Ulanzi AP007C2 Wireless Microphone User Manual

Ulanzi AP007C2 Wireless Microphone

Wireless microphone

Preface

Dear users.

Thank you for purchasing a wireless camera microphone, in order to better understand the use of this product, We recommend that you read this manual carefully before using Read this manual carefully.

Product Features

• Lavalier style wear, compact and portable body.
• 2.4G wireless transmission technology, stable transmission signal, effective distance of 100 meters.
• Real-time monitoring, with three monitoring volume levels freely switchable.
• Noise reduction algorithm pickup, three noise reduction modes and the freedom to switch off noise reduction, to meet the precise pickup in any complex environment.
• Support TF card local audio storage, no fear of audio file data loss, making the interview more secure.
• Microphone can be used as a recorder alone, any environment at any time, anywhere recording synchronized preservation.
• Microphone can support continuous interviews for a hours of ultra-long life, no longer bothered by the battery life.
• Equipped with charging case, more convenient for microphone and receiver charging.
• Charging case large battery 1 S00mAh rechargeable cycle, travel and tourism live interviews preferred.

Scope of application

• Specialized in live broadcast, VLOG, camera, interview, etc.

Packing list

Charging case(Two mic version)· – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – • 1 PCS
Microphone • – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – • 2PCS
Receiver• – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – • 1 PCS
Double-sided headphone cable• – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – . 1 PCS
Charging cable· – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – · 1 PCS
Wind muff· – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – · 2PCS
Instruction manual· – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – · 1 PCS

Technical Parameters

Charging case parameters

Input voltage : DC4.8~5.4V
Charging time : about 120 minutes
Weight : about 105g
Battery capacity: 1500mAh
Recharging times: 2 times
Slze : 72. 7 4 ’98. 72’31 .22mm

Microphone parameters

Sampling rate : 48KHz
Delay time : 25ms
Frequency response range : 20-20KHz
Input voltage : DC4.8-5.4V
Sensitivity : -38 dBFS
Signal-to-noise ratio : 64dB
Frequency range : 2.4GHz
Battery capacity : 230mAh
Working time : 8 hours
Charging time : about 90 minutes
Weight : about 14.5g
Size :50.48’21.55’21 .76mm

Receiver parameters

Frequency range : 2.4GHz
Delay time: 25ms
Frequency response range: 20-20KHz
Weight : about 6.3g
Input voltage : DC4.8-5.4V
Size : 45.5*27.4·10.8mm

Function schematic

1. Charging case indicator
2. Charging case Type-C charging interface
3. Microphone indicator *2
4. Microphone switch/ mute key *2
5. Microphone reset button *2
6. TF memory card slot *2
7. Receiver end indicator
8. Receiver 3.5mm monitor interface
9. Noise reduction level/volume cycle key
10. Power on/ reset key
11. Receiver Type-C
    

Function schematic

1. If the mobile phone has OTG function, please manually turn on OTG
   Step 1 : Open the phone “Settings”
   
   Step 2: Enter “OTG” to search
   
   Step 3 : Open “OTG Connection”
   

2. Some models of OPPO may need to set up manually as below: Settings>Sound & vibration> Other settings>Default recorder>Add on

Microphone function description

1. Open the cover to turn on Green light for is
2. Click the power button once

| Green light for 1 S
2| Power off|

1. Put in the charging case to close the lid
2. Press the power button 5s

| light off
3| Search pairing| no connection object| Green light slow flash
4| Paired successfully| connected successfully| Blue light is always on (no TF card)
Green light is always on (with TF card)
5| Clear pairing/restore factory settings| Three clicks power button within 10s| Blue and Green light flash alternately
6| Mute/ pickup| Click power button to switch the mute I pickup| Green light flashing
7| Charging| Put in the charging case and close the cover| Charging: Red light on

Fully charged: red light off

Fully charged: red light off
8| Low battery| Lower than 3.2V (auto shutdown within 15 mins)| Red light slow flashing
9| Automatic shutdown| Lower than 3.0V shutdown or no connection state for more than 15 minutes| light off
10| TF Card auto recording mode| Enter TF card recording mode once connected| Green light is always on
11| Recorder function (no receiver connection)| Click power button to switch to start or stop recording (TF card automatically save)| Recording:
blue light flashes fast Stop recording: green light flashes slow
12| TF card fail to record| Can not record TF card| Red light flashing

Receiver function description

always on
5| clear pairing / restore factory| Settings within 1O s after power on three clicks on the button| Red and green lights alternately flash
6| Receiver mute| Mute Click on the power on button| Red light is always on
7| Monitor volume level switch| Short click “+ .” key| Three levels in turn cycle
Tones in order:
“drop” (level 1)
“drop drop” {level 2)
“drop drop drop· (level 3)
The indicator light is:
Red light flashes once (level 1) Red light flashes twice 9level 2) Red light flashes three times (level 3)
8| Noise reduction level switch| Double Click:”+ • “key| Three levels In turn cycle and turn off the noise reduction
Tones in order:
“Beep· (level 1)
“Beep Beep· (level 2)
“Beep Beep Beep” 9level 3)
The indicator light Is:
Green light flashes once 9level 1) Green light flashes twice (level 2) Green light flashes three times {level 3)

Charging case function description

always on
Full: red light off
2| Charging case indicator| Open the lid/indicator: 100%-75°/o| Green light for 1Os
Open the lid/indicator: 74%-36%| Blue light on for 1Os
Open lid/indicator: 35%-13%| Red light flashing
Open the lid/indicator: 13% or less| Red light flashes 5 times
3| Into the warehouse/ out of the warehouse detection| Microphone into / out of the charging case| Blue and green lights on 2 times each
4| Microphone charging| Microphone into the charging case and close the lid| Blue and green lights on 2 times each

Note:

1. TF card recording automatically save a new recording file each time, when the memory card content full, automatically delete the earliest time recording file.
2. TF card recording time zone factory default Beijing time, such as the use of this product in different time zones need to connect to a computer to calibrate the time.

Cell phone connection instructions

Plug the Type-c receiver into the Type-c interface device of the cell phone, the green light of the receiver is always on, you can use the microphone radio.

Headset connection instructions

After inserting the receiver into the phone, then insert the bilateral 3.5mm monitoring headphones equipped with real-time monitoring.

Hair cover installation instructions

The hair sleeve plastic buckle position aligned with the transmitter notch, insert and then rotate clockwise 90° to fix.

About the icon meaning explanation

 According to RL2004/108/EG and European Low Voltage Directive (European Low Voltage Directive)The test results of RL2006/95/EG show that this product complies with the limit values specified in the EC Directive on the integration of Member States’ legislation on electromagnetic compatibility.

 Comply with the requirements of the FCC rules section 15. Operation is subject to the following two conditions:

1. This equipment may not cause harmful interference;
2. This device must accept any interference received, including interference that may cause unintended operation.

 This symbol indicates that, in accordance with the WEEE Directive (2012/19/EU) and national legislation, this product should not be disposed of with your household waste as this type of waste can be potentially harmful and may have a negative impact on the environment and human health, and should be disposed of at an authorized electrical and electronic equipment (WEEE) recycling site. At the same time, your proper disposal of this product will contribute to the efficient use of natural resources. For more information on where you can place your waste recycling equipment, please contact your local city office, waste authority or household waste service.

Safety Warning

In order to avoid electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use of the product may cause personal injury or property damage, please read carefully and comply with the following matters before using this product:

1. When using the product, please confirm that the connected equipment and the product power match and reasonable adjustment of the volume of the equipment do not exceed the product power and loud volume for a long time, so as not to cause abnormalities in the product
2. If abnormalities are found in use (such as smoke, odor, etc.), please immediately turn off the power switch and turn off the power plug and then send the product to the dealer for repair
3. This product and accessories should be placed in a dry and ventilated place indoors, do not store for a long time in a humid, dusty environment avoid near fire, rain, water, excessive collision, throwing, vibration of the machine and cover the ventilation hole to avoid damage to its function.
4. The use of the product must comply with the relevant safety regulations, laws and regulations clearly prohibit the use of the occasion please do not use the product, so as not to cause accidents
5. Please do not disassemble and modify or repair the machine by yourself to prevent personal injury, if you have questions or service needs, please contact your local dealer to follow up.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause handful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause handful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF waning for Portable device The device has been evaluated to meet general RF exposure requirement device cat he used in portable exposer condition  without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>