Shenzhen Inphic Electronics FC1 Wireless Earbuds User Manual

FC1
Wireless Earbuds

It is prohibited to use fast charge, flash charge, car charger, fast charge power bank, computer, etc. to charge in the charging compartment, otherwise, it may cause a fire. Must use 3C certified 5V/1A regular charging head to charge the charging compartment

Package Contents:

ANC Wireless Earbuds 120 ANC Wireless Earbuds Silicon earbuds*2 pairs User manual
Button icon:

1. Earphone dust-proof net
2. Touch control
3. Indicator light/MIC
4. Headphone charging port
5. Charging room indicator light
6. Manual charging switch
7. Charging port of charging compartment

Description of Indicator status:

1. The red light flashes means the charging compartment is charged separately, and a constant red light means the battery is full.
2. When the earphone is in the charging state but the charging compartment is not – the red light of the earphone is always on, and the green light of the charging compartment is always on. When fully charged, the headset and charging compartment are both off.
3. When the earphone and charging compartment are both in the charging state – the red light of the earphone is always on and the red light of the charging compartment is flashing. The headset turns off when fully charged, and the red light of the charging compartment is always on.
4. When the headset is in low battery, the red light flashes slowly to prompt charging;
5. The flashing green light in the charging compartment indicates that the charging compartment has insufficient power and needs to be charged.

Bluetooth pairing:
Open the cover of the charging case, the left and right buds will automatically pair, and the earbuds will enter the waiting state for pairing with your device.
First time pairing(same for IOS & Android):
Turn on the Bluetooth of the phone, take out the two earbuds and wait for pairing, click “116” in the Bluetooth option in the settings of your device. After the pairing is successful, you are ready to go! After first-time pairing, every time you take the buds out of the case and wear them, they’ll connect with your device automatically.
IOS pairing:

Operate instructions: the headset is connected normally.
Left ear: Touch 1 time to play/pause/answer the call/hang up, touch 2 times to increase volume, touch 3 times to next song, long press3 seconds to call the voice assistant
Right ear: Touch 1 time to play /pause/answer the call/ hang up, touch 2 times to decrease volume, touch 3 times to the previous song, long press 3 seconds to call the voice assistant.
*Note: If received the headset with the left and right ear opposite functions, please try to taps 2 times the neck of the headset to change both ears function before it connects to your phone. taps 3 times to switch between Chinese and English prompts. (Due to compatibility issues, some android phones do not support volume control) Calling the voice assistant requires that the mobile phone has installed a voice assistant APP that can be opened, such as Siri of 10S, Android mobile assistant, etc.
The 116 headset supports AAC high-definition audio codec. Some mobile phones may not be compatible when AAC is turned on. There is no sound when playing music, please set the Bluetooth audio codec of your phone to SBC or Turn off AAC (different mobile phones and different models of mobile phones may have different setting methods, the specific setting methods Please consult the phone manufacturer)
Shut down and use again:
When not using the headset, please put the headset into the charging case and press the charging button to charge the headset. For the second use, just take out the headset from the charging case to automatically match, and automatically connect to your phone. You can also manually press and hold the headset touch area for 4-5 seconds to shut down. Press both ears when using again. (Touch the area for more than 3 seconds until the indicator light flashes)
Tip:

1. Never dismantle or refit the product to avoid malfunction or fire hazards;
2. Keep away from corrosive liquids to avoid damages to the product;
3. Since the Bluetooth signal cannot be transmitted under ter, swimming, diving will cause the signal to be disconnected or intermittent;
4.  After the earphones are placed in the charging compartment, the bottom of the charging compartment flashes green or does not light up and the manual charging switch does not light up. This is a reminder that the charging compartment is out of power. Please charge the charging compartment in time. At this time, the functions of automatically turning on the earphones out and automatically turning off when putting the earphones in are invalid, and you need to touch the switch manually;
5. During use, if one of the headphones has no sound, keeps disconnecting, automatically turns on, or fails to Turn on the headset, it may be that the headset is out of power. At this time, you need to put it back in the charging compartment before you can continue to use it. Please remember to press the charging switch button when charging the mobile charging model;
6. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe;

CARE-FREE WARRANTY
If there is any defect or fault caused by defective material or workmanship of our product within 12 months from the date of purchase, and such defect or fault is notified by the Customer to the Company as soon as practicable, and upon the Company’s technician determining that such defect or fault is due to defective material or workmanship, then the Company agrees to replace such defective or faulty part(s) free of charge. No need to return the initial one, please email us for the guarantee service.
We’d Love to Hear From You!
Thank you for your recent purchase of our Inphic product. We hope you will be satisfied with both the product and service you received. If not, please give our helpful customer services team an opportunity to improve your experience right away. We are more than happy to help. Meanwhile, we also welcome you to post a Product Review so that others can benefit from your experience. We sincerely appreciate your time and input. To submit your review, please follow the steps below:

1. Log into your account on Amazon.com, click “Your Account” and then click “Your Orders”.
2. Click on the specific lithic product you purchased, and select the “Create your own review” button in the middle of the page.
3. Now post an informative review or even shoot a video to help it be more visible. We’re always looking for ways to improve, so thanks again for your business, support and feedback.

Warmest regards,
Inphic Customer Support Team

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
[email protected]
www.inphic.com
IN PIC ELECTRONICS CO., LTD.
Address: 24/F, Jinhua Building, Longfeng 3rd Road,
Dalang Street, Longhua District, Shenzhen, Guangdong, China
Executive standard: Q/YFK 011-2020 Zip code:518110
Business Name: Prolinx GmbH (E-Mail: [email protected])
Business address:Brehmstr.56, 40239 Dusseldorf Deutschland

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>