MEAN WELL DDRH-60 series Din Rail Type Dc-Dc Converter Installation Guide

: September 16, 2024
: MEAN WELL

Table of Contents

MEAN WELL DDRH-60 series Din Rail Type Dc-Dc Converter
Features
Applications
Description
Model Encoding
SPECIFICATION
Block Diagram
Derating Curve
Static Characteristics
DC OK Relay Contact
Mechanical Specification
External FUSE wiring instruction
Installation Instruction
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEAN WELL DDRH-60 series Din Rail Type Dc-Dc Converter

Features

150~ 1500Vdc 10:1 ultra – wide input range
57mm slim width
4KVac 1/0 high isolation(Reinforced isolation)
Protections: Short circuit / Overload / Over voltage / Over temperature DC input under voltage / DC input reverse polarity
Fanless design, cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
-30~+80°C ultra-wide operating temperature (> +55°C derating)
Overvoltage category Il
Operating altitude up to 5000 meters
DC OK relay contact
DC output voltage adjustable(+20%)
Fully encapsulated
3 years warranty

Applications

Photovoltaic power generation
Renewable energy system
High voltage freqency conversion
Industrial control system
Semiconductor fabrication equipment
Electro-mechanical apparatus
DC bus centralized application
Energy storage system(ESS)
Charging pile
Third rail

GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

DDRH-60 series is a 150 ~ 1500Vdc high reliable ultra-high input DIN rail type DC-DC converter that can supply stable working voltage for the load. It is suitable to be mounted on TS-35/7.5 or TS-35/15 rails. The main features are as follows: easy-to-install DIN rail type, narrow width(57mm) in a slim design, -30~+80° C wide range operating temperature, 4KVAC high isolation voltage, operation at 5000m altitude, high efficiency, low ripple & noise, complete protections and so on. DDRH-60 is compliant with UL1741 and BS EN/EN61000-6-2 standards regarding immunity for industrial environments. It is suitable for industrial automation, surveillance, and telecommunication and can be widely deployed in the applications of new energy generation such as solar power, windmill power generation, for instances, photovoltaic power systems, high voltage inverting, DC bus centralized applications,s and so forth.

Model Encoding

MEAN-WELL-DDRH-60-series-Din-Rail-Type-Dc-Dc-Converter-
FIG-2

SPECIFICATION

MODEL	DDRH-60-5	DDRH-60-12	DDRH-60-24	DDRH-60-48

OUTPUT

| DC VOLTAGE| 5V| 12V| 24V| 48V
RATED CURRENT| 10A| 5A| 2.5A| 1.25A
CURRENT RANGE| 0 ~ 10A| 0 ~ 5A| 0 ~ 2.5A| 0 ~ 1.25A
RATED POWER| 50W| 60W| 60W| 60W
RIPPLE & NOISE (max.) **Note.2| 100mVp-p| 120mVp-p| 150mVp-p| 200mVp-p
VOLTAGE ADJ. RANGE| 5 ~ 6V| 12 ~ 15V| 24 ~ 29V| 48 ~ 54V
VOLTAGE TOLERANCE Note.3| ±1.5%| ±1.5%| ±1.0%| ±1.0%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±1.5%| ±0.5%| ±0.5%| ±0.5%
EXTERNAL CAPACITANCE LOAD (Max.)**| 6000μF| 4000μF| 2500μF| 1000μF

INPUT

| VOLTAGE RANGE Note.4| 150 ~ 1500Vdc

EFFICIENCY (Typ.)

| 200Vdc| 80%| 83%| 86%| 87%
800Vdc| 81%| 85%| 87%| 88%
1500Vdc| 76%| 81%| 84%| 83%
INRUSH CURRENT (max.)| COLD START 120A /1500Vdc 80A/800Vdc 30A/150Vdc

PROTECTION

| ****

OVERLOAD

| 105 ~ 135% rated output power
Protection type : Hiccup up mode when output voltage<55%, recovers automatically after condition is removed;

Constant current limiting, recovers automatically after fault condition is removed within 55% ~ 100% rated output voltage

OVER VOLTAGE

| 6.6 ~ 8.4V| 16.5 ~ 21V| 30 ~ 38V| 55 ~ 60V
Protection type : Hiccup up mode, recovers automatically after fault condition is removed
OVER TEMPERATURE| Protection type : Hiccup up mode, recovers automatically after fault condition is removed

DC INPUT

| REVERSE POLARITY| By internal Bridge Diode, no damage, recovers automatically after fault condition removed
UNDER VOLTAGE LOCKOUT| Under voltage protection range:120 ~ 130Vdc , Under voltage release range:130 ~ 146.5Vdc
FUNCTION| DC OK SIGNAL| Relay contact rating(max.) : 30V / 1A resistive

ENVIRONMENT

| WORKING TEMP.| -30 ~ +80℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 55℃)
VIBRATION| Component: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6
OPERATING ALTITUDE Note.5| 5000 meters /OVCⅡ
OVER VOLTAGE CATEGORY| Ⅱ; According to EN62109-1; altitude up to 5000 meters

SAFETY & EMC

(Note.7)

| SAFETY STANDARDS| UL1741, CSA C22.2 No.107.1-16 , IEC62109-1(LVD) , EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:4KVAC O/P-DC OK:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, 100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

EMC IMMUNITY

Voltage Dips and interruptions

| ****

BS EN/EN61000-4-11

| ＞95% dip 0.5 periods, 30% dip 25 periods,

＞95% interruptions 250 periods

OTHERS

| MTBF| 454.5K hrs min. MIL-HDBK-217F (25℃); 1439.7K hrs min. Telcordia TR/SR-332 (Bellcore) (25℃)
DIMENSION| 5793.5105mm (WHD)
PACKING| 0.8Kg; 16pcs/12.8Kg/0.84CUFT

NOTE

| 1. All parameters NOT specially mentioned are measured at 600Vdc input, rated load, and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation, and load regulation.

4. Derating may be needed under low input voltage. Please check the derating curve for more details.

5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitudes higher than 2000m(6500ft).

6. Installation clearances: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended.

7. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )

※ Product Liability Disclaimer： For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx