SC T SDI01A-12G 12G-SDI to HDMI 2.0 Converter User Manual

SDI01A-12G 12G-SDI to HDMI 2.0 Converter
User Manual SDI Converter
Model : SDI01A-12G
12G-SDI to HDMI 2.0 Converter with Audio
Embedded/Extractor

Introduction

SDI01A-12G is a 12G-SDI to HDMI 2.0 converter that can allows you to monitor 12G SDI video using a cost-effective HDMI display. The new converter has a built-in SDI loop-out port to send the input SDI signal to an extra SDI device.
Furthermore, SDI01-12G also features diverse audio interfaces for audio embed or extract to integrate with your professional audio equipment.

Features

• Resolution up to 4K@60Hz 4:4:4 HDMI and 12G-SDI.
• Built-in fiber module for long distance transmission.
• Built-in SDI loop out.
• Built-in XLR (AES/ EBU), 6.3mm phone jack, and RCA audio interfaces
• Supports HDMI audio embedder and SDI audio extractor.
• Support HDMI video up/down scaler.

Diagram Step by step installation

1. Connect 12G-SDI source to SDI01A-12G by 12G RG6U cable (BELDEN 4694 or higher).
2. Connect 4K 6G HDMI monitor to SDI01A-12G by HDMI 2.0 premium cable.
3. Connect 12G-SDI monitor to SDI01A-12G by 12G RG6U cable (BELDEN 4694 or higher).
4. Connect AUDIO INPUT/OUTPUT between SDI01A-12G and audio equipment by XLR cable.
5. Connect DC 12V power adaptor to SDI01A-12G and turn on POWER switch.

Panel View

SDI Input
– Coax/Optical
SDI Loop out
– Coax/Optical
Audio Input
– SDI 8 Channel by Group selection
– 2 CH XLR / RCA / 6.5mm phone jack/ AES
Audio Output (simultaneously)
– HDMI
– 2 Channel XLR / 6.5 mm phone jack/ AES
Micro USB
– Firmware update
– System setting
– HDMI audio mapping
Mechanical Dip Switch
– Select audio interface
– Select HDMI resolution
– HDCP On / off
LED Indication

Front Panel LED

| Function| ON|

Blink

---|---|---|---
Green ON| Power| Power Good|
Green SIGNAL| SDI Signal Indicator| Signal Locked|
Green HDMI| HDMI Output Indicator| HDMI Outputted| Resolution not supported
Blue 12G/6G| 12G/6G Indicator| 12G-SDI| 6G-SDI
Blue 3G/1.5G| 3G/1.5G Indicator| 3G-SDI| 1.5G-SDI
Blue 270M| 270M Indicator| 270M-SDI|
Green XLR| XLR Input Indicator| XLR Input|
Blue AES| AES Input Indicator| AES Input|
Red MIC| Mic Input Indicator| Mic Input|

Rear Panel LED

| Function|

ON

---|---|---
Green READY| System Ready Indicator| System Ready
Blue SDI| Coaxial Indicator| Coaxial Input
Blue Optical| Optical Indicator| Optical Input
Green XLR| XLR Output Indicator| XLR Output
Blue AES| AES Output Indicator| AES Output

Dip Switch Settings

Default 4096x2160p@60Hz
7| Reserve| |
8| HDCP Setting| Without HDCP| With HDCP

※   Please adjust the DIP switch when power off then turn on to take effect.

Phantom Power Voltage Setting

Jumper No.

|

Phantom Voltage

---|---
JP5 Short| 48V
JP6 Short| 24V
JP7 Short| 18V (OEM Version)
JP5, JP6, JP7 All open| 12V

Supported Format

SDI Standard

SMPTE 2082-10 Mode 1| 12G-SDI
SMPTE 2081-10 Mode 2| 6G-SDI
SMPTE 425-1 3GA & 3GB| 3G-SDI
SMPTE 425-1 3GB-DS| 3G-SDI
SMPTE 292| 1.5G-SDI

SDI Resolution and Frame Rate

SDI Resolution

| SDI Frame Rate| SDI Sampling|

SDI Audio

---|---|---|---
4096×2160| 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p| 4:4:4/4:2:2| 32-CH 48KHz 24-Bit
3840×2160| 60p, 59.94p, 50p, 48p, 47.95p, 30p, 29.97p, 25p, 24p, 23.98p
2048×1080| 60p, 60i, 59.94p, 59.94i, 50p, 50i, 48p, 48i, 47.95p, 47.95i, 30p, 30psf, 29.97p, 29.97psf, 25p, 25psf, 24p, 24psf, 23.98p, 23.98psf
1920×1080| 60p, 60i, 59.94p, 59.94i, 50p, 50i,48p, 48i, 47.95p, 47.95i, 30p, 30psf, 29.97p, 29.97psf, 25p, 25psf, 24p, 24psf, 23.98p, 23.98psf
1280×720| 60p, 59.94p, 50p, 48p, 47.95p,30p, 29.97p, 25p, 24p, 23.98p

HDMI Resolution and Frame Rate

HDMI Resolution

| HDMI Frame Rate| HDMI Sampling|

HDMI Audio

---|---|---|---
4096×2160| 60p, 59.94p, 50p, 48p, 47.95p,30p, 29.97p, 25p, 24p, 23.98p| 4:4:4/4:2:2| 8-CH 48KHz 24-Bit
3840×2160| 60p, 59.94p, 50p, 48p, 47.95p,30p, 29.97p, 25p, 24p, 23.98p
2048×1080| 60p, 60i, 59.94p, 59.94i, 50p, 50i,48p, 48i, 47.95p, 47.95i, 30p,29.97p, 25p, 24p, 23.98p
1920×1080| 60p, 60i, 59.94p, 59.94i, 50p, 50i,48p, 48i, 47.95p, 47.95i, 30p,29.97p, 25p, 24p, 23.98p
1280×720| 60p, 59.94p, 50p, 48p, 47.95p,30p, 29.97p, 25p, 24p, 23.98p

Scaler Resolution and Frame Rate

The scaler doesn’t process the format of interlace and progressive segmented frame, it will directly pass-through original format from the input source.

**Trouble Shooting

**

1.  We strongly recommend using high quality 75Ω coaxial cables, bad quality of cable may affect the connection stability and transmission distance.
2. SD-SDI (480i & 576i) in the SMPTE 292 standard 270M is not supported.
3. Any change of HDCP settings must reboot to take effect.
   

Specification

Support
Compliance| SMPTE 2082-10 Mode 1 (12G-SDI)
SMPTE 2081-10 Mode 2 (6G-SDI) SMPTE 425-1 3GA & 3GB (3G-SDI) SMPTE 425-1 3GB- DS (3G-SDI) SMPTE 292 (1.5G-SDI)
HDMI 2.0
HDCP 2.2
Max. Video Resolution| 12G-SDI, 4096×2160@60Hz HDMI
Transmission Distance| 10KM over Single Mode Fiber Optic Cable, 100M over Coaxial Cable
Ports & Interfaces
Video Input| 1 x 75Ω BNC, 1 x Video SMPTE SFP+
Video Output| 1 x HDMI Type A
Video Loop-out| 1 x 75Ω BNC, 1 x Video SMPTE SFP+

Audio Interface

| 2 x XLR Male Jack
2 x XLR Female Combo 6.4 Jack 2 x 10KΩ RCA
Power Interface| 1 x (5.5 x 2.1mm) DC Jack
Firmware Update| 1 x Micro USB
Power
Power Supply| DC 12V Regulated
Power Consumption| 1.0A (Typical), 1.2A (Maximum)
Ambient Temperature
Operation| 0 to 50℃
Storage| -20 to 85℃
Humidity| Up to 95%
Physical Characteristics
Dimensions| 253 x 162.5 x 40mm
Weight| 1030g

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>