Ulanzi AY6C RGB Stick Tube Light Handheld LED Light User Manual

USER MANUAL

INTRODUCTION

Thank you for purchasing our product!
photography fill light

• CRI≤95 TLCI≥97.
• LED full-color video light wand, about 280 mm long and 38 mm in tube diameter(high: 42.9 width: 42.5 mm), is short and portable.
• The OLED display screen is adopted for digital dimming, and free adjustment on the app is supported as well.
• Magnets at both ends enable the light wand to be adsorbed on iron surfaces. And it also can be used handheld or mounted on a bracket.
• The lithium battery of the light wand has a capacity of 7.4V 2600mAh, which is available be charged via the Type-C interface.
• There are switchable CCT color temperature modes, HSI mode, RGB color mode, and 10 scene effects.
• It allows coarse or fine adjustment of color temperature, hue, brightness, and saturation.
• Built-in professional LED driver chip enables shooting without visible flickering. And it is suitable for creative shooting, live streaming, camping photography, selfies, still
• life photography, video shooting, etc.

WARNING

1. Please keep the product dry. Do not touch it with wet hands, and do not immerse it in water or expose it to rain.
2. Do not use the product in high temperatures or closed spaces under direct sunlight.
3. There is a built-in lithium battery, so do not disassemble, impact, squeeze the product or throw it into the fire. Please strictly follow the corresponding operating rules, otherwise, it may cause an explosion or fire.
4. Unplug the power cable when charging is completed.
5. Please charge the product when it is not used for a long time.
6. The product has a built-in lithium battery, and its battery life will be shortened after use for a period, which is normal.

PART NAME

1. 1/4 ” Screw Hole
2. LED Lamp Beads
3. PC transparent tube
4. OLED Display Screen
5. Multi-Function Knob Short Press to Set Parameters Long Press to Adjust Values
6. Power Switch
7. Mode Setting Button (Short press) Coarse or Fine Adjustment Button (Long press)
8. Type-C Interface
9. Rubber Pad
10. 1/4 ” Screw Hole

USE

1. Power ON/OFF
   Long press the [ ] button to turn on the power, and the LED lights up and displays the current battery level and working mode. Long press the button again to turn off the power.

2. Set the Working Mode
   Short press the [ ] button to set working mode, and cycle through CCT mode, HSI mode, RGB mode, and SCENE mode.
   Note
   Once turned on, the OLED display shows the memorized parameters of the previous use and the light wand works based on these parameters.

3. Set Coarse or Fine Adjustment
   Long press the [ ] button to set coarse or fine adjustment. Select F (Fine) to enter fine adjustment, and the unit of color temperature adjustment is 100K, while other parameters are 1%. Select C (Coarse) to enter coarse adjustment, and the unit of color temperature adjustment is 500K, while other parameters are 5%.

4. CCT Mode
   Short press the multi-function knob to set brightness and color temperature respectively, then rotate the knob to adjust the brightness from 0% to 100% or color temperature from 2500K to 8500K.

5. HSI Mode
   Short press the multi-function knob to set hue, brightness, and saturation respectively, then rotate to adjust hue (H) from 0 to 1530, brightness( ) from 0% to 100%, and saturation(S) from 0% to 100%.
   

6. RGB Mode
   Short press the multi-function knob to set R/G/B color from 0 to 255 respectively, and get different colors by adjusting the above-mentioned parameters. There are up to 16 million combinations of colors in RGB mode.
   

7. SCENE Mode
   Support 10 kinds of scene effects. Short press the multi-function knob to switch the effect and rotate the button to adjust brightness.

8. Restore the Default Setting
   Long press the multi-function knob for 7 seconds to restore the default setting (CCT mode, color temperature 5500K, brightness 0%).

9. About Battery Icon
   The battery icon makes up of four cells and each one represents about 25% of the power, and it gradually decreases during use. When the last cell is exhausted, the battery icon will flash. After about 5 minutes, the light wand will automatically turn off. Please charge it in time.

10. USB Charging
    Adopt the Type-C interface for charging the light wand. Connect Type-C to a USB cable with a USB adaptor(sold separately) to charge the light wand.

11. Auto-Save Function
    When the light wand is turned off, it automatically saves the current working mode and parameter values. And when it is turned on again, it will work in the mode and parameter values set last time.

12. Three-Sided Magnetic Adsorption
    The top and bottom of the light wand and both ends of the side where its control panel is located are equipped with magnets, and magnetic adsorption enables the light wand to be placed on the desk, wall corner, table corner, and other places for use.

13. Use the RGB Link App
    You can download the app from the iOS App Store or scan the QR code below to get the app.

https://rgb-link.com/software/app/

SPECIFICATION

Name| photography fill light| Size| 280x 038mm(11.02 x 1.5in) (high: 42.9mm/Width: 42.5mm) (1.69 x 1.67in)
---|---|---|---
CRI| Ra: >95| TLCI| Qa: >97
CCT Color Temperature| 2500-8500K(±100K)| Number of Lamp Beads| 69pcs (24pcs of warm white light + 24pcs of cold white light +21pcs of RGB)
RGB Hue (HSI)| 0-1530 Full Color| RGB Combination| Support up to 16 million combinations of colors
Scene Mode| Support 10 kinds of scene effects| Brightness Adjustment| 0-100%
Power| 8W| Built-in Lithium Battery| Built-in
Battery Duration| Aprox.100 min at 100% brightness| Charging Interface| Type-C
---|---|---|---
Charging Power| 5V2A| Fixed Interface| 1/4 ” Screw Hole x 2
Display| OLED screen| Material| PC and ABS material
Weight| Approx. 278g(9.81oz )|
Illumination at 100% Power

Lamp Beads/ Distance| 0.3m| 0.5m| lm| Lumen
Warm White Light| 2590Lux| 840Lux| 213Lux| 618.9LM
Cold White Light| 2970Lux| 974Lux| 245Lux| 747.4LM
R (Red light)| 826Lux| 237Lux| 63.2Lux| 142.5LM
G (Green light)| 2180Lux| 689Lux| 172Lux| 491.2LM
B (Blue light)| 655Lux| 210Lux| 52.2Lux| 107.8LM

Note：
The specifications of this product are tested according to the samples from the company’s laboratory. The finished product possibly has a slight difference, which will not affect regular use. Design and specifications are subject to change without prior notice.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance May invalidate the user’s authority to operate the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
This can be determined by turning the device off and on, and users are encouraged to try to correct the disturbance by one or more of the following:

• Reposition or reposition the receiving antenna.
• Increase the distance between the device and the receiver.
• Connect the device to an outlet on a different circuit The one connected from the receiver.
• Consult the dealer or an experienced radio/TV technician for help. This device has been evaluated for compliance with general RF exposure requirements. The device can be used in portable exposure conditions without restriction

FCC ID: 2A5T8-AY6C

Documents / Resources

| Ulanzi AY6C RGB Stick Tube Light Handheld LED Light [pdf] User Manual
AY6C, 2A5T8-AY6C, 2A5T8AY6C, AY6C RGB Stick Tube Light Handheld LED Light, AY6C, RGB Stick Tube Light Handheld LED Light, Tube Light Handheld LED Light, Handheld LED Light, LED Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>