dji Dock 2 USB-C Power Adapter Instructions
- June 1, 2024
- DJi
Table of Contents
dji Dock 2 USB-C Power Adapter
Disclaimer
Carefully read this entire document and all safe and lawful practices provided before use.
Warnings
- DO NOT attempt to touch the metal terminals on the power adapter.
- Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
- The plug varies in different regions. Plugs for different regions are available for purchase on the DJI online store.
Introduction
With two USB-C output ports, the DJI USB-C Power Adapter (100W) can be used to charge compatible DJI aircrafts, remote controllers, Intelligent Flight Batteries,* and other mobile devices with a USB-C port.
- Support for DJI devices will be updated continuously. Visit the official DJI online store for more information.
Specifications
| Dimensions | 73.5×70×32 mm |
|---|---|
| Weight | 268±5 g |
| Input Voltage | 100-240 V AC, 50-60 Hz, 2.5 A |
| Output | Max. 100 W (Total) When both ports are in use, the maximum output of |
one of the ports is 82 W. The power adapter will dynamically allocate the
output of the two ports accordingly to the power load.*
Output Power| 100 W
Operating Temperature| 5° to 40° C (41° to 104° F)
- Devices will take longer to charge if both the Intelligent Flight Battery and remote controller or other devices are being charged simultaneously.
Compliance Information
FCC Compliance Statement
Supplier’s Declaration of Conformity
Product name: POWER ADAPTER
Model Number: CDX265-100
Responsible Party: DJI Research LLC
Responsible Party Address: 17301 Edwards Road, Cerritos, CA 90703
Website : www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ISED Compliance
CAN ICES-003 (B) / NMB-003(B)
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this
device (POWER ADAPTER) is in compliance with the essential requirements and
other relevant provisions of the Directive 2014/35/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com
/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this
device (POWER ADAPTER) is in compliance with the essential requirements and
other relevant provisions of Electrical Equipment (Safety) Regulations 2016.
A copy of the GB Declaration of Conformity is available online at www.dji.com
/euro-compliance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>