CYCPLUS CDZN888-C3 Bike Speed and Cadence Sensor User Guide
- June 6, 2024
- CYCPLUS
Table of Contents
CYCPLUS CDZN888-C3 Bike Speed and Cadence Sensor
Packing List
- Speed Cadence Sensor (Battery included)• 1
- Rubber band *2
- Curved rubber mat (For speed sensor) *1
- Flat rubber mat (For cadence sensor) *1
- User guide *1
Specifications
- Color : Black
- Size : 9.5mm x 29.5mm x 38.0mm
- Weight : 9.2g
- Battery : 220mAh CR2032
- Using time : : 600hours(Cadence) / 400hours(Speed)
- Standby lime : 300days
- Protection rating : IP67
- Available objects: Garmin\Wahoo\Zwift\Tacx\Bryton\XOSS\Blackbi rd etc.
- Protocol standard : The sensor can be connected to all kinds of APPs and devices which support Bluetooth or ANT+
Instructions for use
- Before using, please open the battery cover, and then remove the transparent insulation spacer.
- One sensor can not measure speed and cadence at the same time. If you need to measure them simultaneously, please purchase two sensors.
- For speed measurement, hub width must be more than 38mm.
- The product is used for cadence measurement by default. Bluetooth name is CYCPLUS C3 when used for cadence measurement. Bluetooth name is CYCPLUS S3 when used for speed measurement.
- When using the Bluetooth protocol, It can be connected to only one device or APP concurrently. Please disconnect the previous device or APP first when you want to change it.
- When using the ANT+ protocol,it can be connected to multiple devices at the same time.
- When using a smartphone APP, you need to search for the sensor. It’s invalid to search via the phone’s Bluetooth.
Function one: Speed measurement
- Open the battery back cover. Toggle switch to S position. Install the battery back cover.
- Fix the curved rubber mat on the bottom of the product and use a rubber band to fix the sensor on the hub.
- Tum the bicycle wheel to wake up the sensor and then connect it to a device or APP.
Function two: Cadence measurement.
- Open the battery back cover. Toggle switch to C position. Install the battery back cover.
- Fix the flat rubber mat on the bottom of the product and use a rubber band to fix the sensor on the crank.
- Tum the crank to wake up the sensor, and then connect it to a device or APP.
EUBRIDGE ADVISORY GMBH
Virginia Str. 2 35510 Butzbach,Germany
eubridge@outlook.com
TANMET INT’L BUSINESS LTD
9 Pantygralgwen Road, Pontyprldd, Mid Glamorgan, CF37 2RR,UK
tanmetbiz@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>