SEURA 10.5 10-Inch Vanity TV Mirror User Manual

Vanity TV Mirror
TV SIZES 10-INCH, 19-INCH, 27-INCH
MODEL NUMBERS
10.5, 19.5, 27.5
USER MANUAL

10.5 10-Inch Vanity TV Mirror

Thank you for selecting a Séura Television Mirror.
This product has been inspected and packaged carefully before shipment.
Please read this guide before beginning installation.
Please keep this manual for future reference.
Information in this manual is subject to change without prior notice.
FCC Information
This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation. If this equipment causes unacceptable interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced Radio/TV technician for additional help.
WARNINGS
To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your Television Mirror. The socket outlet should be installed near the equipment and be easily accessible. The TV should be connected to a grounded GFCI- protected main socket outlet.
WARNING: If you manipulate against the recommended usage, serious injury or death to the user may result.
To protect against electric shock, do not immerse the power cord, power plug, or product in water or other liquid.
Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
Close adult supervision is necessary when any product is used by or near children.
Do not operate any product with a damaged cord or plug or operate it after the appliance malfunctions or has been damaged in any manner.
Do not use the product close to any heat sources such as radiators, heat registers, stoves, or other products that produce heat.
Do not let the power cord come in contact with hot surfaces.
If you notice any smoke or scorched smell near the product, unplug the power cord and refer to qualified personnel for service and/or repair.
Do not use or place any combustible or flammable substances near the product.
To electrically disconnect the product, turn OFF the product, then remove the electrical power plug from the outlet.
Do not place heavy articles on or step on the product.
Do not place the product on an unstable cart, stand, tripod or table.
Do not use this product for other than intended use.
This Séura product is only intended for use indoors.
This product is not waterproof. Do not immerse this product in water and/or expose it to dripping or splashing water.
For added safety during a lightning storm, or when this product is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.
Specifications of this product are subject to unannounced changes; this manual may thus not reflect the current technical status.
WARNING: READ ALL INSTRUCTIONS AND REVIEW ALL DRAWING SHEETS BEFORE ATTEMPTING TO INSTALL OR SERVICE THIS PRODUCT.
When installing and during the use of this product, basic safety precautions should always be followed to reduce the risk of fire,
electric shock, and/or injury to persons including the following:

• Inspect the desired location for installation and be aware of all electrical wiring pathways, water pipes, gas lines, or other potentially hazardous conditions that may exist to protect from accidental damage during the creation of on-site conditions.
• Ensure all required electrical specifications are adhered to and have been installed by the appropriate individuals and are code approved.
• Ensure all framing requirements, if needed, have been completed to the building code and pose no structural issues.
• It is REQUIRED that this product is plugged into an electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI) to protect against electric shock, fire, and/or injury. Failure to do so will void any warranty for this product.
• Only qualified individuals should attempt to service the product. Removing covers can expose you to high voltage and other dangerous conditions.
• To protect against electric shock, do not immerse the power cord, power plug, or product in water or other liquid.
• Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
• Close adult supervision is necessary when any product is used by or near children.
• Do not operate any product with a damaged cord or plug or operate it after the appliance malfunctions or has been damaged in any manner.
• Do not let the power cord come in contact with hot surfaces.
• To electrically disconnect the product, turn OFF the product, then remove the electrical power plug from the outlet.
• Do not use this product for other than intended use.
• This Séura product is only intended for use indoors.
• This Séura product is not waterproof. Do not immerse this product in water and/or expose it to dripping or splashing water as this could cause an electrical hazard.
• Retain this manual in a safe place for future reference.

WARNINGS:
Do not handle or remove your Television Mirror from the packaging until it is ready to be installed.
To avoid damage to the Television Mirror, only transport it in a vertical position. Transporting the product horizontally permanently warps the mirror.
It is highly recommended that at least three (3) persons assist in the installation of the Television Mirror.

Lighting and Performance

The environment in which the Television Mirror is installed will affect the product performance. The key factors to consider for proper installation are surroundings and ambient light. Use the following guidelines to maximize the performance of the Séura product:
Type of Lighting
Avoid direct natural sunlight and excessive fluorescent lighting. These conditions will diminish the television’s brightness and hinder its performance.
Light Direction
Avoid directing light toward the mirror. Position lights such that they illuminate objects in the room, not the mirror itself. For example, lights on the wall next to the mirror are more favorable than lighting located on the ceiling in the center of the room.
Background Colors
Sidewalls and furnishings that are dark, uniform, and non-reflective will provide better performance of the display. Bright colors, patterns, and contrasting colors will minimize the quality of the display.
DO use ambient or indirect lighting that illuminates the room, not the Television Mirror.
DO use shades or window treatments to block outdoor light that would interfere with picture performance.
DO NOT position lighting directly on the Television Mirror. This will wash out the picture and hinder the product’s performance.
DO NOT position the product opposite bright, untreated windows. Natural lighting will interfere with picture performance.

Care and Maintenance

Our patented mirror technology has been developed to completely protect the mirror surface and allow easy maintenance. Please follow the guidelines listed for proper mirror care and cleaning:

• The glass surface can be cleaned with any conventional non-ammoniated glass cleaner. Care should be taken to use only a soft lint-free cloth. Apply all cleaners directly to the cloth and not the mirror surface. Never saturate the mirror surface as a residual cleaner may seep behind the mirror.
• Stubborn spots can be removed with solvents such as mineral spirits, de-natured alcohol, and acetone. Immediately remove solvent and dirt residues per the prescribed methods above with a compatible glass cleaner or water.

Display Requirements

Operation and Storage Requirements
The ambient temperature for operating the device is between 41 to 122 degrees Fahrenheit. Do not install the device in the proximity of heat sources, such as heating pipes, heaters, furnaces, or other devices that radiate heat. Mount the device in such a way that it is protected against moisture. Trouble-free operation is ensured up to 75% air humidity. To prevent fire or electric shock, never allow liquids to enter the unit. The product must be stored in dry and well-ventilated rooms, without extreme temperature fluctuations. Heat sources and aggressive active substances may not be stored in the proximity of the device. The required storage temperature is 32° F – 140° F at an air humidity of 5 – 85% RH non-condensing. The device must be stored in complete packaging, as delivered.

Installation Environment

Avoid direct light or sun exposure, direct proximity to heat sources, and outdoor installation. The product is specifically designed for indoor use only. There is the danger of fire and of electric shock and damage to the device if it is operated outdoors. Do not place any heat sources such as radiators and heat registers, etc. near the monitor. To reduce eye strain, avoid installing the Séura Television Mirror against a bright background such as a window. Position the monitor at the height of your eye level. Position the monitor directly in front of you at a comfortable viewing distance.
Installation
Have this product installed by qualified personnel only. Use the mounting systems which are specified or recommended by Séura. Install the product in a way that it is fixed properly and take care that children are not exposed to danger. Please take extra care during installation, and avoid impacts. Before cabling your monitor, check that the power is off. To avoid any possibility of electric shock, always connect your equipment to properly grounded outlets. Use of power cords or adapters other than those provided may cause fire or malfunction. Place this product as close to the power socket as possible. Leave enough space to insert and remove the power plug on demand. Even if you switch off the product with your remote control, power is not cut off unless the power cord is unplugged.
The device may only be operated with the provided power adapter. The rated voltage is indicated on the product label. The device is factory-set to the optimal operating voltage (see Technical Specification). Use only power cords and plugs that are suitable for your local electrical outlets. Install the power cords in such a way that it does not obstruct anyone. Ensure furthermore that the cable is not clamped and that it cannot be pulled out accidentally from the power adapter. Do not install the power cords in the proximity of heating elements and never place heavy items on the cable or power adapter. Do not modify or arbitrarily repair the power cords.
CAUTION
Do not use any power cords or adapters other than those provided with this product! Use of power cords or adapters other than those provided with this product may cause fire, electric shock, or malfunction. If several kinds of power cords are provided with this product, use the one that fits your power socket. Do not let the adapter hang down while using it. Do not cover or wrap the adapter.
Leave space around the adapter to prevent overheating. The individual components can be destroyed, if the polarity is reversed or an incorrect connection is used. A goodwill replacement is not possible in such cases, since each device is submitted to meticulous quality inspections prior to shipping. The connecting plugs must be attached in such a way that the connector is held firmly. Have trained technical personnel install the electrical facilities necessary for mounting. The power adapter must be installed in ventilated areas due to heat emissions. Connect the power cord to a grounded outlet. Never cut or damage the power cord.
Please disconnect the device from the power adapter in the following cases:

1. The device is out of use for a lengthy period.
2. The device malfunctions or displays other unusual features, necessitating maintenance work.
3. During a thunderstorm.

Please plan the positioning of the power adapter and the source cables before proceeding with the structural measures and positioning of the Séura Television Mirror. Observe the protection zones when placing the power adapter! For in-wall applications please bear in mind that the power adapter has to be placed beyond the inset due to heat emission. Optional 50’ adapter extension cables may be purchased from Séura.
NOTE
The power adapter should be adequately secured to prevent it from becoming unstable and/or falling. Make sure the power source circuits are properly grounded. Use the supplied power cord in order to connect it to the power source. If your installation requires a different power cord, be sure to use an officially approved power cord displaying the mark of the safety agency that defines the regulations for power cords in your country. Please consider that the AC outlet for the power adapter is placed within reach of the Séura Television Mirror and should be easily accessible in case it needs to be powered off.
Install the unit in a dry environment where the operating ambient temperature will not exceed 40°C / 104°F. Also, don’t position the power adapter on top of the Séura monitor system in order to prevent thermal overload. Ensure that your installation complies with your national and local safety rules. Any servicing, adjustment, maintenance, or repair must be performed only by service-trained personnel.
Ensure the power adapter is installed in an accessible location, to access it easily in case of a defect. If you choose to place the power adapter in a separate space, take care that ventilation is present, because the power adapters need convection cooling for stable working conditions.
When placing the power adapter in a fully enclosed space, make sure the airflow around the sides and top of the power adapter is not restricted. According to a common rule of thumb please calculate the length of the power adapter plus an additional gap of at least 150mm all around for DC 19V power adapters.

Setup

Before using the device please check the following contents of the box for completeness:

Connections

• The unpowered audio variable line out will cut audio from the speaker output.
  † Mini jack connection on the TV, the product includes adapter cables
  *The unpowered audio variable line out will cut audio from the speaker output.

Remote Functions

Installation

Refer to the included custom drawing package for specific dimensions and instructions for your custom product.

1. Verify that the wall is prepared appropriately. If the product is an in-wall or “Recessed” configuration, verify the dimensions of the rough opening.
2. Install mounting brackets according to the dimensions and instructions shown on “Sheet 3” of the included drawing package. Ensure mounting brackets are securely fastened using wood framing members where possible.
   NOTE : Take care when moving the product. Always transport the product with at least two people.
   WARNING : Always transport the product in a vertical position.
   Moving the product in an unsupported horizontal position may result in product flex or damage.
   3. Connect power supplies and audio/video components.• Testing all electrical and electronic devices to verify proper integration and functionality before securely mounting them to the wall is strongly recommended.
   4. Position the Television Mirror close to the wall surface and securely engage mounting brackets.
   • Allow for a ¼” ventilation gap for proper airflow and heat transfer. 5. Check to ensure the Television Mirror is fully engaged and secure to the mounting brackets.
   6. Reference the appropriate electronics manual for Television Mirror operating instructions.

NOTE:
All Séura drawing packages indicate generalized nominal residential wood framing construction and are not indicative of any particular building code. It is the responsibility of the installer that all electrical, audio/visual, and framing construction is code compliant with the municipality in which the product is being installed. Modifications made to Séura’s recommendations are at the sole discretion of the installer and release Séura of all liability.

Making Connections

Connecting Video
The Television Mirror features one Component, one Composite, one VGA, and two HDMI inputs. We recommend using HDMI inputs for the best video and sound quality.

Connecting Audio
Two passive loudspeakers can be connected to the speaker output socket with speaker cables. Observe the polarity (+ and -) of the connections to avoid phase errors (= incorrect stereo playback).
Switch the audio selector switch on the TV to External.
Warning : When changing the audio from internal to external speakers, power off the unit completely. Connecting a USB Media Source
Connect an external USB media source to the USB socket to display photos, play music or install a software update.
In order to have access to the USB port after installation, we recommend installing a USB extension cable. Connecting a Home Automation System
With the RS-232 interface (9 pin d-subminiature connector female) you can connect a serial cable for communication with a home automation system, PC, etc. The baud rate is 115200.
Visit www.seura.com for control documentation.

On Screen Display Menu (OSD)

On Screen Display Menu (OSD)
In the on-screen display menu (OSD) you can adapt the characteristics of your display based on personal preferences. OSD menus include Video, Audio, TV, Setup, and Parental.

1. Press on your remote control to open the OSD menu
2. Navigate within the OSD with the left/right and up/down arrows
3. Change settings with the left/right arrows
4. Go back one step with
5. Confirm selection with the OK button
6. Press to exit the OSD menu.

Input Source Selection

In the Input Source menu, you may select from the available input sources.

1. Press to power the Television on
2. Press to display the Input Source list OR use the quick input controls on the remote to directly designate the input source.
3. Press the up or down arrows until the desired Input Source is highlighted.
4. Press OK to confirm the selection of the chosen input and clear the Input Source list from the screen or press again to switch through the signal inputs.
5. Press to close the Input Source list without selecting an alternative source.

Video Settings
The Video Settings menu offers options to enhance and refine the image characteristics of your Séura Television Mirror. These settings are based on ambient conditions of illumination and personal preferences.
Adjustment options include:
Picture Mode
Brightness
Contrast
Saturation
Hue
Sharpness
Back Light
Advanced Video
Reset Picture Mode

PICTURE MODE
Within the Picture Mode menu, you can customize the image display according to your preferences.
Your options: Home, Vivid, User, Cinema, Sport
The Home setting is recommended for most viewing environments. Select the User Mode to adjust your preferred settings manually.

OSD

Advanced Video Settings
The Advanced Video Settings menu offers further options to refine the image characteristics of your Séura Television Mirror.
Adjustment options include:
DNR
MPEG NR
Adaptive Luma Control
Flesh Tone
DI Film Mode

Blue Stretch
Game Mode
Blue Mute
Gamma
Color Temperature

COLOR TEMPERATURE
Within the Color Temperature menu, you can customize the Color Temperature of the picture according to your preferences.
Your options: Standard, Warm, User, Cool

Audio Settings
The Audio Settings menu offers options to enhance and refine the sound characteristics of your Séura Television Mirror based on personal preferences.
Adjustment options include:
Balance
Bass
Treble

Sound Surround
Sound Mode
MTS
Audio Language
SPDIF Type

TV Settings
The TV Settings menu offers options to set up and adjust preferences using the built-in television tuner.
Adjustment options include:
Tuner Mode
Channel Scan
Channel Skip
TUNER MODE
Select the option for obtaining television programming: Cable, Antenna
CHANNEL SCAN
Select Channel Scan to begin automatic scanning of channels. This process takes a few minutes and depends on program availability.
CHANNEL SKIP
Designate preferences for skipping channels.

Setup Menu
The Setup Menu offers options to determine the fundamental settings of your Séura Television Mirror based on personal preferences.
Adjustment options include:

OSD Language
Caption
Time Setup
Reset Default
TIME SETUP
Options within the Time Setup selection include Time Zone, Time, and Sleep Timer.
TIME ZONE
The local time zone may be selected using the graphical map of North America
SLEEP TIMER
Within the Sleep Timer menu, you can determine a timespan after which the Séura Television Mirror will turn off automatically.
Your options: Off, 10, 20, 30, 40, 50, 60, 90, 120 minutes
The Sleep Timer can also be activated and deactivated directly with the remote control.

Parental Menu
The Parental Menu offers options to restrict program viewing based on various national rating systems.
To access the menu, enter the 4-digit Password using the keypad on the remote. The factory default password is “0000”.
Adjustment options include:
Program Block
Change Password
Clean All (or reset settings)

RS-232 Protocol

Settings Table

Applies to Current Models:

• 10.5 TV Mirror
• 19.5 TV Mirror
• 27.5 TV Mirror
• 19.5 Hydra
• 27.5 Hydra

Basic Format for Control:
The Transmission of data from the Controller (Computer or A/V Controller) starts with an STX [0x02] signal, followed by the command, then the parameters, and lastly an ETX [0x03] signal. If there are no parameters, then the parameter does not need to be sent. A colon separates the commands from the parameters.
All Commands start with STX [0x02] and end with ETX [0x03]. Any data not contained between the STX and ETX commands will be ignored by the TV. STX and ETX must be sent as hex commands; all other data must be sent as ASCII characters.

NOTE : The brackets [ ] in the rest of this document do not get sent or returned in the command/query. They are there to indicate characters to be sent in hex.
All responses from the TV to Queries start with STX [0x02] and end with ETX [0x03]. Any data not contained between the STX and ETX commands must be ignored by the controller. STX and ETX must be sent as hex commands; all other data must be sent as ASCII characters.
Contact Séura Technical Support for instructions on accessing the Service Menu at 800-957-3872 or techsupport@seura.com

• Each command is a string of ASCII characters plus a Parameter.

• A colon separates the Command from the Parameter.

• The Parameter is 1 to 5 ASCII characters long.

• After each command is received, the TV shall send back an acknowledgment.

• For most commands, this will be a simple STX[0x02], the ASCII letters “OK”, and an ETX[0x03]

• If there is an error, the TV shall return STX [0x02], the ASCII letters “ER”, and ETX [0x03]. There may be parameters added after a
  colon if more details are possible.

• If a command is sent to a TV that does not support this command, i.e. a tuner command for a monitor, the set shall return STX [0x02], the ASCII letters “INVALID” or “ERR” and ETX [0x03].

NOTE : AMX programmers may need to add 100ms delays between parameters in commands.

Examples:

All commands are ASCII, except STX and ETX, which must be sent in hex. NOTE: The brackets [ ] in the rest of this document do not get sent or returned in the command/query. They are there to indicate characters to be sent in hexadecimal form.

Example of a Power ON for Unit 001:
COMMAND: [0x02]001;PWD:1[0x03] TV Returns: [0x02]OK[0x03]

Example of a Power ON with No Unit Number:
COMMAND: [0x02]PWD:1[0x03] TV Returns: [0x02]OK[0x03]

Query Examples:

Use a “?” as the parameter and the TV will return the current value for that command.
There is no “OK” returned after a query.
Example of a Power Query with no Unit Number.
[0x02]PWD:?[0x03]

Would return this status if the TV is ON: [0x02]1[0x03] Or, this status if the TV is OFF: [0x02]0[0x03]

An example of a Volume Query with No Unit Number assumes that the Volume is set at 50. [0x02]VOL:?[0x03]
TV Returns: [0x02]50[0x03]

Query only works with the Following Commands

KEY COMMANDS: These commands are the equivalent of sending the IR code from the remote control.

INPUT (INP)

| COMMAND| RESPONSE| QUERY| RESPONSE
---|---|---|---|---
VGA| [0x02]INP:0[0x03]| [0x02]OK[0x03]| [0x02]INP:? [0x03]| [0x02]0[0x03]
HDMI 1| [0x02]INP:1[0x03]| [0x02]OK[0x03]| [0x02]INP:?[0x03]| [0x02]1[0x03]
TUNER| [0x02]INP:2[0x03]| [0x02]OK[0x03]| [0x02]INP:?[0x03]| [0x02]2[0x03]
AV1| [0x02]INP:3[0x03]| [0x02]OK[0x03]| [0x02]INP:?[0x03]| [0x02]3[0x03]
HDMI 2| [0x02]INP:6[0x03]| [0x02]OK[0x03]| [0x02]INP:?[0x03]| [0x02]6[0x03]
COMPONENT| [0x02]INP:7[0x03]| [0x02]OK[0x03]| [0x02]INP:?[0x03]| [0x02]7[0x03]

POWER (PWD)

| COMMAND| RESPONSE| QUERY| RESPONSE
---|---|---|---|---
OFF| [0x02]PWD:0[0x03]| [0x02]OK[0x03]| [0x02]PWD:?[0x03]| [0x02]0[0x03]
ON| [0x02]PWD:1[0x03]| [0x02]OK[0x03]| [0x02]PWD:?[0x03]| [0x02]1[0x03]
TOGGLE| [0x02]PWD:3[0x03]| [0x02]OK[0x03]| N/A| N/A

MUTE (MUT)

| COMMAND| RESPONSE| QUERY| RESPONSE
---|---|---|---|---
MUTE| [0x02]MUT:1[0x03]| [0x02]OK[0x03]| [0x02]MUT:?[0x03]| [0x02]1[0x03]
UN-MUTE| [0x02]MUT:0[0x03]| [0x02]OK[0x03]| [0x02]MUT:?[0x03]| [0x02]0[0x03]

CHANNEL (CHA) ¹

VOLUME (VOL)

xxx = Volume value 000 -100

FORMAT (FOR)

IR Commands

Remote
Hexadecimal Codes
Power Toggle

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A0
Menu
0000 006B 0000 0020 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 0768 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F 000A 0048 000A 0048 000A 0048 000A 0048 000A 0048 000A 001F 000A 0048 000A 0048 000A 001F 000A 0048 000A 0654
Source
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 06C8 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 06F2
Display
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 06D4 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06C7
Exit
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0685 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 071A
Up
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 06C8 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 06F6
Down
0000 006B 0000 0020 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0048 000A 001F 000A 0048 000A 001F 000A 0048 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 001F 000A 0048 000A 001F 000A 0047 000A 001F 000A 0047 000A 06A4
Left
0000 006B 0000 0020 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0048 000A 001F 000A 0048 000A 001F 000A 0048 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 001F 000A 0048 000A 001F 000A 0047 000A001F 000A 0047 000A 06A4
Right
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 06A0 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 071B
Enter
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0048 000A 0047 000A 001F 000A 0048 000A 0048 000A 0047 000A 0048 000A 0048 000A 001F 000A 0678 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 074E
Sleep
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 06FC 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 059B
Zoom
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0048 000A 0048 000A 001F 000A 0740 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F 000A 0048 000A 0048 000A 0047 000A 0048 000A 0047 000A 001F 000A 0048 000A 001F 000A 001F 000A 0047 000A 068B
EPG
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 06C8 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 06EE
Mute
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 06D4 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06C9
ch+
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 0048 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067E
ch-
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0048 000A 001F 000A 001F 000A 001F 000A 0048 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0048 000A001F 000A 0048 000A 0048 000A 001F 000A 0047 000A 0048 000A 0048 000A001F 000A 0047 000A 0683
vol+
0000 006B 0000 0020 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A0740 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A001F 000A 0047 000A 067C
vol –
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A8
1
0000 006C 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 074A 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0652
2
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0768 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0651

3
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0723 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067D

4
0000 006B 0000 0020 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A0768 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A001F 000A 0047 000A 054F
5
0000 006B 0000 0020 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A0740 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A001F 000A 0047 000A 067E
6
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A7
7
0000 006B 0000 0020 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A0718 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 0047 000A001F 000A 0047 000A 06A6
8
0000 006B 0000 0020 000A 0047 000A001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A0768 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A0048 000A 0047 000A 001F 000A 0047 000A 0047 000A 0048 000A 0047 000A001F 000A 0048 000A 065B

9
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067E
0
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0678
. (Dot)
0000 006C 0000 0020 000A 0046 000A 001E 000B 001E 000A 001E 000B 0047 000A 001E 000B 0046 000A 001E 000B 0046 000A 0046 000A 0046 000B 001E 000A 001E 000B 0046 000B 001D 000B 06A5 000B 0046 000B 001E 000A 001E 000A 001E 000A 0046 000B 0046 000A 001E 000B 0046 000A 001F 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A 0045 000A 0696

Enter
0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 06FC 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A1

Discrete Remote Hexadecimal Codes

Power On(only)
0000 006d 0000 0020 000a 0047 000a001e 000a 001e 000a 001e 000a 0047000a 001e 000a 0047 000a 001e 000a0047 000a 001e 000a 001e 000a 0047000a 001e 000a 0047 000a 001e 000a068b 000a 0047 000a 001e 000a 001e000a 001e 000a 0047 000a 0047 000a001e 000a 0047 000a 001e 000a 0047000a 0047 000a 001e 000a 0047 000a001e 000a 0047 000a 068b

Power Off(only)
0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047000a 0047 000a 0047 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047
000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047
000a 0047 000a 001e 000a 0047 000a 001e 000a 0047 000a 068b

AV (INPUT 1)
0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 068b

S-VIDEO (INPUT 2)
0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e
000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e
000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 068b

COMPONENT (INPUT 3)
0000 006d 0000 0020 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047 000a 0047 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e
000a 0047 000a 0047 000a 001e 000a 068b 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 0047
000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 068b

VGA (INPUT 4)
0000 006d 0000 0020 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e
000a 0047 000a 0047 000a 001e 000a 068b 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047
000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 068b

HDMI (INPUT 5)
0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047 000a 068b
HDMI 2
0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047 000a 068b
ANT
0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 068b
Download these codes at http://www.seura.com/download-center

Troubleshooting

If the product is not working properly, please check the following troubleshooting hints before you contact customer service:

moments when the TV is powered on, then extinguish. Please check if an input source is available and that the port of the device has been connected correctly in the Service Settings/ Input Ports menu. Press “Menu” on your remote control: you should see the OSD menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the Television Mirror to its default settings. If the problem still exists contact customer service.
Color defects| Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged.
The image is unsatisfactory| Adjust the picture characteristics as described in the above-mentioned section “Video Settings”. Image is not stable Check that the display resolution and frequency from your media source is compatible with the Television Mirror.
Error message: “No Signal”| Check that the connected media sources are switched on. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Press “Menu” on your remote control: you should see the OSD menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the Television Mirror to its default settings. If the problem still exists contact customer service.
Low or no sound| Press “Volume Up” and/or “Volume Down” on your remote control and check the audio connection cable(s). Make sure that the Volume Limit setting in the Service Settings menu has been set to an audible value.
Ensure that the speaker selector switch on the until is correctly switched to designate internal or external speakers.
Remote control doesn’t work| Replace the batteries in the remote. Tip! If the problem persists, verify that the remote is sending IR signal by observing the IR output on the remote via a cell phone camera. IR signal will appear blue in the camera. If there is no IR signal or the problem persists, contact customer service.

NOTE : If the above troubleshooting hints do not help you to find a solution, please contact Séura.

Technical Specifications

| 10 INCH TV
Model: 10, Version: 5| 19 INCH TV
Model: 19, Version: 5| 27 INCH TV
Model: 27, Version: 5
---|---|---|---
CUSTOMIZATIONS| CUSTOM DESIGN OPTIONS| Custom frame, ambient lighting, light diffuser, TV screen placement, mirror shape, custom holes, matching mirrors
---|---|---
CUSTOM TECHNOLOGY OPTIONS| Brilliant LED Technology™ lighting, Digital Clock, dimmable lighting, LED nightlight, mirror defogger
CUSTOM FUNCTIONALITY OPTIONS| Fingerprint protection coating, tamper-free security hardware*, safety mirror backing
MAXIMUM MIRROR SIZE| Up to 125″ w x 72″ h or 72″ w x 125″ h

STANDARD MIRROR SIZE

| 24″ w x 36″ h

33″ w x 36″ h

45″ w x 36″ h

| 24″ w x 36″ h

33″ w x 36″ h

45″ w x 36″ h

|

33″ w x 36″ h

45″ w x 36″ h

MINIMUM MIRROR SIZES

| 18 ½” W x 19″ H (Recessed); 20 ½” W x 22 ½” H (Surface)| 21 5/8″ W x 24 ½” H (Recessed); 23 ¾” W x 28″ H (Surface)| 28″ W x 29″ H (Recessed);

29″ W x 33″ H (Surface)

VIDEO| VIEWABLE SCREEN SIZE| 8 7∕8″ w x 5″ h| 16″ w x 10″ h| 23 3/4″ w x 13 1/2″ h
DISPLAY RESOLUTION| 1024 x 600| 1440 x 900| 1920 x 1080
ASPECT RATIO| 16:10| 16:10| 16:9
CONTRAST RATIO| Typical 500:1| Typical 1000:1| Typical 1200:1
TUNER| ATSC, NTSC, QAM| ATSC, NTSC, QAM| ATSC, NTSC, QAM
RESPONSE TIME| 7 ms| 3.6 ms| 3.5 ms
VIEWING ANGLE| 45°/45°/45°/20°| 170° Horizontal, 160° Vertical| 170° Horizontal, 160° Vertical
POWER CONSUMPTION| DC 19V 10W / .083A| DC 19V 40W / .333A| DC 19V 50W / .417A
INTEGRATION| HDMI| 2| 2| 2
COMPONENT YPBPR| 1†| 1†| 1†
COMPOSITE (AV)| 1†| 1†| 1†
VGA| 1| 1| 1
S-VIDEO| 1| 1| 1
RF COAXIAL ANTENNA| 1| 1| 1
USB| 1| 1| 1
RS-232| 1†| 1†| 1†
IR INPUT| 1| 1| 1
IR OUTPUT| 4| 4| 4
AUDIO| PC AUDIO IN| 1| 1| 1
LINE OUT| 2 (1 powered, 1 unpowered)| 1 (powered)| 2 (1 powered, 1 unpowered)
PHOENIX-TYPE SPEAKER OUTPUT| 2 x 5W @8Ω/ channel| 2 x 5W @8Ω/ channel| 2 x 5W @8Ω/ channel
INTERNAL SPEAKERS| 2 x 10W| 2 x 10W| 2 x 10W
INSTALLATION| MOUNT OPTIONS| Integrated Surface Mount or Integrated Recessed Mount
SURFACE MOUNT OFF-WALL DISTANCE| 1 1/2″| 1 1/2″| 1 1/2″
RECESSED MOUNT IN-WALL DEPTH| 3/4″| 3/4″| 3/4″
RECESSED MOUNT WALL OPENING SIZE| 22″ w x 26″ h| 22″ w x 26″ h| 27″ w x 30″ h
RECESSED MOUNT VENT GAP| 1/4″| 1/4″| 1/4″
OTHER| CERTIFICATIONS AND COMPLIANCE| FCC, MET| FCC| FCC

WARRANTY

| Séura’s labor for three (3) years; mirror, glass, structure, frame, and assembly for three (3) years; TV including remote and power supply for two (2) years.
REMOTE| Séura IR Remote Control

Additional cost for customizations.
* Security hardware is optional on lighted mirrors and lighted TV mirrors only
† Mini jack connection on the TV, the product includes adapter cables
** The unpowered audio variable line out will cut audio from the speaker output.

Control Documentation

To access current control documents, please visit www.seura.com/download- center

LIMITED PRODUCT WARRANTY
For information regarding Séura’s warranty policy, please visit our website: www.seura.com/warranty.
If the current Séura warranty policy is after your product purchase date, please contact Séura Customer Support to request warranty documentation from the date of your purchase.
For additional customer support, please contact Séura.
Toll-Free : 1-800-957-3872 (Monday – Friday 8:00 am – 4:30 pm, Central Time)
Website: www.seura.com/support
For responsible recycling information, please contact Séura or visit the following URL: https://www.seura.com/support/recycling/

1230 Ontario Road Green Bay, Wisconsin 54311
1-800-957-3872 contacts@seura.com
www.seura.com
Information is subject to change without notice.
© 2022 Séura

References

• Séura | Technology + Design
• Support - Séura
• Recycling Programs - Séura

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>