Saunalife G7, G7S Saunum Outdoor Sauna Installation Guide
- September 18, 2024
- saunalife
Table of Contents
Saunalife G7, G7S Saunum Outdoor Sauna
Product Information
Specifications
- Product Model: Garden-Series Model G7 & G7S
- Product Type: Outdoor Sauna
- Manufacturer: SaunaLife
- Recommended Maintenance: Once a year for outdoor cladding; Once a year for interior cladding, sauna bench, and floor grid if used twice a week
Product Usage Instructions
Installation Requirements
The base or foundation for the sauna must be leveled and stable, at least 3
inches higher from the surrounding ground. Use concrete blocks or strips with
compressed gravel underneath. Consider using geotextile to prevent grass and
weed growth. The sauna can also beplaced on a terrace or pavement, ensuring it
is still higher than the surface.
Transport
The sauna can be lifted from above or below for transportation.
Final Assembly
Client is responsible for organizing the final assembly, which includes
installing parapet metals to avoid weather damage and baseboards for
decorative purposes. A rainwater system must be installed if the sauna is
exposed to rainwater.
Maintenance
Perform maintenance of the outdoor cladding annually. If the sauna is used
twice a week, oil the interior cladding, sauna bench, and floor grid once a
year.
Important Safety Requirements
Ensure the sauna door is closed during heating to prevent overheating.
FAQ
Q: How often should I oil the interior cladding, sauna bench, and floor
grid?
A: If the sauna is used twice a week, these components should be oiled once
a year.
INSTALLATION
The base or foundation for the Sauna must be leveled and stable. The sauna must be at least 3 inches higher from the surrounding ground. All base beams must have a support under them.
Recommendation:
We recommend placing the Sauna on concrete blocks or strips that have
compressed gravel underneath. Using geotextile under the Sauna prevents the
growth of grass and weeds. It is also possible to place the Sauna on a terrace
or pavement, but the Sauna should still be higher than the surface.
TRANSPORT
The sauna can be lifted from above:
Sauna can be lifted from below:
FINAL ASSEMBLY
The final assembly shall be organized by the client. Final assembly includes installing the:
- Parapet metal
- Decorative base boards
- Outdoor lights 240V (for Sauna 1 and Sauna 2)
- Heater (+ control unit)
- Rainwater system
- Cables (North American saunas)
- Electrical cabinet (North America saunas)
- Ventilation device 240V (North America saunas)
Final Assembly Instructions
Parapet metals must be installed to avoid weather damage to the sauna:
Baseboards are for decorative purposes and are easy to install. A rainwater system must be installed when the sauna is exposed to rainwater.
MAINTENANCE
Maintenance of the outdoor cladding should be done once a year. If the sauna is used twice a week, then the interior cladding, sauna bench, and floor grid should be oiled once a year.
IMPORTANT SAFETY REQUIREMENTS
The sauna door must be closed during heating to avoid overheating!
site:saunalife.com
email:info@saunalife.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>