TREBLAB UPD 2023 X3 Pro Wireless Earbuds User Guide
- June 14, 2024
- TREBLAB
Table of Contents
QUICK User Guide
UPD 2023 X3 Pro Wireless Earbuds
There are two things to keep in mind:
- The X3 Pro’s charging case is not compatible with MacBook chargers.
- The X3 Pro model comes with protective stickers on the charging contacts of each earbud. Remove these stickers prior to charging the earbuds.
- Before charging, wipe the earbuds carefully to remove any moisture from the charging contacts.
HOW TO PAIR
- Take the earbuds from the charging case. You will hear the “Power ON” voice prompt in both earbuds and, a few seconds later, the “Pairing” prompt will sound in the left earbud.
- Activate Bluetooth on the device, scan/ search for TREBLAB X3 Pro_L, and click CONNECT.
- If prompted by your device to connect, select Yes.
- You will hear the “Pairing successful” voice prompt in the left earbud and “Connected’l in both earbuds.
Power ON| Press and hold the MFB button on the left and right earbud for 2
seconds.
---|---
Power OFF| Press and hold the MFB button on the left and right earbud for 3
seconds.
Pause/Play| Press the MFB button on either earbud.
Previous track| Press and hold the Volume – button on either earbud for 1
second.
Next track| Press and hold the Volume + button on either earbud for 1 second.
Volume +| Press the Volume + button on either earbud.
Volume –| Press the Volume – button on either earbud.
Answer
a phone call| Press the MFB button on either earbud.
End a call| Press the MFB button on either earbud.
Reject a call| Press and hold the MFB button on either earbud for 1 second.
Voice assistant| Press the MFB button twice on either activation earbud while
connected to a smart device.