mercury 421.778UK Magnetic Wireless Charger User Manual
- September 14, 2024
- Mercury
Table of Contents
mercury 421.778UK Magnetic Wireless Charger
Product Information
Specifications
- Input: 5V/3A, 9V/3A, 12V/2A
- Phone Output: 5W/7.5W/10W/15W (max)
- Earphones Output: 5W
- Watch Output: 2W
- Input Interface: USB Type-C
Product Usage Instructions
- Open the Charger: Open the 3 in 1 Charger and place it on a flat surface.
- Connect the USB Cable: Connect the supplied USB C cable to the charger and the other end to a compatible outlet.
- Power On: The green LED should illuminate indicating the charger is powered on.
- Place Devices for Charging:
- Phone: Place your phone on the wireless phone area on the left pad.
- Watch: Place your compatible watch on the watch pad.
- Earphones: Place your compatible earphones on the earphones pad.
- Charging Status:
- Phone or Earphones: LED blinks slowly during charging.
- Watch: LED remains on during charging.
- Rapid LED Blinking: Indicates an unknown or incompatible device detected. Remove the device for charging to continue.
FAQ
- Q: What should I do if the LED light blinks rapidly?
- A: Rapid blinking indicates an unknown or incompatible device. Remove the device for charging to continue.
- Q: Can I charge all three devices simultaneously?
- A: Yes, the charger is designed to charge 3 devices simultaneously – a phone, watch, and earphones.
- Q: What happens if I connect the charger to an incompatible outlet?
- A: Make sure to connect the charger to a 5V/3A, 9V/3A, 12V/2A, or compatible outlet to ensure proper functioning and charging.
Thank you for purchasing this 3 in 1 Magnetic Wireless Charger.
This unit is a compact wireless charger for home, business, and travel use. It can charge 3 devices simultaneously. To charge your mobile phone, watch and earphones simply place them on the designated area and charging will automatically start.
Operating Instructions
- Open the 3 in 1 Charger and lay it on a flat surface.
- Connect the supplied USB C cable to the charger and the other USB C to a 5V/3A, 9V/3A, 12V/2A or compatible outlet. The charger will then power on and the green LED should illuminate.
- Place your phone on the wireless phone area on the left pad.
- Place your compatible watch on the watch pad.
- Place your compatible earphones on the earphones pad.
The LED light will blink slowly when charging a phone or earphones. When charging a watch, the LED will remain on. If the LED starts to blink rapidly, this means that an unknown or incompatible device is being detected. This device must be removed for charging to continue.
Product Specifications
- Input: 5V/3A, 9V/3A, 12V/2A
- Phone Output: 5W/7.5W/10W / 15W (max)
- Earphones Output: 5W
- Watch output: 2W
- Input interface: USB Type-C
Warning:
- For reasons of electrical safety, this device must never be immersed in water, exposed to damp conditions or excessive force.
- Do not locate this device close to a source of heat or expose to high temperatures.
- Do not use this device if you find that it is damaged in any way.
- Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines. Errors and omissions excepted. Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House, Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>