INFICON How To Use IRwin App User Guide
- June 9, 2024
- INFICON
Table of Contents
INFICON How To Use IRwin App
How To Use IRwin App
With IRwin App you will be able to
- Get Function test on a PDF report
- Get Calibration test on a PDF report
- Get logged survey on a PDF report
- Open files, download files & delete files from IRwin
- Optimize your GPS setting (Landfill and City Environment)
How To Use IRwin App
Start and Connect
- Start IRwin and connect to the computer via Bluetooth
- Start IRwin App
- Select Connection followed by Device
- Select your IRwin serial number in the menu and press Connect
How To View Log files from IRwin
Select a file under the menu Files and press View to see the logged data from the file in IRwin App
Download a file from IRwin
- Select a file in IRwin App under the menu Files ****
- Select Download file and save it on the computer
Visualize a file in a map
- Select Map and press Import File
- Select a log file from your computer
- Select prefered map from the five choices
Open a log file from the computer in IRwin App
- Open a log file from the computer in IRwin App
- Select a file from your computer (Only CSV files can be uploaded into IRwin app)
Display different leak sizes on the map
- Select Set Filter in the menu
- Enter the value of the desired leak size at each color markings and press save.
See also the Tech Note ”Setting the correct speed limit in IRwin App” at bottom of this document.
Export files to PDF
- Follow the steps described under ”Visualize a file in a map” on page 3
- Under the menu Map, press Create Report
- Insert your company’s logo or enter a comment in the PDF file, if so wished. Press Save to create the report
- Your report has been generated
GPS settings for Normal Walk or Slow Walk*
-
Go to the menu Settings and choose Device GPS
-
Mark the GPS setting that fits your survey best (Normal Walk or Slow Walk) and press save
Normal walk is recommended for city environment whereas Slow walk is recommended for landfill
TECHNICAL NOTE
IRwin Methane Leak Detector – Setting the correct Speed Limit in IRwin
App 4.02
The IRwin APP Software for the methane leak detector IRwin allows operators to
visualize their survey digitally on a laptop and create PDF’s of the work.
Operators can walk or drive the survey route.
In the new IRwin app 4.02, the filter function added under the menu “Map” allows users to indicate whether the survey was undertaken on foot or with a vehicle based system by simply setting the maximum speed between points. This will improve the way the route is displayed in the map (PDF report).
For best results, we recommend to set the max speed to 7 km/h when walking,
and to 100 km/h when performing the survey by car.
See images below for how to set the speed filter and the recommended settings.
- Survey on foot: set the maximum speed to 7 km/h
- Survey with vehicle based system: set maximum speed to 100km/h
Gustaf Andersson,
2022-05-04
www.inficon.com
reach.sweden@inficon.com
Due to our continuing program of product improvements, specifications are
subject to change without notice.
All trademarks are the property of their respective owners.
©2022 INFICON miu66en1-1 (2205)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>