KASTA ISLS20A1P Weatherproof Isolators Installation Guide
- September 17, 2024
- KASTA
Table of Contents
ISLS20A1P Weatherproof Isolators
“`html
Specifications:
-
Product Code: ISLS20A1P, ISLS35A1P, ISLS63A1P, ISLS20A3P,
ISLS35A3P, ISLS63A3P -
Supply: 220-240V AC 50Hz
-
Rated Voltage: 500V
-
Rated Impulse withstand voltage suitable for isolation:
4KV -
Rated Duty: Uninterrupted Duty
-
Rated Short-time withstand current and duration: 1.2kA/1s
-
Rated Short-Circuit Making Capacity: 2kA
-
Dimensions:
- 51mm x 87.5mm x 71.5mm
- 25mm Cut Out
- 82.5mm x 100mm x 126mm x 167mm x 173mm
- 25mm Cut Out
Product Usage Instructions:
Installation:
-
Ensure the power supply is switched off before
installation. -
Mount the Weatherproof Isolator securely in a suitable
location. -
Follow the connection diagram provided in the manual for
correct wiring. -
Verify all connections before turning on the power supply.
Safety Information:
Read all safety information provided in the manual carefully
before installation or use. Ensure all safety precautions are
followed to prevent accidents or electric shocks.
Maintenance:
Regularly inspect the isolator for any signs of damage or wear.
Replace if any issues are detected to maintain safe operation.
FAQ:
Q: Can the Weatherproof Isolator be used outdoors?
A: Yes, the Weatherproof Isolator is designed to withstand
outdoor conditions.
Q: What is the rated impulse withstand voltage?
A: The rated impulse withstand voltage suitable for isolation is
4KV.
Q: How should I connect the Weatherproof Isolator?
A: Follow the connection diagram provided in the manual for
correct wiring instructions.
“`
Installation Instructions
Weatherproof Isolators
Product Code: ISLS20A1P ISLS35A1P ISLS63A1P ISLS20A3P ISLS35A3P ISLS63A3P
FEATURES
· High ingress protection – IP66 rated · Pad lockable in off position for
added protection (suits 6mm shackle) · UV stabilised to avoid discolouring ·
Multiple mounting facilities · Switches mounted on base for stability ·
Terminals suit 4 x 2.5mm2 cable · Earth and Neutral cables secured reliably
with two screws on both line and load sides · Colour coded terminals for ease
of identification · Entries: 4 x 25mm threaded. 2 x 25mm entry on rear · 2 x
Plain Reducer 25/20 included · Covers secured and removed with two fast-action
retention screws · 5 year warranty
TECHNICAL SPECIFICATIONS
Operating Temp: -20ºc to 85ºc
Supply: 220-240V AC 50Hz
Rated Voltage: 500V
Rated Impulse withstand voltage suitable for isolation: 4KV
Rated Duty: Uninterrupted Duty
Rated Short-time withstand current and duration: 1.2kA/1s
Rated Short-Circuit Making Capacity: 2kA
DIMENSIONS
51mm
87.5mm 71.5mm
25mm CUT OUT
82.5mm
100mm 126mm 167mm 173mm
25mm CUT OUT
Important Safety Information
·This product must be installed by a licensed electrician in accordance with
all the requirements of AS/NZS 3000 (current edition) and other relevant
Standards and Regulations. ·Electricity MUST be disconnected prior to
installation. Failure to do so may result in serious injury and or loss of
life. ·Complies to Australian Standards AS 60947.3:2023 with AS/NZS
60947.1:2021 (IEC 60947-3:2020 (Ed.4.0) MOD with IEC 60947.1:2020 (Ed. 6.0)
MOD ·No user serviceable parts inside
CONNECTION DIAGRAM
· After the base is fixed, please fit the caps over screw holes to ensure
waterproof rating · Weatherproof sealant needs to be used on cable entrance
holes used at the top of the Isolator
ver 1.4
kasta.com.au | (02) 9168 5900
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>