Treevol MLW 8988 Corner Bar Cabinet Rialto Installation Guide

September 12, 2024
Treevol

MLW 8988 Corner Bar Cabinet Rialto

“`html

Specifications

  • Model: Corner Bar Cabinet
  • Material: Wood, Glass, Metal
  • Dimensions: [Insert Dimensions]
  • Weight Capacity: [Insert Weight Capacity]

Product Usage Instructions

What You Will Need:

  • Phillips head screwdriver
  • Flat head screwdriver
  • Hammer
  • A flat, smooth surface (cardboard or rug)

Assembly Steps:

  1. Ensure all panels and hardware are accounted for and in good
    condition.

  2. Follow the panel quantity list provided to confirm you have all
    necessary parts.

Wood Dowels and Minifix System:

Wood Dowels:

  1. Insert the dowel into the indicated hole between panels.
  2. Gently tap the dowel until fully inserted to join the panels
    securely.

Minifix System:

  1. Insert the Minifix cam with the arrow pointing towards the
    panel’s edge.

  2. Secure the joint by turning the spreading bolt.

FAQ

How much weight can the cabinet resist?

The cabinet is designed to resist [Insert Weight Capacity] of
weight.

How do I take care of my cabinet?

To take care of your cabinet, regularly dust it with a soft
cloth and avoid using harsh chemicals for cleaning.

“`

ASSEMBLY INSTRUCTIONS
CORNER BAR CABINET
It’s much better if you get some company for this!

LOT N°

Index

What will you need?

2

Where should you start?

3

What’s in the hardware bag?

4

How do the dowels and Minifix system work?
(We also explain what they are)

5

Let’s start assembling!

6

How much weight does your cabinet resist?

21

Our last recommendations for taking care of your cabinet

22

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

Phillips head screwdriver Flat head screwdriver Hammer

A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
2

Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity

A – x1 E – x1 I – x1 M – x1

B – x1 F – x1 J – x1

C – x2 G – x3 K- x1

D – x1 H – x1 L – x1

3

What’s in the hardware bag?

Wood dowel
x47

Spreading bolt
x32

Minifix cam
x32

Cover caps
x32

2″ 2 1/2″

Glass Hanger
x1

Flat head screw
x5

Drywall screw
x4

Wall anchor + screw
x2

Corner brace x2

Plastic leg x4

Glass Door
x2

Mirror + Tape x1

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

4

What’s in the hardware bag?

Metalic handle
x2

Glass door hinge
x4

Magnetic stop
x1

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 5

How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.

Wood dowels
They are little wooden cylinders.

When joining two

1

Put in the dowel

2

inside the indicated

panels together, don’t forget to gently hit

hole and softly hit it

the panels to adjust

until it’s fully inside.

the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1

small arrow
This is a Minifix cam.

3

It has a little arrow on its

upper surface.

This is a spreading bolt. You should put it with the black plastic part facing down.

2

You should insert these cams

with the little arrow pointing towards the drilling on the

4

panel’s edge (shown on the

left).

After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.

6

1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.
A
TURN OVER
A
7

2
B
TURN OVER
B
8

3
C
TURN OVER
C
9

4
D E
5
F
10

6
G
TURN OVER
G
11

7
H
8
I
12

9

J/K

10

Place the mirror on

the piece.

2

1
Mirror
L
13

11
M
TURN OVER
M
14

12

C F
13

F

C

B
15

14
E
C F
B D
15

F

E

D

C

B

A
16

16
H J
17
I K
17

18

J

H

M

19

IK G
Drywall screw
2″
M

J

IK

G

F

DB

E C

A
18

20
M

J

L IK

G

F

E

D

B

C

A

Glass Door Installation
HANDLE

GLASS HINGE

1
Stick Tape

2 1
Put the handle with some pressure

2 Tighten 19

12

Fix your cabinet to the wall

1 On the wall, measure and mark the points shown below.

2 Drill on the markings with a 5/16″ drill bit.

3 Insert the wall anchors inside the drillings.

4 Place the cabinet and secure it with the screws.
282,8,55/ 282,8,55/ 282,8,55/ 282,8,55/
M

JL

IK

192/ 75,6

G

  • Centímetros / Inches

F

D

E

B

C

A

After adjusting all the Minifix cams, cover
them up with the cover caps.

A

After finishing the assembly, lift off al the
adhesive letters.
20

How much weight does my cabinet resist?

4 4

5

*weight in pounds

Congratulations! It’s done

But don’t go yet!

There are some recommendations left for you to take care of your cabinet
correctly from now on.

SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.
21

Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun. Clean the metallic hardware with a dry cloth. DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the cabinet (only when indicated here). Clean it with thinner, a soft soap solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
M L
I H

J B
D

K
G C
F E

A

22

WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty coverage in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
23

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Treevol User Manuals

Related Manuals