WyreStorm EX-100-USB3 100m USB 3.2 HDBaseT Extender with PoH User Guide

: September 19, 2024
: WyreStorm

Table of Contents

EX-100-USB3 100m USB 3.2 HDBaseT Extender with PoH
Specifications
Product Usage Instructions
Installation Requirements
Wiring and Connections
Troubleshooting
- FAQ
Q: What type of cable should I use for installation?
Q: How can I verify if the unit is powered on?
Q: What should I do if there is no link with the receiving

EX-100-USB3 100m USB 3.2 HDBaseT Extender with PoH

“`html

Specifications

Inputs: TX: 1x USB Host, RX: 4x USB 3.2 Type A, 1x RJ45
Input
Outputs: TX: 1x RJ45 Female, USB 3.2 Gen 1
Supported Standards: USB 3.2
Power Supply: DC 20V 3A with locking connector
Max. Power Consumption: 39.79W (USB fully-loaded), 6.94W (No
USB load)
Environmental: Operating Temperature, Storage Temperature
Dimensions and Weight: Height – 20.5mm/0.8in, Width –
150mm/5.9in, Depth – 100mm/3.93in
Regulatory: CE, FCC, RoHS, RCM, EAC, UKCA

Product Usage Instructions

Installation Requirements

Ensure you have all the components included in the box before
starting the installation process.

Wiring and Connections

Run and terminate all wiring before making connections to the
switcher. Use T568B straight-through category cable, preferably Cat
6A/7 (F/FTP or U/FTP) for a transmission range of up to
100m/330ft.

Troubleshooting

If experiencing issues, use a cable tester or connect the cable
to other devices to verify functionality.

FAQ

Q: What type of cable should I use for installation?

A: WyreStorm recommends using T568B straight-through category
cable, specifically Cat 6A/7 (F/FTP or U/FTP) for optimal
performance.

Q: How can I verify if the unit is powered on?

A: The Power LED will be solid when the unit is powered on and
off when it is powered off.

Q: What should I do if there is no link with the receiving

device?

A: Check the connections and ensure proper wiring as per the
instructions provided. If the issue persists, contact support for
assistance.

“`

100m USB 3.2 HDBaseT Extender with PoH+
EX-100-USB3

Quickstart Guide

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation process.

IMPORTANT! Installation Requirements
· Read through the Wiring and Connections section for important wiring guidelines before creating or choosing premade cables.
· Visit the product pages to download the latest firmware, document version, additional documentation, and configuration tools.

In the Box
1x EX-100-USB3 1x DC 20V 3A Power Supply (US/EU/UK/AU) 1x 1.8m USB 3.0 Type-A to Type-B Cable (5Gb) 4x Mounting Bracket 1x Quickstart Guide (this document)

Basic Wiring Diagram

1 of 4

INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com

EX-100-USB3 (Front)

EX-100-USB3 (Rear)

Power LED Link LED USB LED DC 20V
E USB Host F Link LED G USB3 Link H USB LED I Update Port

E

FGH I

Solid: The unit is powered On Off: The unit is powered Off
On: Indicates link with receiving device Off: No link with receiver/powered off
On: USB data transmission Off: No USB data transmission
Connect to the 20V power adapter
USB 3.0 Type B female Connection of USB Host device
On: Indicates link with receiving device Off: No link with receiver/powered off
Connect to the receiver for USB transmission
On: USB data transmission Off: No USB data transmission
Micro USB for firmware upadtes

Power LED USB Device DC 20V Link LED
E USB3 Link F USB LED

EF
Solid: The unit is powered On Off: The unit is powered Off USB 1 Type A female Connection of USB peripherals
Connect to the 20V power adapter
On: Indicates link with receiving device Off: No link with receiver/powered off Connect to the receiver for USB transmission On: USB data transmission Off: No USB data transmission

2 of 4

INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com

Wiring and Connections
WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its entirety before running or terminating any wires to ensure proper operation and to avoid damaging the equipment.

IMPORTANT! Wiring Guidelines · The use of patch panels, wall plates, cable transmitters, kinks in cables,
and electrical or environmental interference will have an adverse effect on signal transmission which may limit performance. Steps should be taken to minimize or remove these factors completely during installation for best results.

· WyreStorm recommends using pre-terminated USB cables due to the complexity of these connector types. Using pre-terminated cables will ensure that these connections are accurate and will not interfere with the performance of the product.

Transmission Distance
T568B straight-through category cable is recommended. Please use F/FTP or U/FTP cable, and DO NOT use UTP, F/UTP, or U/UTP cables.

Cable Type Cat 6A/7 (F/FTP or U/FTP) Cable

Range 100m/330ft

Troubleshooting
No Link, or USB Device is not Recognized. · Verify that the USB inputs and RJ45 output connections are not loose and
are functioning property. · Make sure you are using full featured USB cables made by reliable brands. · Please use cat6A U/FTP or F/FTP cables.

Troubleshooting Tips: WyreStorm recommends using a cable tester or connecting the cable to other devices to verify functionality.

3 of 4

INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com

Specifications
Audio and Video
Inputs
Outputs Supported Standards Power Power Supply
Max. Power Consumption
Environmental Operating Temperature Storage Temperature Dimensions and Weight Height Width Depth Regulatory Safety and Emission

TX: 1x USB Host RX: 4x USB 3.2 Type A1 x RJ45 Input TX: 1x RJ45 Female USB 3.2 Gen 1
DC 20V 3A with locking connector 39.79W (USB fully-loaded) 6.94W (No USB load)
0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing
20.5mm/0.8in 150mm/5.9in 100mm/3.93in
CE | FCC | RoHS | RCM | EAC | UKCA

Note: WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice.
Warranty Information WyreStorm Technologies ProAV Corporation warrants that its products to be free from defects in material and workmanship under normal use for a period of five (5) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our limited product warranty.

4 of 4

INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) support@wyrestorm.com