Ulanzi RX02-B Smartphone Camera Grip User Manual

RX02-B
User Manual
Smartphone Camera Grip

Product Introduction >>>

Product Structure Description:

Product Specification:

Power Bank Information:

12V 1.5A/9V 2A/5V 3A
USB-C Output| PD 20W Max
12V 1.5A/9V 2.22A/5V 3A(Max)
Wireless Charging| 15W Max
5W (5V 1A) / 7.5W (7.5V 1A)
10W(9V 1.12A) / 15W(9V 1.66A)

Function Description >>>

Connecting to Bluetooth Shutter
To connect Bluetooth shutter:
Long-press the shutter button for 3 seconds to turn on the Bluetooth function, the blinking blue light indicates pairing mode is active.
Turn on the Bluetooth pairing on your smartphone and select “Camera Grip RX” to pair.
The blue light stop blinking indicates successful pairing Click and shoot on your mobile phone by using the shutter button.

To turn off the Bluetooth:
Long-press the Bluetooth button for 3 seconds to turn off the function.
The blue light will blink quickly then shut down.
After 5 minutes without pressing the shutter button, the Bluetooth will turn off.

Charging the Camera Grip RX
Charging the Power Bank:
Connect to power supply through USB-C cable to charge, the LED screen will display the current energy percentage, and the single digits will blink slowly. It will display 100 when full charged.

Charging the Bluetooth Shutter:
Connect to power supply through USB-C cable to charge, a red light is on when charging, and will be off when full charged.

Note
Bluetooth remote control does not support charging through the mobile power supply, because most of the mobile power supply has a small current sleep mode, resulting in its sleep does not charge Bluetooth.

Smartphone with Magsafe Function
It can be magnetic sucked directly onto the device.

Smartphone without Magsafe Function
we need to paste an iron ring to the back of the phone or phone case, then magnetic suck it directly to the device.

Note
Please make sure the iron ring is correctly attached to the wireless charging area of the phone to obtain the best charging effect.

Note
We can rotate the phone 0-180° to get a better shooting angle.

Wireless Charging
Press the Charging Button and attach your smartphone onto the Grip RX securely.
Single-click the button to turn on the function, while double-click to turn off.
In the fast charge state, the green lightning bolt will be displayed.

Note
This function only works with smartphones that support wireless charging. Wireless charging may not work if you have a case that is too thick, or has a magnet or metal, or has built-in charging function. If so, please remove the phone case before charging.

USB-C Output Charging
It can charge other devices simultaneously by using USB-C cable.
Single-click the button to turn on the function, while double-click to turn off.
In the fast charge state, the green lightning bolt will be displayed.

※ Tips
Supports dual devices charging, Type-C charging + wireless charging at the same time, can meet different charging requirements.

Safety Instructions

1. Keep away from moisture and liquids, if the Grip RX has been exposed to liquids, dry immediately with dry cloth or tissue
2. Do not open, remove, crush, puncture, or short-circuit the Grip RX
3. Do not use if visible defects are observed on the Grip RX. Do not attempt to service or disassemble
4. Using the Grip RX for long periods of time will result in production of heat radiating from the device. It is a normal condition. If you believe your Grip RX may be overly heated, please turn off the device immediately.
5. Do not place it with inflammable and explosive materials
6. Children can use the device under the permission of their parents

RX01-B
User Manual
Smartphone Camera Grip

Thank you for purchasing and using this product

Product Introduction >>>
Product Structure Description:

Product Specification:

Power Bank Information:

12V 1.5A/9V 2A/5V 3A
USB-C Output| PD 20W Max
12V 1.5A/9V 2.22A/5V 3A(Max)
Wireless Charging| 15W Max
5W (5V 1A) / 7.5W (7.5V 1A)
10W(9V 1.12A) / 15W(9V 1.66A)

Function Description >>>

Connecting to Bluetooth Shutter
To connect Bluetooth shutter:
Long-press the shutter button for 3 seconds to turn on the Bluetooth function, the blinking blue light indicates pairing mode is active.
Turn on the Bluetooth pairing on your smartphone and select “Camera Grip RX” to pair.
The blue light stop blinking indicates successful pairing Click and shoot on your mobile phone by using the shutter button.

To turn off the Bluetooth:
Long-press the Bluetooth button for 3 seconds to turn off the function.
The blue light will blink quickly then shut down.
After 5 minutes without pressing the shutter button, the Bluetooth will turn off.

Charging the Camera Grip RX
Charging the Power Bank:
Connect to power supply through USB-C cable to charge, the LED screen will display the current energy percentage, and the single digits will blink slowly. It will display 100 when full charged.

Charging the Bluetooth Shutter:
Connect to power supply through USB-C cable to charge, a red light is on when charging, and will be off when full charged.

Note
Bluetooth remote control does not support charging through the mobile power supply, because most of the mobile power supply has a small current sleep mode, resulting in its sleep does not charge Bluetooth.

Fit the phone to Camera Grip RX
First step:
Align your smartphone to the center of the clamp, push down the lower arm with your smartphone to open up clamp.

Second step:
Push your smartphone into the top arm and release to secure.

Note
Ensure your smartphone is properly aligned to the center of the wireless charging plate for optimal charging capabilities.

Note
Both landscape mode and portrait mode are available by rotating the clamp.

Wireless Charging
Press the Charging Button and attach your smartphone onto the Grip RX securely.
Single-click the button to turn on the function, while double-click to turn off.
In the fast charge state, the green lightning bolt will be displayed.

Note
This function only works with smartphones that support wireless charging. Wireless charging may not work if you have a case that is too thick, or has a magnet or metal, or has built-in charging function. If so, please remove the phone case before charging.

USB-C Output Charging
It can charge other devices simultaneously by using USB-C cable.
Single-click the button to turn on the function, while double-click to turn off.
In the fast charge state, the green lightning bolt will be displayed.

※ Tips
Supports dual devices charging, Type-C charging + wireless charging at the same time, can meet different charging requirements.

Expandability
Cold Shoe Mount:
Slide the fill light into the cold shoe mount and adjust the angle to shoot
1/4″ Tripod Screw:
Fit the Grip RX into the tripod by screwing into the ½” copper nut on the bottom

Safety Instructions

1. Keep away from moisture and liquids, if the Grip RX has been exposed to liquids, dry immediately with dry cloth or tissue
2. Do not open, remove, crush, puncture, or short-circuit the Grip RX
3. Do not use if visible defects are observed on the Grip RX. Do not attempt to service or disassemble
4. Using the Grip RX for long periods of time will result in production of heat radiating from the device. It is a normal condition. If you believe your Grip RX may be overly heated, please turn off the device immediately.
5. Do not place it with inflammable and explosive materials
6. Children can use the device under the permission of their parents

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>