Ulanzi VL200 LED Light User Manual

VL200 LED LIGHT

Foreward

Thank you for purchasing the Ulanzi

Instructions

• Please read this product manual carefully.
• Keep this product manual. Always include this product manual when passing the products on to third parties.
• Heed all warnings and follow all instructions in this product manual.

WARNING

Do not place the product in a place where there are corrosive chemicals to protect the product from corrosion, corrosion may cause the product to malfunction.

• Use only a microfiber and dry cloth for cleaning the product.

• Operate carefully to not cause any damage by dropping or physically shocking it.

• Do not leave the product in excessive heat, high temperatures can cause the product to malfunction.

• Please have the product checked by the authorized service or agent if your product has some problems.
  Please note that this warranty does not apply to repair arising out of the malfunction of unauthorized disassembly, although you may request such repairs on a chargeable basis.

• Use of original VIJIM cable accessories is recommended.
  Please note that this warranty does not apply to repairs arising out of the malfunction of non-original VIJIM accessories, although you may request such repairs on a chargeable basis.

• The product is certificated by RoHS and CE. Please operate the product in full compliance with the operation standards.
  Please note that this warranty does not apply to repair arising from malfunction, although you may request such repairs on a chargeable basis.

• The instructions and information in this manual are based on thorough, controlled company testing procedures.
  Further notice will not be given if the design and specifications change.

Packing List :

Introduction

1. 1/4″ Thread
2. OLED Display Screen
3. Power
4. Mode Switcher
5. Illuminance Adjust Knob
6. Brightness Adjust Knob
7. Type-C Port
8. USB Output
9. 1/4″ Thread 011/4″ Thread

Menu Introduction

1. Estimate Work Time
2. Battery Capacity
3. Mode (CCT/HSI/Effect)
4. Temperature(CCT)
5. Brightness(CCT)
6. Hue(HSI)
7. Saturation(HSI)
8. Preset Effect Group
9. Preset Effect Name

CCT Mode

1. Turn brightness adjust knod to modify brightness(0-100%)
2. Toggle setting button to adjust temperature(3200K-5600K)

HSI Mode

1. Press the Setting button to switch H(Hue) and S(Saturation)
2. Toggle the setting button to adjust H(Hue) 0-360°
3. Toggle the setting button to adjust S(Saturation) 0-100
4. Turn the brightness knob to adjust the brightness to 1%-100%

Installation :

Charging Method

*Slight difference between Charging time and working time
1/4″ Thread
A 1/4″ Thread on base to install a light on tripods or another device.

Parameters :

Item Mode

| VL200| Tem nature|

3200-5600k±250k

---|---|---|---
LEDs| Yellow| 90pcs| Work Time| Max Output>2h

Min Output>15h

White| 90pcs
RGB| 96pcs| Power| 18W
Voltage| 3.7V| Size| 20012114.7mm
Battery Capacity| 10000mAh
Charge Port| Type-C| Beam Angle| 120°
Power Supply| DC 5V 2.6A|

*Brightness data is average and varies slightly from lamp to lamp.

contact us: service@ulanzi.com

Service Warranty

We offer a one-year product warranty. Under warranty For details and details, please visit our website www.ulanzi.com.

Important:
Keep your original sales receipt. Be sure the dealer has written on it the date, and serial No. of the product. This information is required for warranty service.

This warranty does not cover:

• Damage is the result of misuse, abuse, and accident (including but not limited to damage by water). faulty connection, defective or maladjusted associated equipment, or the use of the product with equipment for which it was not intended.
• Cosmetic defects that appear more than thirty (30) days after the date of purchase.
• Cosmetic damage caused by improper handling is also excluded.
• Damage occurs while the product is being shipped to whoever will service it.

This warranty is void if:

• The product identification or serial No. label is removed or defaced in any way.
• The product is serviced or repaired by anyone other than Ulanzi or an authorized Ulanzi dealer or service agency.

Ulanzi GUARANTEE CARD

Serial No.|
---|---
Item Name|
Purchase Date|
Buyer Name|
Buyer Phone|
Buyer Add|
Franchiser Seal|

Shenzhen Ulanzi Technology Co., Ltd.
Ulanzi international Group
Building B, Ruixiangfa Industrial Park,
Shangxue Tech Park, Jihua Road,
Bantian Street, Longgang District,
Shenzhen, Guangdong, China
www.ulanzi.com Designed by Ulanzi
Assembled in China/Patented Product
RoHS Shenzhen VIJIM Technology Co., Ltd.
Inspection: Qualified

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>