Ulanzi Wireless Microphone User Manual

October 27, 2023
Ulanzi

Ulanzi Wireless Microphone

Ulanzi-Wireless-Microphone-product

Preface

Dear user
Thank you for purchasing a wireless camera microphone, in order to better understand the use of hie product, We recommend that you read this manual carefuly before using Read this manual carefully

Product Features

  • Lavaler styfe wear, oompact and porlable body.
  • 2.4G wirekss transmission technobgy, stable transmission signal, effective distance of 100 metes.
  • Real-ime moritoring, with three monitoring vokma laes frecly swichabla.
  • Noise reduction algorithm pickup. three noise reduction modes and the freedom to swinch off  noise reduction, to meet the precise pickup in any compkx environment.
  • Support TF card kocal audio storage, no tear of audio fle data ss, making he interiew more secure.
  • Micraphona can be usod as a reoordor alone, any envircnment at any time, arywhere rocording synchranizod preservabon.
  • Micraphone can suppot continuous interviews for B hours of utra4ong Ife, no langer bothered by the bamary lfe.
  • Equipped with charging case, more convenient for microphone and recever charging.
  • Charging case large battery 1500mAh rechargeable cycle, travel and tourism lve intervicws prefemredd

Scope of application

  • Specializ9d in ive broadcast, VLO3, camera, interviow, etc.

Packing list

  • Charging case Two mic version
    • 1PCS
  • Microphone
    • 2PCS
  • Receiver
    • 1PCSS
  • Double-sided heacphone cable.
    • 1PCS
  • Charging cabla
    • IPCS
  • Wind muff
    • 2PCS
  • Instruction manual
    • 1PCS

Technical Parameters

Charging case parameters

  • Input voltage:.DC48-5.4V
    • Balttery capacity:1500mA
  • Charging time: about 120 minutes
    • Recharging times: 2 times
  • Weight:about 105g
    • Size:72.74’98.7231 22mm

Microphone perameters

  • Sempling rate:48KHe
    • Frequency range:2.4d
  • Delay time:25ms
    • Battery capacity 230mAh
  • Frequency response range: 20-20KHz
    • Working time:8 hours
  • hput voltage:DC4.8-54V
    • Charging time:about 90 minutes
  • Sensitivity:-38 dBFS
    • Weightabout 14.5g
  • Signato-noise raio:64dB
    • Size:50.48 21.55 21.76mm

Receiver parameters

  • Froquency range:2.4GHz
    • Weight:about 6.39
  • Delay time:25ms
    • Input vofage DC4.8-5.4V
  • Frequency respanse range:20-20KHz
    • Size:45.527A”10.8mm

Function schematic

  1. Charging case indicator
  2. Charging case Type-C charging intertface
  3. Microphone indicator 2
  4. Microphone switch / muta kay 2
  5. Microphone reset buttorn 2
  6. Receiver end indicator
  7. Receiver 3.5mm manitor interface
  8. Noise reduotion levelvolume cycle key
  9. Pawer on/reset koy
  10. Receiver Type-C

Function schematic

  • It e mobile phone has OTG Aunction, plaase manually tum on OTG
    • Step 1:Open the phone “Setings
    • Step2 Enter 0TG”to search
    • Shep 3: Open ‘OTG Connection
  • Soma modals of OPpO may naad to sot up manually as babw: Sottings>Sound & vbrationOther satings>Dataut rooordorsAdd on

Microphone function description

Receiver function description

Charging case function description

Note

  1. TF card recording automatically save a nevw recording file each time, when the memory card content full, automatically delete the earliest time recording file.
  2. TF card recording time zone factory default Beijing time, such as the use of this product in different time zones need to connect to a computer to calibrate the time.

Cell phone connection instructions

Plug the Type-c receiver into the Type-c interface device of the cell phone, the green light of the receiver is always on, you can use the microphone radio.

Headset connection instructions

After inserting the recelver into the phone, then insert the bilateral 3.5mm monitoring headphones equipped with real-time monitoring.

Hair cover installation instructions

The hair sleeve plastic buckle position aligned with the transmitter notch, insert and then rotate clockwise 90 to fix.

About the icon meaning explanation

According to RL2004/108/EG and European Low Voltage Directive (European Low Voltage Directive)The test results of RL2006/95/EG show that this product complies with the limit values specified in the EC Directive on the integration of Member States’ legislation on
electromagnetic compatibility.
Comply with the requirements of the FCC rules section 15. Operation is subject to the following two conditions:

  1. This equipment may not cause harmful interference;
  2. This device must accept any interference received, including interference that may cause unintended operation.
    This symbol indicates that, in accordance with the WEEE Directive (2012/19/EU) and national legislation, this product should not be disposed of with your household waste as this type of waste can be potentially harmful and may have a negative impact on the environment and human health, and should be disposed of at an authorized electrical and electronic equipment (WEEE) recycling site, At the same time, your proper disposal of this product will contribute to the efficient use of natural resources. For more information on where you can place your waste recycling equipment, please contact your local city office, waste authority or household waste service

Safety Warning

In order to avoid electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use of the product may cause personal injury or property damage, please read carefully and comply with the following matters before using this product:

  1. When using the product. please confim that the connected equipment and the product power match and reasonable adjustment of the volume of the equipment do not exceed the product power and loud volume fora long time, so as not to cause abnormalities in the product
  2. If abnormalities are found in use (such as smoke, odor, etc.), please immediately turn off the power switch and turn off the power plug and then send the product to the dealer for repair
  3. This product and accessories should be placed in a dry and ventilated place indoors, do not store for a long time in a humid, dusty environment avoid near fire, rain, water, excessive collision, throwing, vibration of the machine and cover the ventilation hole to avoid damage to its function
  4. The use of the product must comply with the relevant safety regulations, laws and regulations clearly prohibit the use of the occasion please do not use the product, so as not to cause accidents
  5. Please do not disassemble and modify or repair the machine by yourself to prevent personal injury. if you have questions or service needs, please contact your local dealer to follow up.

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.
If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

  • * Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance Ocm between the radiator and your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals