworks.
Local IP Address: Enter the IP address of the local device that can use this tunnel.
IP Subnet Mask: Enter the subnet mask if you choose Subnet for Local Access Range.
Remote Access Select either Single IP or Subnet. Note that the local and remote Range: access range should use different subnetworks.
Remote IP Enter the IP address of the remote device that can use this tunnel. Address:

D-Link DSL-226 User Manual

45

Section 4 – Configuration
IP Subnet Mask: Enter the subnet mask if you choose Subnet for Remote Access Range.
Pre-Shared Key: Enter a pre-shared key to authenticate a remote peer. Up to 16 characters including symbols can be entered. Both local and remote device of the VPN tunnel must use the same pre-shared Key.
Perfect Forward Enable or disable Perfect Forward Secrecy. It uses public key Secrecy: cryptography to improve the security of IPSec data communication.
NAT Traversal: Enable or disable NAT traversal for the negotiation of an IPSec VPN connection. It allows IPSec VPN traffic to pass if NAT is used on the gateways.
Key Exchange Phase 1
Exchange Mode: Select Main, Aggressive or Base. The Main mode sends first two messages for negotiating the encryption and authentication method. In general, Aggressive mode is faster than the Main mode but offers less protection against authentication security. Unlike the Aggressive and Main Mode, the Base Mode can transmit the key exchange information and authentication data together .
Encryption Select encryption method as the algorithm for encrypting data Algorithm: packets. The options are DES, 3DES, AES-128, AES-192 or AES-256.
Authentication The authentication algorithm validates data packets. Select MD5, Algorithm: SHA1, or SHA256. Both local and remote device of the VPN tunnel must use the same authentication algorithm. Both MD5 and SHA are one- way hashing algorithm but produce different number of digest bit.
Diffie-Hellman The Diffie-Hellman key exchange protocol offers different prime key Group: lengths. Select 768, 1024, 1536, 2048, 3072, or 4096 bit.

D-Link DSL-226 User Manual

46

Section 4 – Configuration
Key Life Time: Enter the amount of time that a key is active in Phase 1. Then select the unit: Seconds, Minutes or Hours.
Key Exchange Phase 2
Encryption Select encryption method as the algorithm for encrypting data Algorithm: packets. The options are DES, 3DES, AES-128, AES-192 or AES-256.
Authentication The authentication algorithm validates data packets. Select MD5, Algorithm: SHA1, or SHA256. Both local and remote device of the VPN tunnel must use the same authentication algorithm. Both MD5 and SHA1 are one- way hashing algorithm but they produce different length of digest bits.
Diffie-Hellman The Diffie-Hellman key exchange protocol offers different prime key Group: lengths. Select 768, 1024, 1536, 2048, 3072, or 4096 bit.
Key Life Time: Enter the amount of time that a key is active in Phase 2. Then select the unit: Seconds, Minutes or Hours.
Click Save when you are done. You can create up to 7 IPSec profiles.

D-Link DSL-226 User Manual

47

Section 4 – Configuration
Wireless
You can configure your wireless LAN (WLAN) on this page. To access this page, go to Settings > Wireless.
Status: Enable or disable the 2.4 GHz wireless network. The default is enabled.
Wi-Fi Name (SSID): Create a name for your wireless network.
Password: Create a password to use for wireless security. The password rule should conform with the below security selected. Refer to the following wireless security sections. The available security types are None, WEP-64Bit, WEP-128Bit, WPA, WPA2, and WPA/WPA2.
Show Password: Enable this option to display the entered password.
Wi-Fi Protected Setup
Start WPS: This triggers the WPS pairing process. The WPS LED on the front panel will start to flash. Refer to WPS Button on page 91 for more information about WPS.
Click Save when you are done. The following pages describe the Advanced Settings configuration options in detail.

D-Link DSL-226 User Manual

48

Section 4 – Configuration
Advanced Settings
Clicking Advanced Settings allows you to manually configure security, wireless radio operation, and schedule settings.
Security: Choose None, WEP (WEP-128Bit, WEP-64Bit), WPA (WPA2, WPA or WPA2/WPA). Select None for unsecured network if it is what you intend. The default is WPA2 with pre-shared key.
WPA
Wi-Fi Protected Access (WPA) offers stronger encryption algorithm than WEP (Wired Equivalent Privacy) with dynamic key change capability. WPA2 provides the latest and most robust encryption among these security methods and thus is recommended.
Security: WPA2 (the default), WPA or mix of WPA2/WPA.
WPA Type
802.1x uses a RADIUS (Remote Authentication Dial-In User Service) server for user authentication. If you selected 802.1x, the following options are available:
Server IP Address: Enter the IP address of the RADIUS Server.
Port: Enter the port used by the RADIUS Server.
Secret: Enter the secret used by the RADIUS Server.
Cipher Type: Select either AES, TKIP or Both (AES/TKIP). The options vary depending on the WPA type selected. AES is recommended as it is more advanced than TKIP.

D-Link DSL-226 User Manual

49

Section 4 – Configuration

Advanced Settings (continued)

Group Key Enter the Group Key Interval (10 – 4194303) the timing for rekeying Interval: the group temporal key. The default is 3600 seconds.
If you selected Pre-shared key, an alphanumeric passphrase will be required, enter it in the password field above. Note the password must contain 8 to 63 characters and include a mix of uppercase and lowercase letters, numbers, and special characters except the following: / ` & % ” |. The following options are also available:
Cipher Type: Select either AES, TKIP or Both (AES/TKIP). The options vary depending on the WPA type selected. AES is recommended if other types are presented.
Group Key Enter the Group Key Interval (10 – 4194303) as the timing for rekeying Interval: the group temporal key. The default is 3600 seconds.
WEP
Wireless Equivalent Privacy (WEP) offer only basic encryption capability and is less secure than WPA. Thus, WPA is the preferred method.
Security: WEP-64Bit: Enter 5 alphanumeric characters. WEP-128Bit: Enter 13 alphanumeric characters.
Note: WPS will be disabled when WEP is used.
Authentication Type
Select either Shared or Open. These two types differ in the authentication process before association with an access point.
Click Save when you are done. The following pages describe more configuration options in Advanced Settings in detail.

D-Link DSL-226 User Manual

50

Section 4 – Configuration
Advanced Settings (continued)
Advanced Settings
Hide SSID: The default setting is Disabled. Select Enabled if you do not want to broadcast the Wi-Fi name or SSID of your wireless network.
WMM: Enable or disable Wi-Fi Multimedia Quality of Service (WMM QoS) for your wireless network. This can help to improve the quality of video and voice applications for your wireless clients. The default is enabled.
Signal-Interval: Set the rate at which your wireless network is advertised. The range is 20 -1000 and default is 100 milliseconds.
DTIM: Specify the Delivery Traffic Information Map (DTIM) message interval. Higher DTIM values can help conserve power at the cost of slight latency. The range is 1-255 and default is 1.
Transmitting Select the desired wireless transmission power. The available options Power: are 100%, 50%, 25%, or 12.5%. The default is 100%.
Threshold for The fragmentation threshold, which is specified in bytes, determines fragmentation: whether packets will be fragmented. Packets exceeding the 2346
byte threshold will be fragmented before transmission. The range is 256-2346 and 2346 is the default setting.
802.11 Mode: Select the desired wireless networking standard(s) to use. The available options are 11B only, 11G only, Mixed 11G/B, 11N only, Mixed 11G/N, and Mixed 11N/G/B.
Channel Width: Channel Width is available if you selected 11N, Mixed 11G/N, or Mixed 11N/G/B for 802.11 Mode. Select 20/40 if you are using both of 802.11g/b and 802.11n devices or select 20 MHz if you want to disable 40 MHz bandwidth communication. The recommended setting is 20/40.

D-Link DSL-226 User Manual

51

Section 4 – Configuration
Advanced Settings (continued)
20/40 MHz Co- Enable or disable the existence of both 20 MHz and 40 MHz channel Exist: width. Keep it enabled to achieve the maximum operability of wireless products using different standards in your environment. However, it might prevent your 802.11n devices from reaching the maximum performance.
Short Guard This option is available for 11N wireless standard. This increases data Interval : rate by lowering the guard interval to 400 ns. The default is enabled.
Channel: Select the desired channel for your wireless network to use. The default is Auto (recommended).
Preamble Type: This defines the length of the CRC block for communication between the wireless router and the devices. Ensure that all your wireless devices use the same type. Select Enabled to set it to short and Disabled to set it to long.
Schedule : Use the drop-down menu to select the time schedule for which the wireless network will be available. The schedule may be set to Always, or you can create your own schedules in the Schedule section. Refer to Time & Schedule on page 74 for more information.
WI-FI PROTECTED SETUP
The easiest way to connect your wireless devices to your device is with Wi-Fi Protected Setup (WPS).
Start WPS: Press this button to establish a connection with another WPS compatible device. Note that the WPS only works with WPA2 security method.
Click Save when you are done.

D-Link DSL-226 User Manual

52

Section 4 – Configuration
Guest Zone
The Guest Access feature creates a separate network from your local network. It allows guest devices to access the Internet but not the servers and resources in your local network. This prevents guest users exposure of your local network.

Status Enable or disable the guest zone. The status is disabled by default.

Wi-Fi Name Create a name for your wireless network. (SSID)

Password Create a password to use for wireless security. The password rule depends on the security type selected below.

Show Password Enable or disable the display of the password.

Security

Choose None, WEP (WEP-128Bit, WEP-64Bit), WPA ( WPA2, WPA or WPA2/WPA). Select None for unsecured network if it is what you intend. Refer to the above sections (WEP on page 50 and WPA on page 49) for explanation of these security methods.

Schedule

Use the drop-down menu to select the time schedule for which the wireless network will be available. The schedule may be set to Always, or you can create your own schedules in the Schedule section. Refer to Time & Schedule on page 74 for more information

Click Save when you are done.

D-Link DSL-226 User Manual

53

Section 4 – Configuration
Network
This section allows you to change the local network settings of the router and to configure the DHCP settings. Go to Settings > Network to access this page.
Router Settings
Router IP Address: Enter the IP address of the router to be identified in your local network. The default IP address is 192.168.1.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility.
Subnet Mask: Enter the subnet mask of this interface. The default subnet mask is 255.255.255.0.
Enable Second IP: Enter another IP address of the router to be identified in another local subnetwork.
Second Subnet Enter the subnet mask of the second interface. The default subnet Mask: mask is 255.255.255.0.
Click Save when you are done or click Advanced Settings.
Advanced Settings
DHCP Server Settings
Disable DHCP Select this option to disable the DHCP server. No further configuration Server: is available. If you choose to disable the router’s DHCP server, there should be other DHCP server on your network or you must configure the LAN devices’ IP addresses manually.

D-Link DSL-226 User Manual

54

Section 4 – Configuration

Network – Advanced Settings

Enable DHCP Select this option to enable the DHCP server. Server:
Enter the following settings to configure your DHCP server:
DHCP IP Specify the start and end IP addresses for the range of addresses to Address Range: be assigned by your router.
DHCP Lease Time: Select the DHCP lease time from the drop down menu: 1 Hour, 2 Hours, 3 Hours, 1 Day, 2 Days, 3 Days, or 1 Week. The default is 1 Day.
Primary DNS The Domain Name System (DNS) translates domain or website names Server: into Internet addresses or URLs. Enter the DNS server’s IP address.
Secondary DNS Enter the secondary DNS server’s IP address. Server:
Option60 Vendor Enter Option 60 information here to be included in the DHCP request ID: communication.
DHCP Relay: Select this option to enable DHCP Relay. Use this if you have a dedicated DHCP server on your network, then enter the server IP address.
Click Save when you are done.
LAN IPv6 Settings
IPv6 Global Enter a valid IPv6 address with prefix length, for example, Address: 2000:dc8:abcd:0015::0/64
Radvd Enable or disable the Router Advertisement Daemon (RADVD) for Enable: advertising the essential network configuration for the local network
with other devices using IPv6 addressing scheme.

D-Link DSL-226 User Manual

55

Section 4 – Configuration

Radvd Mode: Select the mode for RADVD: Auto or Manual. If selecting Manual, enter the IPv6 prefix configuration manually.

RA Flags Set:

Configure both ManagedAddr and OtherConfig. Set it to on so the router allows clients to obtain an IPv6 address automatically when a DHCPv6 service is available. ManagedAddr incorporates DHCPv6 address information while OtherConfig incorporates information other than DHCPv6 address.

DHCP6 Server: Enable or disable DHCPv6 service.

DHCPv6 Mode: Select the prefix assignment method: Auto or Manual.

If you selected Manual for RADVD, configure the following settings:
Prefix/Length: Enter the IPv6 prefix, for example, 3ffe:501:ffff:100::/IPv6 prefix length (16-64).

Prefix Preferred Enter the preferred lifetime of the prefix (300-4294967295 seconds).. Lifetime: The default is 3600.
Prefix Valid Enter the valid lifetime of the prefix (300-4294967295 seconds). The Lifetime: default is 7200.
If you selected Manual for DHCPv6 Mode, configure the following settings:

Prefix/Length: Enter the IPv6 prefix, for example, 3ffe:501:ffff:100::/IPv6 prefix length (16-64).

Prefix Preferred Enter the preferred lifetime of the prefix (300-4294967295 seconds).. Lifetime: The default is 3600.
Prefix Valid Enter the valid lifetime of the prefix (300-4294967295 seconds). The Lifetime: default is 7200.

D-Link DSL-226 User Manual

56

Section 4 – Configuration

Primary DNS Enter the DNS server’s IP address. Server:
Secondary DNS Enter the secondary DNS server’s IP address. Server:

UPnP Settings

UPnP allows network devices to seamlessly discover each other on the local network for network services such as file sharing and advanced media functions. Select this option to allow UPnP (Universal Plug and Play) on the local network.

LAN to WAN Setting

Enable the LAN to WAN Setting control to designate the LAN/WAN port on the back of the device as a physical WAN port. Keep the default Disable setting to designate this port as a LAN port.

D-Link DSL-226 User Manual

57

Section 4 – Configuration
DHCP Reserve
This section allows you to assign a static IP address to a specific computer on your LAN. Go to Settings > Network and click the DHCP Reserve tab to access this page.
Click Add Rule to add a new entry to reserve an IP address to a client device:
IP Address: Enter an IPv4 address to be assigned. MAC Address: Select a device from the available clients’ MAC addresses.
Click Apply when you are done to close the screen. Click Save when you are done adding the rules.

D-Link DSL-226 User Manual

58

Section 4 – Configuration
USB
This page allows you to set up access to files on an external USB device plugged into the router. Then you can perform file sharing through local network. To access this page, go to Settings > USB.
DLNA Settings
DLNA: Enable or disable the DLNA media server functions, allowing connected DLNA clients access to media files over the network. The default is disabled.
Samba Setup
Samba: Enable or disable Windows File Sharing or Samba. Computers and devices which support Samba will be able to access the files on the USB device connected to this router. The default is disabled.
Work Group: Enter the Windows workgroup name.
Net BIOS Name: Enter the name for this device as you wish it to appear on your network.
Username: Enter a username for authentication for access.
Password: Enter a password for authentication for access.
Click Save when you are done.

For information on how to access your USB drive from a Windows-based PC refer to Connect and Share a USB Storage Device on page 84.

D-Link DSL-226 User Manual

59

Section 4 – Configuration

USB Modem

The USB port can be inserted with a 3G/4G mobile broadband adapters to be a backup of your primary Internet connection. On this page, you can check and edit the router’s configuration for the USB modem (if one is inserted). To access this page, go to Settings > USB and select the USB Modem tab.
4G Status

Status: Enable or disable the USB modem. If it is enabled, the router will use the USB modem to connect to the Internet instead of the DSL or Ethernet WAN port. The default is disabled.
4G Backup: Enable the USB modem to be a backup of the primary Internet connection. When the primary Internet connection fails, it will be active and resume the connection. The default is disabled.
Connection Settings

Select the connection method: Always On, Connect On-Demand, or Connect Manually.
If you selected Connect On-Demand, enter the following option:

Close if Idle for Enter a maximum idle time in minutes to wait before closing the Minutes: connection due to inactivity.
f you selected Connect Manually, enter the following option: PPP Select the authentication method for Point-to-Point Protocol (PPP)
Authentication: connections: PAP, Auto, or CHAP.
Default Route: Enable or disable default route established through your USB modem for Internet connection.
NAT: Enable or disable Network Address Translation (NAT).

TCP MTU: Enter the Maximum Transfer Unit (100-1492). The default is 0.

Click Save when you are done.

D-Link DSL-226 User Manual

60

Section 4 – Configuration

Features

Firewall
The router’s firewall protects your network from malicious attacks over the Internet. To access this page, go to Features > Firewall. It is recommended to leave all values at their default Enable setting.

Firewall

Enable DOS Denial of Service (DoS) protection prevents attacks such as Ping of and Portscan Death and others as the following described.
Protection:
SYN/TCP reset TCP reset breaks the three-way TCP connection between two parties attack: by sending a spoofed RST packet.

SYN/RST attack: SYN/RST attack sends continuous SYN packets to a targeted network device, causing the device to spawn a half-open connection by sending back a TCP SYN-ACK packet (Acknowledge) and waiting for a packet in response from the sender address (response to the ACK packet).
SYN/FIN attack: This type of Denial of Service attacks a targeted device by continuously sending illegitimate SYN-FIN packets.
Ping/Ping of The Ping of Death attack aims to disrupt a targeted network device Death attack: by sending abnormally large packets.

FIN/URG/PSH A URG-ACK-PSH-FIN flood attack brings down a device by sending attack: illegitimate URG-ACK-PSH-FIN packets.
Xmas attack: Christmas tree attack sends crafted TCP packet to obtain information about the target system.
Null scanning In Null Scanning attack, a packet without any flags of the TCP header attack: tries to exploit a system.

Click Save when you are done.

D-Link DSL-226 User Manual

61

Section 4 – Configuration

NAT
Go to Features > Firewall and click the NAT tab to configure the router’s advanced firewall settings such as DMZ and Application Level Gateway (ALG).

Interface Name:

Select the interface where the packets coming into the WAN port will be redirected to a specific IP address in DMZ. PVC denotes the WAN port configured with ADSL service and PTM denotes the WAN port configured with VDSL service.

Enable DMZ

Enable or disable Demilitarized Zone (DMZ). Devices in this zone are completely exposed to threats over the Internet. This is not recommended unless they are servers that must be exposed to the public network.

DMZ IP Address If you enable DMZ, enter the IP address of the client to be placed in this zone.

Application Level Gateway (ALG) Configuration
Different ALGs provide special handling for specific protocols or applications to allow data of these applications to pass through an NAT-enabled router. For each protocol type, click Enable to activate the ALG. A number of ALGs for common applications are enabled by default.
Enable L2TP Allows multiple machines on the LAN to connect to their corporate ALG: network using the Layer 2 Tunneling Protocol (L2TP).

D-Link DSL-226 User Manual

62

Section 4 – Configuration

Enable IPSec ALG:

Allows VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal.

Enable H.323 H.323 standard provides VoIP telephony and video conferencing. ALG: Enable ALG for H.323 if such applications will be used in your network.

Enable RTSP Allows applications that use Real Time Streaming Protocol (RTSP) to ALG: receive streaming media from the Internet.

Enable SIP ALG:

Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. This is disabled by default.

Enable FTP ALG: Allows devices running FTP (File Transfer Protocol) to provide such service successfully through the NAT router.

Enable PPTP Allows machines on the LAN to connect to their corporate network ALG: using the PPTP protocol.

Click Save when you are done.

D-Link DSL-226 User Manual

63

Section 4 – Configuration
Application
Port triggering allows ports to be opened for inbound traffic when outbound traffic is detected on specified ports . This is used for facilitating communication between applications and servers behind a NAT firewall. To access this page, go to Features > Application.
The currently defined Application rules are displayed in the table. Some commonly used Applications are pre-configured by default. If you wish to remove an application rule, click . If you wish to edit an application rule, click in the Edit column. If you wish to create a new application rule, click the Add Rule button.

Create New Rule

Name: Enter a name for this application.

Trigger Port Start: Enter the starting port range for the traffic that will be forwarded (1-65535).

Trigger Port End: Enter the ending port range for the traffic that will be forwarded (1-65535).

Trigger Traffic Select the protocol to trigger this rule: TCP, UDP, or All Protocol. Protocol Type:

Open Port Start: Enter the starting port to open once triggered (1-65535).

Open Port End: Enter the ending port to open once triggered (1-65535).

Open Traffic Select the protocol to trigger this rule: TCP, UDP, or All Protocol. Protocol Type:

Click Apply when you are done. A maximum of 16 rules can be defined.

D-Link DSL-226 User Manual

64

Section 4 – Configuration
ACL
The Access Control List (ACL) page allows you to enable or disable various services of the router to be used within the LAN or from the WAN side. To access this page, go to Features > ACL. To start enforcing the ACL, click Activated.
Access Control Setup
ACL Rule Index: Select the rule index from the drop-down menu.
Active Activate or deactivate this particular access rule. Activated means the particular service can be accessed by the specified IP address range. Deactivated means the particular service cannot be accessed by the specified IP address range.
Source IP Address: Enter the IP address range to apply the rule to. Only addresses in the specified range have the permission to access this router with the below application. Enter 0.0.0.0 to allow any IP address to access the router.
Application: Select a pre-defined service: Web, Telnet, Ping or All for all of the above services.
ACL Rule Select the interface from the drop-down menu to apply this access IndexInterface: rule: Both, WAN, or LAN. For Telnet, only LAN is available.
Note: When setting ACL rules, be sure of the impact on the operation. For instance, if you modify the default ACL for web access IP range – 0.0.0.0~0.0.0.0 (any IP address) to not Active, then any device on the LAN cannot access the web configuration.
Click Set when you are done or Delete to remove the selected rule. A maximum of 4 rules can be defined.

D-Link DSL-226 User Manual

65

Section 4 – Configuration
Port Forwarding
Port forwarding allows you to specify ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. To access this page, go to Features > Port Forwarding. If you wish to remove a rule, click in the Delete column. If you wish to edit a rule, click in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Port Forwarding Setup
Enable Rules: Enable or disable the port forwarding rule.
Name: Enter a name for this rule.
Internal Start/End Enter the internal start/end port for this type of service. Port:
External Start/End Enter the external port for this type of service. Port:
Internal Server IP: Enter the IP address of the computer on your local network that should receive the service requests.
Protocol Type: Select TCP, UDP or both TCP/UDP. Refer to the documentation for this service hosting on your internal computer.
Click Apply when you are done. After creating a port forwarding rule, you can enable it or disable it. The Status column will reflect its current enable/disable status. A maximum of 16 rules can be defined.

D-Link DSL-226 User Manual

66

Section 4 – Configuration
IP/MAC/Website Filtering
The system contains filtering functions to filter traffic based on the network protocols and source and destination IP addresses or MAC addresses. It also allows you to block access to certain websites. Go to Features > IP/MAC/ Website Filtering to configure filtering rules.

Configure the following settings for IP/MAC filtering:
Filter Type Select IP/MAC Filter. Selection:

Rule Type Selection:
IP / MAC Filter Rule Index:

Select either Blacklist or Whitelist to deny or permit the following filtering list.
Select the rule number for configuration (1-16).

Active: Select Yes or No to activate or deactivate this rule.

Interface: Select the LAN or WAN interface to which the rule should apply.

Direction:
Rule Type:
Source IP Address/Subnet
Mask/Port:

Select Incoming or Outgoing for traffic that is received by the router from an external network (from WAN to LAN) or traffic that is sent out of the router (from LAN to WAN) respectively. Select both to apply both directions to this type of traffic.
Select either IP or MAC. If MAC is selected, enter a MAC address to be filtered. If IP is selected, enter the below IP address information.
Enter the source IP address (and subnet mask) and port that the rule will apply to. Enter 0.0.0.0 for any IP address and 0 for any port number.

D-Link DSL-226 User Manual

67

Section 4 – Configuration

Destination IP Address/Subnet
Mask/Port:
Protocol:

Enter the destination IP address (and subnet mask) and port that the rule will apply to. Enter 0.0.0.0 for any IP address and 0 for any port number.
Select the network protocol for the traffic: TCP, UDP, or ICMP .

Click Set when you finished setting the rule. You can create up to 16 rules.
The created rule should be listed in the below table. To delete a rule, select IP/MAC Filter as the Filter Type, and select the respective Rule Index, then click Delete. To edit a rule, select the respective Rule Index, modify the configuration, then click Set.

Configure the following settings for URL filtering:
Filter Type Select URL Filter. Selection:

Active: Select Yes or No to enable or disable URL filtering.

URL Index: Select the rule number for configuration (1-8).

Individual Active:
Rule Type:

Select Yes or No to activate or deactivate this filtering rule.
Enter the name for the website. This blocks access to websites based on a website’s address. For example, enter “ABC.com” or “www.ABC. com.” Or you may enter the corresponding IP address of a web server.

Click Set when you finished setting the rule. You can create up to 8 rules.
The created rule should be listed in the below table. To delete a rule, select URL Filter as the Filter Type, and select the respective Rule Index, then click Delete. To edit a rule, select the respective Rule Index, modify the configuration, then click Set.

D-Link DSL-226 User Manual

68

Section 4 – Configuration
Static Route
The Static Routes page allows you to define custom routes to control how data traffic is moved around your network. To access this page, go to Features > Static Route. If you wish to remove a rule, click in the Delete column. If you wish to edit a rule, click in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done.
Complete the following to create or edit a rule:
Create New Rule
Destination Enter the destination subnetwork IP address. Address:
Destination Enter the subnet mask of the destination address. The subnet mask Subnet Mask determines an IPv4 subnetwork.
(IPv4):
Gateway IP Enter your next hop gateway to be taken if this route is used. Or select Address: the interface to transit the packets of this static route. (Go to Settings > Internet to obtain the configured WAN interfaces.) PVC denotes the WAN port configured with ADSL service and PTM denotes the WAN port configured with VDSL service.
Metric: The route metric is a value from 0 to 15 that indicates the cost of using this route.
Click Apply when you are done. A maximum of 16 rules can be defined.

D-Link DSL-226 User Manual

69

Section 4 – Configuration
Dynamic DNS
The Dynamic Domain Name System (DDNS) assigns an easy-to-remember domain name such as [YourDomainName].com to a dynamic IP address assigned by your Internet Service Provider. Through the DDNS service provider, people can enter your domain name in their web browser to connect to your server (e.g. FTP or web), no matter what your IP address is. To access this page, go to Features > Dynamic DNS. Complete the following to configure the DDNS:
Dynamic DNS Enable or disable Dynamic DNS. Settings:
DDNS Server: Select your DDNS service provider: www.dyndns.org, zoneedit.com, or www.no-ip.com.
Hostname: Enter the host name that you registered with your DDNS service provider.
Username: Enter the username for your DDNS account.
Password/Confirm Enter the Password for your DDNS account. Then enter the same Password: password again to confirm it.
Click Save when you are done.

D-Link DSL-226 User Manual

70

Section 4 – Configuration
IGMP
The Internet Group Management Protocol (IGMP) allows for the transmission of identical content, such as multimedia, from a source to a number of destination recipients.
Enable Snooping Enable and disable Internet Group Management Protocol (IGMP) Support: snooping to build multicast tables.
IGMP Proxy: Check the box to enable the router to operate as an Internet Group Management Protocol (IGMP) proxy for IPv4 traffic.
Click Save when you are done.

D-Link DSL-226 User Manual

71

Section 4 – Configuration
QoS
Creating QoS helps manage proper resource allocation and reduce network congestion by providing a bandwidth limit to the designated client. The QoS engine ensures that the maximum uplink and downlink bandwidth assigned to the designated client will not exceed.

HostName Select a Device from the drop-down menu.

Uplink Bandwidth
(Mbps)

Set a maximum bandwidth for the content that is being transferred to the Internet from the client. It specifies bandwidth allocation as a bit rate (1-100 Mbit/s); 0 means no limit.

Downlink Bandwidth
(Mbps)

Set a maximum bandwidth for the content that is being transferred to the designated client from the Internet. It specifies bandwidth allocation as a bit rate (1-100 Mbit/s); 0 means no limit.

Cl

Click Save when you are done.
If you wish to modify a QoS rule, click Edit in the Edit field of the desired rule, enter the value in the field as shown in the above description, then click Save. If you wish to delete a QoS rule, click Delete in the Delete field of the desired rule.

D-Link DSL-226 User Manual

72

Section 4 – Configuration
TR069
TR069 allows for automatic configuration between an auto-configuration server (ACS) and your router. To access this page, go to Features > TR069. Please check with your service provider, or leave the settings at their defaults if you are not sure. TR-069
CWMP: Activate or deactivate CPE WAN Management Protocol (CWMP)
ACS Login Information
URL: Specify the URL of the auto-configuration server (ACS), starting with http://.
Username: Enter the username to log in to the ACS remote server.
Password: Enter the password to log in to the ACS remote server.
Connection Request Information
Connection Specify the request path here. Request Path:
Username: Enter the username for connection request sent from the ACS remote server to the router.
Password: Enter the password for connection request sent from the ACS remote server to the router.
Periodic Inform
Periodic Inform: Activate or deactivate the periodic inform function.
Interval: Specify the interval in seconds for each inform packet (1-999999). The default is 5000.
Click Save when you are done.

D-Link DSL-226 User Manual

73

Section 4 – Configuration
Management
Time & Schedule
Time
The Time page allows you to configure, update, and maintain the correct time for the internal system clock. From here you can set the time zone and the Network Time Protocol (NTP). To access this page, go to Management > Time & Schedule.
Auto Sync Enable or disable automatic synchronization of the date and time Network Time with a Network Time Protocol (NTP) server.
Server:
Auto Sync Time Enable or disable automatic time zone selection. If this is disabled, Zone: select your time zone in the following Time Zone drop-down list.
System Displays the current system date and time. Date&Time:
Select Interface Select the interface for network time communication.
NTP Server/2 Select the NTP server address from a list of available NTP servers. If Address: you selected Other, enter the NTP server in the field. Adding a second server is optional. Select None if you don’t want to specify a backup NTP server.
Time Zone Select the router’s time zone from the drop-down list.
Click Save when you are done. To configure and manage the schedule, click the Schedule tab and refer to Schedule on page 75.

D-Link DSL-226 User Manual

74

Section 4 – Configuration
Schedule
Some configuration rules can be set according to a pre-configured schedule. For example, Wi-Fi schedules for wireless network availability (refer to Settings > Wireless). To access this page, go to Management >Time & Schedule and click the Schedule tab.
To edit or create a rule, use the following procedure: First, enter the name of your schedule in the Name field. Please do not enter special characters such as space or !~<>+-. Note that names cannot be modified once a rule is created.
Each box represents one hour, with the time for a 24-hour clock at the top of each column. To add a time period to the schedule, simply click on the start hour and drag to the end hour. You can add multiple periods per day and multiple days to the schedule.
To remove a time period from the schedule, click on the x icon. Click Apply when you are done to close the screen.
If you wish to remove a schedule, click in the Delete column. If you wish to edit a rule, click in the Edit column. If you wish to create a new schedule, click the Add Rule button. A maximum of 10 schedules can be created.

D-Link DSL-226 User Manual

75

Section 4 – Configuration
Log Info
The router keeps a running log of events. To access this page, go to Management > Log Info. System logging must be enabled in order for this feature to work.
Refer to System Log on page 77 for information on how to enable the system logging. Note that the type of log events is determined by the log level setting in System Log.

D-Link DSL-226 User Manual

76

Section 4 – Configuration
System Log
This page controls how the System Log operates. System Log can be used to analyze connectivity problems and troubleshoot a network. This log can be sent to a syslog server or saved to your local hard drive. To access this page, go to Management > Log Info and click the System Log tab.
Save Log File
Save Log File to Click this button to save a copy of the log file to your local hard drive. It Local Hard Drive: will be saved according to your browser’s default download directory.
You can view the log entries by opening the log file with any text editing applications such as WordPad on Windows.
Log Type
System Activity: Activate or deactivate logging for system activities. Enable this to start the system log server.
USB Enable: Activate or deactivate logging on the USB storage. Local Enable: Activate or deactivate logging on the system’s flash of the router. Remote Enable: Activate or deactivate remote logging. If enabled, enter the remote
log server below. Remote Log Enter the IP address or URL address for the Syslog server.
Server:

D-Link DSL-226 User Manual

77

Section 4 – Configuration
Log Level: Select the level of severity as listed from the highest to the lowest to be logged: Emergency: Indicates that the system is in critical condition which can render the system non-functioning. Alarm: Indicates that immediate action is needed. Important: Indicates that the system is in a condition that requires urgent attention. Error: Indicates that there is an error in the device. Warning: Indicates that a warning message of an operational problem . Note: Indicates a normal but not stable condition. Notice: Indicates a condition that is not erroneous but requires some attention. Debug: Contains debugging messages for debugging purposes.
Click Save when you are done.

D-Link DSL-226 User Manual

78

Section 4 – Configuration

System Settings

This page allows you to save the router’s current configuration, load a previously saved configuration, reset the router to its factory defaults, or reboot the router. To access this page, go to Management > System Settings.
Device Information
Hardware Version: Displays the hardware version of the router.
Firmware Version: Displays the current firmware version.
System Settings
Reboot the Click Reboot to reboot the router. Device:
Restore to Factory This option will restore all configuration settings back to the settings Default Settings: that were in effect at the time the router was shipped from the factory. Any settings after that time will be lost, including any rules that you have created. You can save the current router configuration settings before performing factory restoration with the Save Settings to Local Hard Drive function below.
Save Settings to This option will save the current router configuration settings to a file Local Hard Drive: (.cfg) on your computer. Click Save to save the configuration file to your
browser’s default download directory.This configuration file can be used to restore your router to a previous state with the Load Settings From Local Hard Drive below.
Load Settings This option will load a previously saved router configuration file. This will From Local Hard overwrite the router’s current configuration. Click Select File to locate the
Drive: configuration file from your local directory, then click Upload Settings to start uploading the configurations. Note: The router will reboot during the restoration process. Do not turn the power on or off.

D-Link DSL-226 User Manual

79

Section 4 – Configuration
Admin
This page allows you to change the administrator (admin) password and enable remote management of the router. To access this page, go to Management > System Settings, and click the Admin tab.
Administrator Settings
Password: Enter a new password for the admin account.You will need to enter this password whenever you configure the router using a web browser. Note that passwords must contain 1 to 15 characters and it must not include special characters.
Confirm Password: Confirm the administrator account password.
Click Save when you are done.

D-Link DSL-226 User Manual

80

Section 4 – Configuration
Firmware Upgrade
This page allows you to upgrade the router’s firmware. To access this page, go to Management > Firmware Upgrade.
Firmware Information
Current Firmware Displays the current firmware’s version. Version:
Firmware Date: Displays the current firmware’s timestamp.
Firmware Update
Upgrade If you wish to upgrade manually, first download the firmware file you Firmware: wish to upgrade to. Next, click the Select File button and locate the
firmware file. Then, click Upload to begin the upgrade process. Do not power off the router while the firmware is being uploaded; otherwise, errors will occur that may result in malfunction of the router and further RMA services may be required.

D-Link DSL-226 User Manual

81

Section 4 – Configuration
Statistics
This page gives you various statistics about data transmitted and received by your router through the Internet and on your wired network (LAN) and your wireless networks. To access this page, go to Management > Statistics.
You can view the statistics of the Internet, LAN, or Wireless 2.4 GHz interface by clicking on the respective tab at the top of the graph. The current amount of traffic being sent and received, measured in kilobyte per second is displayed, along with the current number of sessions. The graph will update every few seconds.
The table at the bottom of the page displays the total number of packets and the amount of data sent and received since the DSL-226 started.
Note: The traffic counter will reset when the device restarts.

D-Link DSL-226 User Manual

82

Section 4 – Configuration
Diagnostics
This page provides functions to test the router’s connection to another device in the Internet. To access this page, go to Management > Diagnostics. Select the Ping Test or Traceroute Test function. The ping test verifies the availability of a destination host while the traceroute shows the route of data transferred to a destination host.
Ping/Traceroute Test
To perform a test, enter the IP address or web address in the Address field, select either Ping test or Traceroute, then click Run test.
The results of the test will be displayed in the text box below.

D-Link DSL-226 User Manual

83

Section 5 –

Connect and Share a USB Device

Connect and Share a USB Storage Device
After you have successfully installed and configured your D-Link Modem Router, you are ready to enjoy the benefits of D-Link’s USB sharing technology. This allows you to quickly and easily share a USB storage device with multiple computers on your network. The DSL-226 will share a FAT32 or NTFS-formatted USB storage device using the Samba file sharing protocol. Once connected, you can copy, move, delete, and edit files over the network like you would with any ordinary drive attached to your computer. First, connect a USB storage device to the USB Port on the DSL-226.

USB Port

D-Link DSL-226 User Manual

84

Section 5 – Connect and Share a USB Device
Connecting from a Windows-Based PC
It is required that all of your devices are connected to the same wireless network as the DSL-226.
Step 1 – Press the Windows logo key + E to open File Explorer.

Step 2 – Select This PC from the left pane. Then, on the Computer tab, select Map network drive. On Windows 11, select More …. and select Map network drive at the top.

D-Link DSL-226 User Manual

85

Section 5 – Connect and Share a USB Device
Step 3 – Select the drive letter you wish to map your network drive to. In the Folder box, enter the DSL-226’s IP address (or the NetBIOS name) and the name of the USB volume, for example, \192.168.1.1 usb1_1. You may also click Browse… to locate the networked device and mapped drive.
Check the boxes Reconnect at Sing-in (if you want to connect every time you sign in to your PC) and Connect using different credentials.
Click Finish.
If you have multiple USB storage devices attached via a USB hub, click USB Device from the Home page of the DSL-226’s Web Configuration utility for a list of available volume names.

D-Link DSL-226 User Manual

86

Section 5 – Connect and Share a USB Device
Step 4 – Enter the username and the password to connect to the router and click OK. Also check the Remember my credentials box. The credentials can be found on the USB settings page (refer to Settings > USB).
Congratulations! Your files are now shared. The new network drive can be found in your File Explorer. You can access it without having to type its network name each time. Repeat this process from each Windows PC you wish to share your USB drive with.

D-Link DSL-226 User Manual

87

Section 5 – Connect and Share a USB Device
Connect and Share with DLNA Devices
The DSL-226 can also stream media files using Digital Living Network Alliance (DLNA). With other DLNA-enabled devices, you can share photos, music, and videos stored in the USB drive with other computers and devices on your network . Connect a USB storage device to the USB Port on the DSL-226 first.

USB Port

D-Link DSL-226 User Manual

88

Section 5 – Connect and Share a USB Device
Accessing from File Explorer on Windows
Note: It is required that all of your devices are connected to the same wireless network as the DSL-226.
Step 1 – Enable network discovery on Windows: Go to Control Panel > Network and Internet > Network and Sharing Center and select Change advanced sharing settings on the left.

Step 2 – Network sharing settings can be configured differently for different network profiles. Select Turn on network discovery for your private network or choose the desired network. Also select Turn on automatic setup of network connected devices.
Step 3 – Enable media streaming: Go back to the previous menu and select Media streaming options. Click Turn on media streaming if it says that Media streaming is not turned on.

D-Link DSL-226 User Manual

89

Section 5 – Connect and Share a USB Device
Step 4- Click Network to list connected network devices on your network in your File Explorer.

Step 5 – Double-click your DSL-226 listed under Media Devices. The Windows Media Player will start automatically. You can then browse your shared media under Other Libraries and play them directly.

D-Link DSL-226 User Manual

90

Section 6 –

Connecting to a Wireless Network

Connect a Wireless Client to Your Router
WPS Button
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras have a WPS button (or a software utility with WPS) that you can press to connect to the DSL-226. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below: Step 1 – Press the WPS button on the DSL-226 for a short time (long-press will disable the Wi-Fi function).
The WPS LED on the front panel will start to blink.

WPS Button

Step 2 – Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).

Step 3 – Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected using WPA2 encryption.

D-Link DSL-226 User Manual

91

Section 6 – Connecting to a Wireless Network

Windows® 11/10
WPA/WPA2

When connecting to the DSL-226 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here. Otherwise, refer to the product label on the bottom of the device for the default Wi-Fi network SSID and password or enter the Wi-Fi credentials set during the product configuration.

To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it.

Wireless Icon

Clicking on the Network icon , , or to enable Wi-Fi to display a list of wireless networks which are within the range of your computer. Select the desired network by clicking on the SSID.

D-Link DSL-226 User Manual

92

Section 6 – Connecting to a Wireless Network
To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the Connect automatically check box.
You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. Your computer will now automatically connect to this wireless network when it is detected. You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your router and you will be automatically connected.

D-Link DSL-226 User Manual

93

Section 6 – Connecting to a Wireless Network
Windows® 8
WPA/WPA2
Please configure the wireless security (WPA/WPA2) method on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password).

To join an existing network, locate the wireless network icon in the taskbar next to the time display.
Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name.

Wireless Icon

D-Link DSL-226 User Manual

94

Section 6 – Connecting to a Wireless Network
You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function.
When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to.

D-Link DSL-226 User Manual

95

Section 6 – Connecting to a Wireless Network
Windows® 7
WPA/WPA2
Please configure the wireless security (WPA/WPA2) method on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).

2. The utility will display any available wireless networks in your area.

Wireless Icon

D-Link DSL-226 User Manual

96

Section 6 – Connecting to a Wireless Network
3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button.
If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.

4. The following window appears while your computer tries to connect to the router.

5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click OK. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.

D-Link DSL-226 User Manual

97

Section 7 –

Troubleshooting

Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DSL-226. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to these examples.
1. Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web- based utility.
· Make sure you have an updated Java-enabled web browser. We recommend the following:
– Microsoft Internet Explorer® 7 or higher/Edge – Mozilla® Firefox – GoogleTM Chrome – Apple® Safari 7 or higher
· Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable, or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on.
· Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate and Norton Personal Firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it.

D-Link DSL-226 User Manual

98

Section 7 – Troubleshooting
· Access the web configuration. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web configuration.
· If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.
To reset the router, locate the reset button (a hole) on the bottom of the unit. With the router powered on, hold the button down for 5 seconds and release the button. The router will go through its reboot process (all LEDs will be off and on again). Wait about 30 seconds to access the router. The default IP address is 192.168.1.1. When logging in, enter the admin password shown on device label attached to the bottom of the device.

D-Link DSL-226 User Manual

99

Section 7 – Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to encrypted sites such as banking sites and web mail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL.
· Click on Start and then click Run. or · Click on Start and type cmd in the Search box.
· Once Command Prompt opens, you’ll need type the ping command with parameters. Use the following syntax:
ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size.

D-Link DSL-226 User Manual

100

Section 7 – Troubleshooting
To change the MTU rate on your router follow the steps below:
· Open your browser, enter the IP address of your router (192.168.1.1) and click OK.
· Enter the admin password (default device password is on the device label). Click OK to enter the web configuration page for the device.
· Go to Settings > Internet. Then select the desired WAN connection type and the respective configuration. Choose the Advanced Settings.
· To change the MTU, enter the number in the MTU field and click Save to save your settings.
· Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.

D-Link DSL-226 User Manual

101

Appendix A – Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to- use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products allows you to access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link.

D-Link DSL-226 User Manual

102

Appendix A –

Wireless Basics

What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network.
How does wireless work?
Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer.
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it.
Home Uses/Benefits · Gives everyone at home broadband access · Surf the web, check email, instant message, etc. · Gets rid of the cables around the house · Simple and easy to use

Small Office and Home Office Uses/Benefits · Stay on top of everything at home as you would at office

D-Link DSL-226 User Manual

103

Appendix A – Wireless Basics
· Remotely access your office network from home · Share Internet connection and printer or storage with multiple computers · No need to dedicate office space

Where is wireless used?
Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.
Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or access point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency.

D-Link DSL-226 User Manual

104

Appendix A – Wireless Basics
Channel and Width Selection
Auto channel is recommended when configuring channels for the wireless network. However, you can select a particular channel to avoid congested channels. For 2.4 GHz, channels 1, 6, and 11 do not overlap, which reduces the possibility of interference and increases reliability. Channel bonding allows 20 MHz to bond together to increase the channel width to 40, doubling the data transmission capacity of the wireless network. For 802.11n, you can select 20/40 MHz Channel Width. In general, higher channel width should be used to meet performance requirement, for example, applications that provide location- based services and content streaming. On the other hand, lower channel width should be used for deployment with high density of AP devices and to accommodate mobile devices with older standards.
Signal Strength
Even though you may have chosen the least congested channel, connection reliability requires strong signals. Factors such as the number of walls or obstacles (especially metal objects) between your access point and client PC, the distance between the PC and the AP, and the position of the AP or router as well as your PC affect the strength of a wireless signal.
The signal strength can be obtained from the built-in utility of the desktop or mobile devices. For example, the Windows wireless connection icon uses the number of bars to indicate the signal strength of the wireless network. On an Android phone there is also the wireless connection icon displaying signal strength for wireless networks in range (go to Settings > Network & Internet > Internet).
Encryption
Don’t let your next-door neighbors or intruders connect to your wireless network. Encrypt your wireless network by turning on the latest encryption on the router. Create a long passphrase with random characters and change it regularly.

D-Link DSL-226 User Manual

105

Appendix B –

Networking Basics

Networking Basics

Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start and type cmd in the Search box.
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters.

D-Link DSL-226 User Manual

106

Appendix B – Networking Basics

Statically Assign an IP address
1. If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Windows® 11/10 Windows® 7 /8 Windows® XP

Start> Settings > Network & Internet. Start > Control Panel > Network and Internet > Network and Sharing Center Start > Control Panel > Network Connections

2. Select Wi-Fi > Manage known networks. For Windows 7/8/XP, click Change adapter settings. Choose the network you want to modify, right-click on it, then select Properties.
3. Under IP assignment, select Edit. For Windows 7/8/XP, Select the Networking tab. Under This connection uses the following items, select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6). Then select Use the Following IP Address.
4. Under Edit network IP settings or Edit IP settings, select Manual. If IPv4 is selected, type the IP address settings in IP address, Subnet prefix length (subnet mask), and Gateway fields. If IPv6 is selected, type the IP address settings in IP address, Subnet prefix length, and Gateway fields. The prefix- length in IPv6 has the same function as the subnet mask in IPv4: determine the subnetwork. However, it is expressed as an integer between 1 through 128 as opposed to four octets in IPv4.
Example: Enter x.x.x.x for IPv4 addressing scheme (where x is between 0 and 255) and xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx for IPv6 addressing scheme (where x is a hexadecimal digit).
Set Preferred DNS the same as the LAN IP address of your router. The Alternate DNS is only optional or you may enter a DNS server from your ISP.
5. When you’re done, click Save.

D-Link DSL-226 User Manual

107

Appendix B – Networking Basics

Wireless Security

This section will show you the different levels of security you can use to protect your data from intruders. The DSL-226 offers the following types of security:

· WPA2/WPA with 802.1x (Wi-Fi Protected Access 2) · WEP (Wired Equivalent Privacy)

· WPA2-PSK/WPA-PSK (Pre-Shared Key)

What is WPA?

WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). WPA has 2 major improvements over WEP:
· Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity- checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. AES is a stronger and more efficient encryption method than TKIP.
· User authentication, which is generally missing in WEP, through the Extensible Authentication Protocol (EAP). WEP regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. This key must be the exact same key entered on your wireless router or access point.
The WPA2/WPA with 802.1x option features WPA2/WPA used in coordination with a RADIUS server for user authentication in an organization or enterprise environment. The exchange of authentication information between wireless clients and a RADIUS server employs Extensible Authentication Protocol (EAP).

D-Link DSL-226 User Manual

108

Appendix C –

Technical Specifications

Technical Specifications

Device Interfaces · One RJ-11 DSL port · 802.11n/g/b1,2 Wireless LAN · One 10 /100Base-TX Ethernet WAN/LAN port · Three 10/100Base-TX Ethernet LAN ports · One USB 2.0 port
Standards · IEEE 802.11n/g/b · IEEE 802.3/u/i
ADSL Standards · G.dmt/G.lite/G.hs/VBR, CBR, UBR · ITU-T G.992.5/ G.992.3/ G.992.2/ G992.1
VDSL Standards · ITU-T G.993.5 · Profile 8a/8b/12a/12b/17a/30a/35b
Antenna Types · Two external antennas
Wireless Signal Rate1,2 · 2.4 GHz up to 300 Mbps2

Power · Input: 100 to 240 V AC, 50/60 Hz · Output: 12 V DC, 1 A
Operating Temperature · 0 to 40 °C (32 to 104 °F)
Storage Temperature · -20 to 70 °C (-4 to 158 °F)
Operating Humidity · 5% to 95% maximum (non-condensing)
Storage Humidity · 5% to 95% maximum (non-condensing)
Certifications · CE · RCM · RoHS
Dimensions · 141.2 mm (5.6 inches) · 100.1 mm (4 inches) · 35 mm (1.2s inches)

Security
· WEP-128Bit/64Bit · WPATM – Personal/Enterprise · WPA2TM – Personal/Enterprise · Wi-Fi Protected Setup (WPS)

Weight · 150 grams (5.3 ounces)

Notes:
1. Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
2. Frequency Range varies depending on country’s regulation.

D-Link DSL-226 User Manual

109

Appendix D –

Regulatory Statements

Regulatory Statements

2.4 G

Frequency Band(s) Frequenzband Fréquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s)
2.4 ­ 2.4835 GHz

Max. Output Power (EIRP) Max. Output Power Consommation d’énergie max. Potencia máxima de Salida Potenza max. Output Max. Output Power
100 mW

D-Link DSL-226 User Manual

110

Appendix D – Regulatory Statements
European Community Declaration of Conformity:

Cesky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] [Greek] Français [French]

Tímto D-Link Corporation prohlasuje, ze tento produkt, jeho píslusenství a software jsou v souladu se smrnicí 2014/53/EU. Celý text ES prohlásení o shod vydaného EU a o firmwaru produktu lze stáhnout na stránkách k produktu www.dlink.com.
D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv 2014/53/EU. Den fulde tekst i EU- overensstemmelseserklæringen og produktfirmware kan wnloades fra produktsiden hos www.dlink.com.
Hiermit erklärt die D-Link Corporation, dass dieses Produkt, das Zubehör und die Software der Richtlinie 2014/53/ EU entsprechen. Der vollständige Text der Konformitätserklärung der Europäischen Gemeinschaft sowie die Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur Verfügung.
Käesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on kooskõlas direktiiviga 2014/53/EL. Euroopa Liidu vastavusdeklaratsiooni täistekst ja toote püsivara on allalaadimiseks saadaval tootelehel www.dlink. com.
Hereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive 2014/53/EU. The full text of the EU Declaration of Conformity and product firmware are available for download from the product page at www.dlink.com
Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas 2014/53/UE. El texto completo de la declaración de conformidad de la UE y el firmware del producto están disponibles y se pueden descargar desde la página del producto en www.dlink.com.
, D-Link Corporation , 2014/53/. www.dlink. com.
Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux directives 2014/53/UE.Le texte complet de la déclaration de conformité de l’UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à www.dlink.com.

D-Link DSL-226 User Manual

111

Appendix D – Regulatory Statements

Italiano [Italian] Latviski [Latvian] Lietuvi [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Português [Portuguese] Slovensko[Slovenian] Slovensky [Slovak]

Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com.
Ar so uzmums D-Link Corporation apliecina, ka sis produkts, piederumi un programmatra atbilst direktvai 2014/53/ES. ES atbilstbas deklarcijas pilno tekstu un produkta apartprogrammatru var lejupieldt attiecg produkta lap vietn www.dlink.com.
Siuo dokumentu ,,D-Link Corporation” pareiskia, kad sis gaminys, priedai ir programin ranga atitinka direktyv 2014/53/ES. Vis ES atitikties deklaracijos tekst ir gaminio programin aparatin rang galima atsisisti is gaminio puslapio adresu www.dlink.com.
Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/ EU. De volledige tekst van de EU conformiteitsverklaring en productfirmware is beschikbaar voor download van de productpagina op www.dlink.com.
Bil-preenti, D-Link Corporation tiddikjara li dan il-prodott, l-aessorji, u s-software huma konformi mad-Direttiva 2014/53/UE. Tista’ tniel it-test si tad-dikjarazzjoni ta’ konformità tal-UE u l-firmware tal-prodott mill-pana talprodott fuq www.dlink.com.
Ezennel a D-Link Corporation kijelenti, hogy a jelen termék, annak tartozékai és szoftvere megfelelnek a 2014/53/ EU sz. rendeletek rendelkezéseinek. Az EU Megfelelségi nyilatkozat teljes szövege és a termék firmware a termék oldaláról tölthet le a www.dlink.com címen.
D-Link Corporation niniejszym owiadcza, e ten produkt, akcesoria oraz oprogramowanie s zgodne z dyrektywami 2014/53/EU. Pelen tekst deklaracji zgodnoci UE oraz oprogramowanie sprztowe do produktu mona pobra na stronie produktu w witrynie www.dlink.com.
Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware
Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za prenos na strani izdelka na www.dlink.com.
Spolocnos D-Link týmto vyhlasuje, ze tento produkt, príslusenstvo a softvér sú v súlade so smernicou 214/53/ EÚ. Úplné znenie vyhlásenia EÚ o zhode a firmvéri produktu sú k dispozícii na prevzatie zo stránky produktu www. dlink.com.

D-Link DSL-226 User Manual

112

Appendix D – Regulatory Statements

Suomi [Finnish] Svenska[Swedish] Íslenska [Icelandic] Norsk [Norwegian]

D-Link Corporation täten vakuuttaa, että tämä tuote, lisävarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Täydellinen EU- vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com.
D-Link Corporation försäkrar härmed att denna produkt, tillbehör och programvara överensstämmer med direktiv 2014/53/EU. Hela texten med EU- försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com.
Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun 2014/53/EB. Sækja má ESB- samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www. dlink.com.
Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet 2014/53/EU. Den fullstendige teksten i EU-erklæring om samsvar og produktets fastvare er tilgjengelig for nedlasting fra produktsiden på www.dlink.com.

Warning Statement:
The power outlet should be near the device and easily accessible.

D-Link DSL-226 User Manual

113

Appendix D – Regulatory Statements
NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY):
· This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference.
· This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, and CY.
Usage Notes:
· To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed.
· This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point.
· Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless.
HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPÄISCHEN GEMEINSCHAFT ( NUR FÜR EIN DRAHTLOSES PRODUKT )
· Der Betrieb dieses Geräts in der Europäischen Gemeinschaft bei Nutzung von Kanälen im 5,15-5,35 GHz Frequenzband ist ausschließlich auf Innenräume beschränkt, um das Interferenzpotential zu reduzieren.
· Bei diesem Gerät handelt es sich um ein zum Einsatz in allen EU- Mitgliedsstaaten und in EFTA-Ländern – ausgenommen Frankreich. Der Betrieb dieses Geräts ist in den folgenden Ländern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Gebrauchshinweise:
· Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und Kanalbeschränkungen, dem jeweiligen Land, in dem das Gerät zum Einsatz kommt, entsprechend, auf die Produkte angewandt.
· Die Funktionalität im Ad-hoc-Modus bei Betrieb auf 5 GHz ist für dieses Gerät eingeschränkt. Bei dem Ad-hoc-Modus handelt es sich um eine Peer-to- Peer-Kommunikation zwischen zwei Client-Geräten ohneeinen Access Point.
· Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt.
AVIS CONCERNANT L’UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL)
· Cet appareil est limité à un usage intérieur lorsqu’il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz afin de réduire les risques d’interférences.

D-Link DSL-226 User Manual

114

Appendix D – Regulatory Statements
· Cet appareil est un système de transmission à large bande (émetteur- récepteur) de 2,4 GHz, destiné à être utilisé dans tous les Étatsmembres de l’UE et les pays de l’AELE. Cet équipement peut être utilisé dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Notes d’utilisation:
· Pour rester en conformité avec la réglementation nationale européenne en matière d’utilisation du spectre, des limites de fréquence et de canal seront appliquées aux produits selon le pays où l’équipement sera déployé.
· Cet appareil ne peut pas utiliser le mode Ad-hoc lorsqu’il fonctionne dans la bande de 5 GHz. Le mode Adhoc fournit une communication directe pair à pair entre deux périphériques clients sans point d’accès.
· Merci de vous référer au guide d’utilisation ou de la fiche technique afin de vérifier si votre produit utilise 2.4 GHz et/ou 5 GHz sans fil.
AVISO DE USO DE LA LAN DE RADIO INALÁMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO INALÁMBRICO)
· El uso de este dispositivo está restringido a interiores cuando funciona en la Comunidad Europea utilizando canales en la banda de 5,15-5,35 GHz, para reducir la posibilidad de interferencias.
· Este dispositivo es un sistema de transmisión (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros de la UE y en los países de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Notas de uso:
· Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarán limitaciones de frecuencia y canal en los productos en función del país en el que se pondrá

References

• ABC Network - ABC.com
• Smart Home, SMB and Enterprise solutions | D-Link
• ESG - D-Link Company
• Smart Home, SMB and Enterprise solutions | D-Link
• ESG - D-Link Company
• My Dyn Account
• Free Dynamic DNS - Managed DNS - Managed Email - Domain Registration - No-IP
• Yahoo is part of the Yahoo family of brands
• DNS Hosting, Dynamic DNS and Domain Management with Zoneedit – The Original DNS Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>