Weldclass Platinum LT40 LPG Burner Torch System User Guide
- June 9, 2024
- Weldclass
Table of Contents
Weldclass Platinum LT40 LPG Burner Torch System User Guide
PRODUCT INSTRUCTION
Up to 500mj/hr (475,000 BTU) output
Use with standard 4/9/45kg LPG bottle
Metal Heating & Weld Pre-heating
Weed Burning
Bitumen Heating & Concrete Curing
Water-Proofing, Drying & Thawing
Heat Shrinking/ Wrapping
All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.
COMBO KIT # WC-02991
The “all in one” kit with two tube lengths & two tip sizes. Gas regulator reduces operating pressure to ≤400kpa for reduced gas consumption, more controlled/ consistent gas flow & finer flame adjustment.
MAXFLAME KIT # WC-02989
Operates on full bottle pressure, with large tip for maximum heat output & flame size. typically 600-1400 kpa depending on ambient temperature
HANDY FLAME KIT # WC-02988
TORCH ONLY KIT # WC-02990
Technical Data
Technical Data|
---|---
Torch Length| With 400mm Tube| With 750mm Tube|
600mm| 1,000mm
Output| Set Up| With Regulator @ 400kpa| Without Regulator @ 800kpa
Maxflame|
Kit| Combo Kit| Handyflame| Maxflame
Tip Size| 50mm| 65mm| 50mm| 65mm
Heat / Energy Output| 185 Mj/hr| 390 Mj/hr| 390 Mj/hr| 500 Mj/hr
175,000 BTU| 370,000 BTU| 370,000 BTU| 475,000 BTU
Max Flame Length (mm)| 750mm| 1,000mm| 800mm| 1,200mm
Gas Consumption| 3.7 Kg/hr| 7.75 Kg/hr| 7.7 Kg/hr| 9.9 Kg/hr
Connections / Threads
| Regulator/Cylinder Adaptor Inlet| POL Fitting|
Regulator/Cylinder Adaptor Outlet| 5/8” UNF LH Male
Hose Fittings| 5/8” UNF LH Female
Torch Handle Inlet| 5/8” UNF LH Male
Torch Handle Outlet| M14x1 RH Male
Tube Inlet| M14x1 RH Female
Tube Outlet| M20x1 RH Male
Tip Inlet| M20x1 RH Female
Regulator Spec.| Output 0-400 kpa. 60mm diaphragm
Hose Spec.| 6mm I.D., max 2,000 kpa working pressure
Weight| Handle with 750mm tube & 65mm tip: 1.1kg
Materials / Construction| Handle Grip| Single-piece moulded polymer
Handle Body| Brass
Handle Lever| 2mm pressed steel, nickel-plated
Tube & Tips| Nickel-plated steel
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>