TREBLAB HD-FORCE Portable Wireless Speaker User Manual

TREBLAB HD-FORCE Portable Wireless Speaker

Thank you for choosing TREBLAB HD-Force! This speaker provides superior sound quality and portability, combined with entertaining features and the convenience of hands-free wireless operation.

WHAT’S IN THE BOX

1. TREBLAB HD-Force speaker
2. User’s manual
3. Round TREBLAB logo sticker
4. Type-C charging cable
5. 3.5mm audio cable

BUTTONS AND PARTS

SPEAKER FUNCTION

SETTING UP YOUR SPEAKER

Turn ON
Press and hold the POWER button for 2 seconds. You will hear the sound cue, the battery level indicators will light up, the multicolor LED light will start breathing white and the BLUE state indicator will start flashing.

Turn OFF
Press and hold the POWER button for 3 seconds. You will hear the sound cue and all the lights will go OFF.

WIRELESS PAIRING

Make sure TREBLAB HD-Force is fully charged.

1. Turn ON your speaker. You will see the BLUE state indicator flashing, meaning that the speaker is in pairing mode.
2. Activate the Bluetooth mode on the source device (smartphone, tablet, laptop).
3. Select TREBLAB HD-Force from the Bluetooth devices list. Keep the speaker within 3 feet/ 1 meter from the source device while pairing.
4. If prompted to connect by your device, select Yes.
5. If requested a passcode, enter 0000.
6. Once HD-Force is successfully paired and connected, the BLUE state indicator will stop flashing and stay BLUE.

RE-CONNECTING

After the initial pairing, the speaker will automatically connect to the previously paired device when turned ON again. If reconnection does not happen automatically, the speaker will start looking for any other previously paired device within the effective distance range. TREBLAB HD-Force can remember up to 6 recently paired devices.

NOTE : The speaker remembers the last mode it was in before it has been turned OFF. So, if the speaker is turned OFF in the SD card mode (considering that the MicroSD card is still in the speaker), after being turned back ON, it will automatically go back to the SD card mode.

TRUE WIRELESS STEREO (TWS)- PAIRING TWO SPEAKERS
The TWS technology allows you to use two speakers paired wirelessly to create a wireless dual-channel system, delivering a true stereo sound effect. While using this function, one speaker (Master, lelt channel) is paired with a source device, the other (Slave, right channel) speaker is paired with the Master speaker.

• Make sure that both speakers are turned ON, in Wireless mode and not connected to any source device.
• Double-press the POWER button on both speakers to enter the TWS mode. You will hear the sound prompt, and both speakers’ state indicators will start flashing BLUE and GREEN.
• Once the speakers are paired in TWS, you will hear the sound prompt and one of the speakers’ state indicator will start flashing BLUE slowly. This will be the Master speaker. The other speaker’s state indicator will turn BLUE. This will be the Slave speaker.
• Enable Bluetooth on the source device and select TREBLAB HD-Force from the Bluetooth devices list.
• If prompted to connect by your device, select Yes.
• If requested a passcode, enter 0000.
• Now you can use the speakers in stereo mode. Kindly note that the maximum distance between speakers should not exceed 33 feet/ 10 meters.

There are a few ways to disable the TWS function:

• When the speakers are connected to the source device, press the VOLUME+ and the VOLUME – buttons simultaneously for 3 seconds on the Master speaker the connection with the source device will interrupt, but the speakers will remain in the TWS mode. This way you can connect another source device.
• When the speakers are connected to the source device, press the VOLUME + and the VOLUME – buttons simultaneously for 3 seconds on the Slave speaker – the Master speaker remain connected to the source device, but the Slave speaker will disconnect and enter the pairing mode.
• When the speakers are NOT connected to the source device, press the VOLUME + and the VOLUME – buttons simultaneously for 3 seconds on either speaker – TWS connection between them will be interrupted.

NOTE:

1. When connected in TWS mode, the calling feature is available on the Master speaker only.
2. Once both speakers are turned back ON, they will try to reestablish the TWS connection. If you need to use the speakers separately, you need to factory reset at least one of them.

AUDIO PLAYBACK

To pause and resume playback when connected wirelessly, press the PLAY/ PAUSE button. To adjust the volume, press the VOLUME + or the VOLUME – button while listening to music.

To change the track on the HD-Force, press and hold the VOLUME + or the VOLUME – button for 2 seconds.

AUX MODE
You can connect TREBLAB HD-Force to compatible devices using the supplied 3.5mm AUX cable.

• Turn the speaker ON.

• Plug one end of the supplied 3.5mm AUX cable into the 3.5mm AUX cable port on the back of the speaker (under the rubber cover). Plug the other end into the
  3.5mm jack on your device.

• The state indicator will turn GREEN. Now you can play music and audio.

To mute the audio, press the PLAY/ PAUSE button.

NOTE: On-device control is not supported for the NEXT, PREVIOUS and PAUSE functions when using the 3.5mm AUX cable. Phone calls management using the PLAY / PAUSE button is not supported as well. You will need to make adjustments using your smart device.

SD CARD MODE

The TREBLAB HD-Force speaker can play music from the MicroSD cards up to 512GB. All you need to do is to copy music to the memory card (in folders or just to the card root), insert it into the MicroSD card slot on the back of the speaker (under the rubber cover). You will hear the sound prompt and the state indicator will turn green.
To start playing from the MicroSD card, press the PLAY/ PAUSE button. The playlist is arranged according to song addition date (the older tracks play first). The HD-Force speaker supports the following formats: MP2, MP3, WMA, APE, FLAC, AAC, MP4, M4A, WAV, AIF, AIFC; and the following file systems: FAT16, FAT32, exFAT, FAT64.

NOTE: When inserting the MicroSD card into the speaker, the card’s contact pad should be faced upwards.

PHONE CALLS

TREBLAB HD-Force can be used to make and receive phone calls when connected wirelessly. Audio playback will be paused during calls.

NOTE : For better call quality, face the microphone when you speak.

CHARGING

When the battery is running low, you will hear a sound signal. TREBLAB HD- Force may be used while charging in the Wireless, AUX and SD card modes. To charge the speaker, plug one end of the supplied cable into the TYPE-C charging port under the rubber cover on the back of the speaker. Plug the other end of the charging cable into a standard USB port. It takes up to 4-5 hours to fully charge. Once plugged in, the battery level indicators will start flashing slowly showing the current battery level (for more details, please check the BATTERY LEVEL INDICATION section). This means that the speaker is charging. When the speaker is fully charged, all tree battery level indicators will stop flashing and become steady. Be sure to use a 5V DC, 0.5-2A adaptor or charger. Using the power source with lower power will increase the overall charging time. Unplug HD-Force from the charging cable and the cable itself from the power source when not in use. If the speaker is left unused, even the fully charged battery will lose its charge over time. We recommend fully charging the HD-Force speaker at least twice a month to maintain sufficient battery life.

BATTERY LEVEL INDICATION

The HD-Force speaker is equipped with the battery level indicators – LEDs. The current charge level is displayed when the speaker is ON and when the speaker is used as a power bank in OFF state.

• Charge level is between 00/o and 300/o: one LED is ON (flashing during the speaker charging or in the power bank mode).
• Charge level is between 300/o and 700/o: two LEDs are ON (flashing during the speaker charging or in the power bank mode).
• Charge level is between 700/o and 1000/o: three LEDs are ON (flashing during the speaker charging or in the power bank mode).

POWER BANK MODE

TREBLAB HD-Force inbuilt battery can be used as a power bank to charge your smartphone or tablet.

1. Connect your device to the speaker by plugging your device’s charging cable into the USB 2.0 output port under the rubber cover on the back of the speaker.
2. If the speaker is in OFF state, press the POWER button to start charging. In case the speaker is ON, it will start charging instantly after you connect the device to the USB 2.0 output port.
3. There is no indication signal when the smart device is fully charged. Please pay attention to your device’s battery charge indicator during the charging time.

TROUBLESHOOTING

Frequent disconnection and noise
Ensure that nothing is blocking the signal between your device and the HD- Force. Check if the speaker is running out of power.

SPECIFICATIONS

• Battery : Input 5V/0.5A-2A Output 5V/2.1A
• Charging time : 4-5 hours
• Bluetooth version : 5.0
• Supported profiles : A2DP/AVRCP/I-IFP/I-ISP/OPP/1-1ID/SPP/PBAP/GA TT/SM
• Speaker size : 2 x 50mm , 1 x 80mm
• Output power : 50W
• Water resistance : IPX6
• Charging port : TYPE-C
• Audio port : 3.5mmjack
• MicroSD card file systems: FAT16, FAT32, exFAT, FAT64
• MicroSD card supported formats: MP2/MP3JWMA/APE/FLAC’AAOMP4/M4AIWAV/AIF/ AIFC
• Dimensions : 4.58 x 4.58 x 8.7 4 inches/ 116.5 x 116.5 x 222 mm
• Weight : 3.2 lbs/ 14559

RECYCLING

The speakers can be recycled, and they should be in order to keep our planet clean. Where should you bring them? In the US, there are a couple of options:

1. Best Buy has a recycling program. Just take the broken speaker with you next time you visit a Best Buy store.
   This link will help you find the best location: https://hvww.bestbuy.com/site /­store-locator/

2. Check for other possible locations next to you on these websites Gust enter your ZIP to find a location):

3. https://www.call2recycle.org

4. https://search.earth911.com

5. https://recyclenation.com/find

6. https://www.cta.tech/Consumer-Resources/Greener-Gadgets
   In Canada, please visit the links below:
   https://thinkreuse.net
   https://www.call2recycle.ca
   In the UK, please visit the links below :
   https://www.recycle-more.co.ul</
   https://www.recyclenow.com/local-recycling

THANK YOU We truly appreciate that you chose TREBLAB as your trusted brand of wireless speakers and sincerely hope you enjoy the great sound and seamless usability TREBLAB HD-Force provides. We love making our customers happy by providing true value with our products. If for any reason you are not completely satisfied with your purchase or have any questions, please visit https://treblab.corrv’contact_us. We care about our customers most of all and are always here to help you.

1 YEAR WARRANTY

Parts and Labor Warranty Please visit www.treblab.com to register YOUR product. Manufactured by Productech

WARNING : Cancer and Reproductive Harm – www.P65Warnings.ca.gov

PORTABLE WIRELESS SPEAKER

Documents / Resources

| TREBLAB HD-FORCE Portable Wireless Speaker [pdf] User Manual
HD-FORCE, HD-FORCE Portable Wireless Speaker, Portable Wireless Speaker, Wireless Speaker, Speaker
---|---
| TREBLAB HD-Force Portable Wireless Speaker [pdf] User Manual
HD-Force, HD-Force Portable Wireless Speaker, Portable Wireless Speaker, Wireless Speaker, Speaker

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>