dji OSMO-AF-457 Action Multifunctional Charging Handle User Guide
- September 25, 2024
- DJi
Table of Contents
OSMO-AF-457 Action Multifunctional Charging Handle
“`html
Product Specifications
- Magnetic Ball-Joint Quick-Release Adapter Mount
- Status LED
- Shutter/Record Button
- Quick Switch Button
- Power Button
- C Button
- USB-C Connector
- USB-C Port Protective Cover
- 3.5mm TRS Microphone Input
- USB-C Charging Port
- Foldable Tripod
- 1/4 Thread Hole
- Lanyard Hole
- Charging Port Protector
Product Usage Instructions
Charging the Camera
Connect the camera to the charger via the USB-C port. Monitor
the status LEDs to determine the battery level during charging.
Charging the Charging Handle
1. Open the USB-C protective cover on the back of the
handle.
2. Connect the handle to the charger via the USB-C port.
3. The status LEDs will indicate the battery level during
charging, with all LEDs on when fully charged.
Microphone Connection
The product supports connecting to a 3.5mm three-stage
microphone through the 3.5mm TRS Mic input port on the back.
Warnings
Ensure to follow guidelines to extend the battery life and
maintain product performance.
Status LED
Press and hold the power button to check the battery level
indicated by the status LEDs. Different blinking patterns represent
various battery levels.
FAQ
Q: What should I do if all LEDs flash simultaneously?
A: If all LEDs flash at a frequency of 3 times per second, it
indicates a high-temperature or low-temperature environment. Wait
for normal temperature before use.
“`
Osmo Action Multifunctional Charging Handle
User Guide
v1.0 2024.09
This document is copyrighted by DJI with all rights reserved. Unless otherwise
authorized by DJI, you are not eligible to use or allow others to use the
document or any part of the document by reproducing, transferring or selling
the document. Only refer to this document and the content thereof as
instructions to operate DJI UAVs. The document should not be used for other
purposes.
Searching for Keywords Search for keywords such as “battery” and “install” to
find a topic. If you are using Adobe Acrobat Reader to read this document,
press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic View a complete list of topics in the table of contents.
Click on a topic to navigate to that section.
Printing this Document This document supports high resolution printing.
2 © 2024 DJI All Rights Reserved.
Contents
Osmo Action Multifunctional Charging Handle User Guide
1 Product Profile
4
1.1 Overview
4
1.2 Button Features
4
2 Using the Product
6
2.1 Charging the Camera
6
2.2 Charging the Charging Handle
8
2.3 Microphone Connection
8
2.4 Warnings
9
2.5 Status LED
9
3 Appendix
11
3.1 Updating Firmware
11
3.2 Specifications
11
3 © 2024 DJI All Rights Reserved.
Osmo Action Multifunctional Charging Handle User Guide
1 Product Profile
1.1 Overview
1
2
4
3
5
6
7
8 9
12
10
11
14
1. Magnetic Ball-Joint Quick-Release Adapter Mount
2. Status LED 3. Shutter/Record Button 4. Quick Switch Button 5. Power Button
6. C Button 7. USB-C Connector
12 13
8. USB-C Port Protective Cover 9. 3.5mm TRS Microphone Input 10. USB-C
Charging Port 11. Foldable Tripod 12. 1/4 Thread Hole 13. Lanyard Hole 14.
Charging Port Protector
1.2 Button Features
Power Button · Press and hold: Power on/off the charging handle.
4 © 2024 DJI All Rights Reserved.
Osmo Action Multifunctional Charging Handle User Guide Quick Switch Button
When the charging handle is connected to the camera, the following operations
can be performed: · Press and hold: Power off the camera. · Press once: Power
on the camera or switch between shooting
modes. Shutter/Record Button · Press once: Take a photo or start/stop
recording. When the
camera is in sleep mode, press once to start SnapShot. Note that the
shutter/record button can be used to control the camera only when the charging
handle is connected to the camera. C Button · Press once: Switch the front and
back touchscreen when using single screen preview.
5 © 2024 DJI All Rights Reserved.
Osmo Action Multifunctional Charging Handle User Guide
2 Using the Product
2.1 Charging the Camera
2 1
4 3
5
6 © 2024 DJI All Rights Reserved.
6
7
1s
Osmo Action Multifunctional Charging Handle User Guide
· The camera can only be charged after the charging handle is powered on. ·
The charging handle will automatically shut down within 1 minute when the
charging handle is not connected to the camera and is not being charged. ·
Press down on the camera until the clips of the magnetic ball-joint quick-
release
adapter mount are firmly inserted into the quick-release slots on the camera.
Connect the USB-C connector of the charging handle to the USB-C port of the
camera. · When detaching, remove the USB-C connector of the charging handle,
then gently press and remove the charging port protector as shown in the
diagram.
7 © 2024 DJI All Rights Reserved.
Osmo Action Multifunctional Charging Handle User Guide
2.2 Charging the Charging Handle
Open the USB-C protective cover on the back of the product, connect the
product to the charger via the USB-C port. The status LEDs will flash and
display the battery level during the charging process. Once the battery is
fully charged, all the status LEDs will be on.
2.3 Microphone Connection
The 3.5mm TRS Mic input port on the back of the product supports connecting to
a 3.5mm three stage microphone.
· Headphones with a 3.5mm plug are not supported. · Make sure that the
charging handle has power when connecting to a
microphone. 8 © 2024 DJI All Rights Reserved.
Osmo Action Multifunctional Charging Handle User Guide
2.4 Warnings
· The product is not waterproof. DO NOT place it in water. Use the charging
port protector, and make sure the USB-C port on the back of the product is
firmly closed.
· Make sure the battery handle is properly insulated to prevent fire hazards.
DO NOT drop or strike the product.
· If there is foreign matter inside the USB-C port, clean with an air blower
or soft brush. Note to sweep outwards from the inside of the port.
· DO NOT pull the coiled cable of the USB-C connector by force to avoid
damage. · Discharge the battery handle to 50% battery level if it is not used
for 10 days or
more in order to extend the battery life.
2.5 Status LED
Press and hold the power button to power on the charging handle and check the
current battery level from the status LED information.
The blinking patterns of the LEDs are as shown below: LED is on LED is
flashing LED is off
Blinking Pattern The charging handle is being charged
Battery Level
100% 76-99% 51-75%
© 2024 DJI All Rights Reserved.
9
Osmo Action Multifunctional Charging Handle User Guide
Blinking Pattern
Battery Level
31-50%
10-30%
The charging handle is charging the camera (while the charging handle is not being charged)
76-99%
51-75%
31-50%
10-30%
< 10%
When all LEDs flash simultaneously at a frequency of 3 times per second, the charging handle is currently in a high-temperature or low-temperature environment and cannot be used temporarily. Wait for the temperature to return to normal before use.
10 © 2024 DJI All Rights Reserved.
Osmo Action Multifunctional Charging Handle User Guide
3 Appendix
3.1 Updating Firmware
Connect the charging handle to the camera to update the firmware. The battery
handle will be automatically updated to the latest firmware version when there
is new firmware. During the updating process, all the status LEDs will flash
quickly. A prompt appears on the camera when the update is successful. DO NOT
unplug the charging handle from the camera during the updating process.
· If the update fails, restart the camera and charging handle, connect them
together, and try again.
3.2 Specifications
Model Campatible Action Camera
Compatible DJI Charger Voltage USB Input USB Output Operating Temperature
Charging Temperature
OSMO-AF-457 Supported DJI devices will be updated continuously. Visit the corresponding product page on DJI Store for a complete list. DJI 30W USB-C Charger / DJI 65W Portable Charger 3.6 V 3.6 V 5 V / 1.5 A -20° to 45° C (-4° to 113° F) 5° to 40° C (41° to 104° F)
11 © 2024 DJI All Rights Reserved.
DJI Support Contact DJI SUPPORT
This content is subject to change without prior notice. Download the latest
version from https://www.dji.com/osmo-action-5-pro/downloads If you have any
questions about this document, please contact DJI by sending a message to
DocSupport@dji.com.
DJI is a trademark of DJI. OSMO is a trademark of DJI OSMO. Copyright © 2024
DJI All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>