KOAMTAC 1SCC Base Charging Cradle User Guide
- July 13, 2024
- KOAMTAC
Table of Contents
KOAMTAC 1SCC Base Charging Cradle
Product Information
Specifications
- Charging Options: USB-C, DC Connector
- Compatible Devices: XCover6 Pro, SKX6Pro, XCover7, KDC1000/1100, iPhone 15/15 Pro
- Power Adaptors: Samsung 25W PD Charger, 12V/10A DC Power Adaptor
Product Usage Instructions
1-Slot Charging via USB-C
- Use a Samsung 25W PD Charger to charge the device.
- Plug the USB-C cable into the side of the charging cradle.
2-Slot Charging via DC Connector
- Use the 12V/10A DC power adaptor to charge multiple devices.
- Connect the DC power adaptor to the designated port on the cradle.
Available Device Spacers
Choose the appropriate spacer based on your device model and accessories.
- XC6P-BASIC Spacer – For XCover6 Pro
- SKX6P-BOOT Spacer – For SKX6Pro with Protective Boot
- XC7-BASIC Spacer – For XCover7
KOAMTAC 1SCC/2SCC/10SCC
Base Charging Cradle
Mini Guide
- All pictures shown are for illustration purpose only.
Actual product may vary.
1/2-Slot Charging via USB-C
Charge the device(s) using a Samsung 25W PD Charger. Plug the USB-C cable from the charger into the side of the charging cradle for 1-slot cradles or the back for 2-slot cradles.(A)
10-Slot Charging via DC Connector
Use the 12V/10A DC power adaptor to charge multiple devices.(B)
Visit our website for more information
100 Village Blvd Ste 300 Princeton, NJ 08540 +1 609-256-4700 р | +1 609-228-4373 f info@koamtac.com | www.koamtac.com
Available Device Spacers
-
XC6P-BASIC Spacer
For XCover6 Pro -
XC6P-SC Spacer
For XCover6 Pro with Smartcase -
XC6P-SC-EXTBAT Spacer
For XCover6 Pro with Smartcase + Smartcase Extended Battery Pack -
SKX6P-BOOT Spacer
For SKX6Pro with Protective Boot -
SKX6P-INSERT Spacer
For SKX6Pro without Protective Boot
SKX6P-PISTOL-NB Spacer
For SKX6Pro Pistol Grip without Protective Boot
SKX6P-PISTOL-BOOT Spacer For XCover6 Pro Pistol Grip with Protective Boot
-
XC7-BASIC Spacer
For XCover7 KDC1000-SXC7 Spacer -
For KDC1000/1100
XCover7 XC7-PISTOL Spacer -
For KDC1000/1100
XCover7 Pistol Grip -
iPhone 15(P) Spacer
For KDC1000/1100 iPhone 15/15 Pro -
iPhone-PISTOL Spacer
For KDC1000/1100 iPhone Pistol Grip -
BAT-XC6P Spacer
For XCover6 Pro Genuine Spare Battery -
BAT-SKX Spacer
For SKX6Pro 2000mAh Extended Battery
Installing Spacers
- Grip the spacer on the outsides and press down into the cradle. Or, press the top of the spacer until you hear a click. (A)
Removing Spacers
Device Spacers: Put your finger inside and against the side of the spacer,
then lift the spacer out of the cradle. (B)
Battery Spacers: Remove the spacer by griping the spacer on the outsides and
lifting it up. (C)
Cradle Power Status LED
Green : Always on when the cradle is powered on
Charging Status LED
Green : Blinks 3 times then stays lit while the cradle is powered on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>