SCHLAGE L400 Series Gen 2 Indicator Instructions
- May 15, 2024
- Schlage
Table of Contents
SCHLAGE L400 Series Gen 2 Indicator
Specifications
- Functions: L460, L462, L463
- Indicator Side: Outside, Inside, Dual
- Trim Sectional Escutcheon
- Strike Armor Front
- Left Hand (LH) Door Shown
Product Usage Instructions
-
Door Edge Preparations
Refer to template LG4 for door edge preps. Make sure to follow the provided template for accurate door edge preparations. -
Case and Strike Dimensions
Refer to Template LG2 for case and strike dimensions. Ensure proper dimensions are followed for installation. -
Wire Routing Preparation
If applicable, refer to Template LG2 for information on preparing the door for wire routing. Follow the guidelines provided in the template. -
Door Preparation
For preparing the door, use the armor front deadbolt, auxiliary latch, and latch bolt holes shown for dimensional purposes only. Use the door edge measurements for accurate door preparation. -
Dimensions
Dimensions shown in parentheses are in millimeters. Note that the drawing is not to scale. -
Template
Door preparation template: LG222
Indicator Side Trim
Outside| Sectional
Inside Escutcheon
Dual|
Functions: L460, L462, L463
DIMENSION
Refer to Template LG2 for case and strike dimensions and if applicable
information to prepare the door for wire routing. Armor front deadbolt,
auxiliary latch, and latch bolt holes are shown for dimensional purposes only.
Use door edge measurements for door preparation.
Dimensions shown in parentheses are in millimeters.
Door preparation template
Drawing not to scale.
FAQ
Frequently Asked Questions
- Q: How should I determine the proper door edge preparations for this indicator?
- A: Refer to template LG4 provided in the user manual for accurate door edge preps.
- Q: What should I do if I need information on wire routing preparation?
- A: Check Template LG2 for details on preparing the door for wire routing.
Door preparation template
© 2024 Allegion
LG222 Rev. 03/24
www.allegion.com/us