TREBLAB X-Open Wireless Headphone User Manual
- September 23, 2024
- TREBLAB
Table of Contents
- TREBLAB X-Open Wireless Headphone
- WHAT’S IN THE BOX
- BUTTONS AND PARTS
- Function Operation
- HOW TO ENSURE A PROPER FIT
- CHARGING
- SETTING UP YOUR TREBLAB X-Open
- PAIRING
- PHONE CALLS MANAGEMENT
- TROUBLESHOOTING
- BATTERY INFORMATION
- FCC STATEMENTS
- SPECIFICATIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TREBLAB X-Open Wireless Headphone
Thank you for choosing the TREBLAB X-Open!
Our earbuds provide superior sound quality and exceptional mobility thanks to
their light-weight construction and convenient hands-free wireless operation.
Before using this product, please read this manual.
WHAT’S IN THE BOX
- TREBLAB X-Open earphones
- Charging case
- TREBLAB logo sticker
- User’s manual & quick start guide
- Charging cable
- Cleaning brush
BUTTONS AND PARTS
Function Operation
HOW TO ENSURE A PROPER FIT
To get the best possible fit with your X-Open earbuds, put the earbuds onto your ears and twist the earphone bodies towards the earhooks until the earbuds are firmly secured. With a proper fit, you’ll notice more range when listening to music.
CHARGING
There are three things to keep in mind:
- The X-Open’s case is not compatible with 90W+ chargers.
- The X-Open model comes with protective stickers on the charging contacts of each earbud. Remove these stickers prior to charging the earbuds.
- After use and before charging, wipe the earbuds carefully to remove any moisture from the charging contacts.
To charge the case
You can check the current charging case battery level by looking at the
charging case battery indicator on the front of the charging case when putting
the earbuds to charge:
- <5% – Red LED flashes for 10 seconds;
- 6-33% – Red LED stays on for 10 seconds;
- 34-70% – Orange LED stays on for 10 seconds;
- 71-100% – Green LED stays on for 10 seconds.
We recommend charging the case when the battery level reaches about 10%.
To charge the case, connect one side of the supplied charging cable into the Type-C charging port (on the back of the case) and the other side into the power source or simply put the case onto the wireless charger. While charging, the LED battery indicator of the corresponding color (see above) will show the current battery level. Once fully charged, you will see the green LED flashing. It takes about 2 hours to fully charge the case using a wire or a wireless charger.
Be sure to use a 5V DC, 0.5 – 1A adapter or charger. Using a power source with lower power will increase the overall charge time.
To charge the earbuds with the charging case
When the earbuds’ battery is running low, you will hear the sound prompt
(similar to a busy tone).
Put the left and right earbuds into the slots in the charging case. The
earbuds will turn off automatically. The case will immediately start charging
the earbuds. You will see the white state indicators on the earbuds. When the
earbuds are fully charged, the white state indicator will go off. It takes
about 2 hours to charge the earbuds.
SETTING UP YOUR TREBLAB X-Open
To turn the earbuds on
- Take the earbuds out of the case, the earbuds will turn on automatically.
- Another option to turn them on is to touch the Touch panels of both earbuds and hold for 2 seconds. You will hear several sound prompts indicating that the earbuds are turnd on and ready for pairing. The white state indicator will light up on both earbuds and, a few seconds later, the state indicator will start flashing white on one of the earbuds.
- You will hear another sound prompt after connecting to the device.
To turn the earbuds off
- Put both earbuds into the slots in the charging case.
- Alternatively, touch the Touch panels of both earbuds and hold for 4 seconds when there is no media played. You will hear the sound prompt indicating that the earbuds are being turned off. The white state indicator will light up for 1 second and go off on both earbuds.
PAIRING
You can pair the X-Open earbuds with your device either together or separately. Using only one earbud at a time will help you to extend the overall playtime. Please read the instructions below to make the pairing process smooth and easy.
To pair both earbuds
- Take one earbud out from the charging case. The state indicator should start flashing white indicating that it is in the pairing mode.
- Activate the wireless communication function on your smart device, scan/search for TREBLAB X-Open, and click CONNECT.
- If prompted by your device to connect, select Yes.
- You will hear the sound prompt indicating that the earbuds are connected. The state indicator will start blinking white every 15 seconds.
AUDIO PLAYBACK
- To pause and resume the playback, double-touch either earbud’s Touch panel once.
- To change tracks on X-Open, triple-touch the right earbud’s Touch panel to play the next track and triple-touch the left earbud’s Touch panel to play the previous track.
- To adjust the volume, touch the right earbud’s Touch panel oce to increase the volume and touch the left earbud’s Touch panel once to decrease the volume.
PHONE CALLS MANAGEMENT
The TREBLAB X-Open can be used to make and receive calls when connected wireless. Audio playback will be paused during the calls.
GAMING MODE
TREBLAB X-Open earbuds support the gaming mode to reduce the audio latency up to 60ms. T his allows to achieve better video/audio synchronization and improve your gaming and video watching experience.
- To enable the gaming mode, touch the Touch panel four times on left earbud. You will hear the ascending sound prompt and feel the lower latency while gaming/ watching videos.
- To disable the gaming mode, touch the Touch panel four times on left earbud again. You will hear the descending sound prompt and the latency will go back to the standard 200ms.
NOTE In the gaming mode, the connection range is much shorter than in standard one, so, if you are experiencing some connection issues or drops, please make sure to disable the gaming mode.
VOICE ASSISTANTS SUPPORT
TREBLAB X-Open earphones are compatible with most of the voice assistants. To
use a voice assistant, touch either earbud’s Touch panel and hold for 1
second.
RESET TO THE FACTORY SETTINGS
You can reset the X-Open earbuds to the factory default settings by cleaning
up the pairing list with the last 6 connected to X-Open devices.
Make sure that the earbuds are disconnected from the source device. Tap five
times on both earbuds’ Touch panel.
The red state indicator will light up on both earbuds and the earbuds will
turn off automatically.
The earbuds’ memory is returned to the factory settings now.
CLEANING
It is recommended to clean the earbuds once every two weeks as dust can accumulate and clog the speaker protective screens located on the side and on the bottom of the earbuds.
To clean the earbuds, you will need three things:
- Eyelash brush or alike
- Alcohol
- Soak the eyelash brush (or alike) into the alcohol.
- Clean the protective screens on the side and bottom of the earbuds with forward and backward movement.
- Let the earbuds dry before repeated use.
TROUBLESHOOTING
SAFETY RULES
Never disassemble or modify your X-Open for any reason. Doing this may cause
the device to malfunction or even become combustible. The damage to your
device can void your manufacturer’s warranty.
Do not charge the earbuds when they are wet. Make sure todry off the earbuds
before charging.
Avoid exposing the TREBLAB X-Open to extreme temperatures (below 37F / 3C or
above 112°F / 45°C). Extreme temperatures can deform the components inside the
X-Open, reducing the battery life and the lifespan of your new earbuds.
Avoid putting the device’s LED lights close to the eyes of children or
animals.
Do not use your X-Open during a thunderstorm. Thunderstorms could cause them
to seriously malfunction and increase the risk of electric shock.
BATTERY INFORMATION
- Your device is powered by rechargeable batteries.
- Unplug the charging case from the electrical plug when not in use.
- If left unused, a fully charged battery will lose its charge over time.
- We recommend that you fully charge your earbuds twice a month to ensure the battery’s integrity.
- Please do not leave the device (and the charging case) in hot or cold places, such as inside a closed car in the summer or winter as this will reduce the capacity and life of the batteries.
- Do not expose the batteries to fire as they may explode.
- Batteries may also explode if damaged.
FCC STATEMENTS
FCC compllance Statement- Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference. and
- This device must accept any interference received, including interference that may cause undesired
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Interference Statement- Part 15
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna (s) must not be co-located or operation in conjunction with any other antenna or transmitter.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
RECYCLING
Your damaged or broken earphones can be recycled and we encourage you to do so
to keep our planet clean. Where can you go to do this?
In the US, there are a couple of options:
https://www.call2recycle.org
https://search.earth911.com
https://recyclenation.com/find
https://www.cta.tech/Consumer-Resourcesi’Greener-
Gadgets
In Canada, please visit the links below:
https://thin.kreuse.net
https://www.call2recycle.ca
In the UK, please visit the links below:
https://www.recycle-more.co.uk/
https://www.recyclenow.com/local-recycling
SPECIFICATIONS
-
Speaker unit: 014mm, 32n
-
Charging port: USB Type-C
-
Dimensions: Earbuds: 51.7 x 43.5 x 12.8 mm/ 2.03 X 1.71 X 0.5 in
Case: 80.5 x 54.0 x 25.0mm / 3.16 x 2.12 X 0.98 in -
Weight: Earbud: 8.9 g / 0.01 lb/ 0.31 oz
Case: 41.0 g / 0.09 lb/ 1.44 oz
THANK YOU
We truly appreciate that you chose TREBLAB as your trusted brand of wireless
earphones. Our team sincerely hopes that you enjoy the great sound and
seamless usability the TREBLAB X-Open provides.
We love making our customers happy by providing true value with our products.
If for any reason you are not completely satisfied with your purchase or have
any questions, please let us know by contacting us at
http://treblab.com/contact_us.
We care about our customers above all and are always here to serve you.
1 YEAR WARRANTY
Parts and Labor Warranty
Please visit www.treblab.com to register YOUR product.
Designed by Productech in the U.S.
Wireless Earbuds X -Open
WARNING: This product can expose you to Bisphenol A, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>