TAKSTAR DA12 Speech Microphone User Manual

TAKSTAR DA12 Speech Microphone User Manual

Preface

Dear Customer,
Thank you for purchasing Takstar DA12 Speech Microphone. To better understand and use the product, please read this manual thoroughly.
If you have any questions or suggestions, please contact our local dealer.

Features

• Integrated mic, amp and speaker for presentations anywhere.
• Crisp 12W peak power sound with 5-level volume control.
• Switch between speech, host, karaoke, wireless, TF modes easily.
• Feedback suppression via built-in DSP for clear sound quality.
• Rechargeable lithium battery provides 8 hours operation.
• Automated shutdown after 15 minutes inactivity.
• Records to TF card and plays audio files from it.
• Lightweight aluminum alloy casing for prolonged comfort.
• Ideal for public speaking, promotions, karaoke and outdoor events.

Applications

Public speaking, promotions, karaoke and outdoor events.

Package Contents

• 1 × DA12 Speech Mic
• 1 × Charging Cable
• 1 x User Manual
• 1 × Windscreen

Specifications

Voice Amp Specifications

• Frequency Response: 150Hz-12 kHz
• Peak Power: 12W
• Speaker Impedance: 40
• THD: THD<5% 1KHz@4R,4W
• S/N Ratio: 77dB (A-Weighted) @1W 40
• Main Chip: DSP
• Wireless Version: 5.0 or above
• Reverb Mode: Reverb
• Operating Voltage: 3.3V-4.2V
• Battery Type: Lithium-ion Battery (18650)
• Battery Capacity: 3.7V/2600mAh
• Charging Method: DC 5V/1.5A
• Charging Time: Approx. 2.5 hours
• Usage Time: Approx. 8 hours
• Product Weight: Approx. 290g
• Product Size: 68mm*253mm (Diameter Height)

Note: The above data are measured by Takstar laboratory which has the final interpretation right!

Mic Capsule Specifications

• Transducer: Back Electret Condenser
• Polar Pattern: Unidirectional
• Frequency Response: 60Hz-16kHz
• Sensitivity: -47±3dB (0dB=1V/Pa, at 1kHz)

Function Descriptions

1. Power Button : Press and hold for 2 seconds to turn the device on/off. Press to cycle through 5 working modes: Speech, Hosting, Karaoke, Wireless Playback, and TF Card. The device defaults to Speech mode upon powerup. Double click to activate TF card recording mode if TF card inserted, then click again to end recording and auto play recorded content. The device auto powers off after 15 minutes of inactivity.

2. Volume “+” Button: Press to increase volume (5 levels). Long-press in TF Card/Wireless Playback mode to switch to previous track.
   Volume “-” Button: Press to decrease volume (5 levels). Long-press in TF Card/Wireless Playback mode to switch to next track.

3. Indicator Light: Solid green when fully charged, solid red in low battery status. Flashes red while charging and turns solid green when fully charged.

4. Capsule: Keep the capsule approximately 3-5cm away. Avoid covering to prevent feedback.

5. Capsule: Keep the capsule approximately 3-5cm away. Avoid covering to prevent feedback.

6. TF Card Interface: Insert TF card with MP3 or WAV files. Format the card in FAT 16 or FAT32 format before copying audio files. Other formats such as exFAT or NTFS may not play or record properly.

7. Charging Port: Use Type-C charging cable to charge the mic.
   Tip: Fully charge before initial use. Avoid overcharging. Charge the device every six months if not used for a long time.

Operating Instructions

**I. Illustration of Grip

II. Wireless Playback Pairing**

1. Power on the device and switch to Wireless Playback mode by pressing the power button.
2. Enable wireless playback on your mobile phone and search for “TAKSTAR DA12” in the “Settings” menu.
3. Connect to “TAKSTAR DA12” and wait for the prompt sound to confirm successful connection.
4. Next time you switch to Wireless Playback mode, it will automatically reconnect to the last used device.
   Note: In Wireless Playback mode, the mic capsule is turned off and does not pick up sound.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:

1. Adjust the volume to proper level during operation, and do not place it close to human ears to prevent hearing damage.

2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local after-sales service for repair.

3. Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.

4. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.

5. Do not disassemble or repair the product by yourself to avoid injury.
   If you have any questions or require any services, please contact our local after-sales service.

6. Power adapters, if used, must comply with CCC certification and meet the power requirements of the device.

Label Meanings

This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

This device is compliant with the limits of the European Council Directive on the approximation of the laws of the member states relating to electromagnetic compatibility according to RL2004/108/EG and European Low Voltage Directive RL2006/95/EG.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help..

Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

About This Manual This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet. For the latest version/more information, please visit our website: https://www.takstar.com/
Copyright ©2024 TAKSTAR. TAKSTAR and their respective logos are registered trademarks or trademarks of Guangdong Takstar Electronic Co., Ltd. in the PRC, and/or other countries. All other trademarks are the property of their respective owners.

http://www.takstar.com/
Scan for more product information
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo
Huizhou, Guangdong 516121 China
Tel:  86 752 6383644  Fax:  86 752 6383952
Email:sales@takstar.com
Website:www.takstar.com
CMIIT ID: 2021DP2396
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>