AQIRYS TGA ALPHA Gaming Mouse User Manual
- June 9, 2024
- AQIRYS
Table of Contents
QUICK START GUIDE
Tips
Please, remove the skates’ protecting film before starting using the mouse.
Mouse overview
- Left Button
- Right Button
- Scroll Wheel
- DPI Button
- Side Button 1
- Side Button 2
- Power ON/OFF/LED
Setup
- Connect the mouse to an available USB p o r t on your computer.
- Download the software driver (available here: www.aqirys.com/product/t-g-a) > Unpack and install > Use the software t o customize your mouse settings.
- Connect the wireless receiver to an available USB p o r t on your computer ( directly or using the included extension adapter and the USB cable).
- Slide the Power s witch to the ON position (A or B). The mouse and receiver will automatically connect.
- Download the software driver (available here: www.agirys.com/product/t-g-a) > Unpack and install > Use the software to customize your mouse settings.
LED System
For the LED system to properly activate, if sliding the power switch from
position B to position A, please s top and wait for 3-5 seconds in position C.
For the LED system to be active in wired mode, the power switch must be set to
position B while the mouse is in wireless model !
Battery level indicator
When the battery level i s low (10%), the logo LED will blink rad. Connect the
mouse to the PC using the USB cable to start charging the battery ( the LED
will blink orange).
Once the battery i s fully charged, the LED will turn solid green.
Note! To preserve the battery life as much as possible, we recommend
unplugging the USB cable and switching to wireless mode as soon a s the
charging is complete.
Wireless paring
The switch between the wireless and wired mode i s made automatically. If the wireless connection becomes unstable, the mouse and the receiver can be re- paired.
- Keep pressed the Left Button + Wheel Button + Right Button until the scroll wheel LED blinks yellow.
- Release the buttons and place the mouse near the receiver. Unplug and then replug the receiver to the USB port. Once the pairing i s complete, the scroll wheel LED will s top blinking.
Customization
-
Palm-rest installation
The magnetic palm rest can be easily detached and replaced by gently pulling its lower edge.
-
Choosing the palm-rest type
The mouse allows adjusting the level of palm support so it can perform
optimally with your preferred grip style (Palm, Claw, Finger). For Claw and
Finger styles, we recommend installing low-profile modules (marked Low}, and
for Palm styles, we recommend the high-profile modules (marked High}. We
recommend installing the p erforated modules to minimize the mouse weight and
palm perspiration while gaming.
-
Main buttons’ cover
The main buttons’ cover can be easily detached and replaced or customized. Remove the palm rest. Gently but firmly push the locking pins, and pull the lower edge of the buttons cover.
-
Left/Right click softness
Your mouse comes with a set of spacers of different thicknesses that can be used to customize the Left and Right buttons feedback. Thickness is indicated by a number on the spacer We recommend the higher thickness for crisp and tactile click feedback and the lower thickness for light and soft click feedback.
Detach the main buttons cover, flip it and gently remove the installed spacers using a sharp thin tool. Peel and stick the new spacers in to place.
-
**Button and side grips
**
- Skates replacement
SUPPORT
If you encounter errors or any other problems with the mouse don’t hesitate to contact us.
|
---|---
https://www.aqirys.com/product/t-g-a-alpha|
https://www.instagram.com/aqirys/
© AQIRYS®. All rights reserved. AGIRYS® name and logo and all other related products, service names, and design marks are trademarks or registered trademarks of PC-ccolers SRL. All other brand names and trademarks are the property of their respective owners. Specifications and design are subject to change without notice due to product improvements.
REGULATORY
- Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.
- This product is safe and complies to EU requirements. (compliant with directive EMC (2014/30/EU), R.E.D (2014/53/EU), LVD (2014/35/EU))
- This product is manufactured conforming with the European RoHS standard. (compliant with directive RoHS 2.0 (2015/863/EU))
- Using the WEEE symbol (the crossed-out bin) indicates that the electrical and electronic equipment inside the package can be recycled. When recycling waste properly, you protect the environment and people health. Segregated household waste collection, aids recycle materials and components used for the production of this device. For detailed information about recycling, please contact your retailer or a local authority.
DECLARATIE DE CONFORMITATE
Noi, S.C. PC-coolers S.R.L. cu sediul social in Bucuresti, strada Matei Basarab, nr. 98, bloc 86, scara 2, etaj 3, apartament 40, sector 3, cu certificat de inregistrare seria J40/1005/2005 prin reprezentant legal Director General
Tip produs | Brand | Denumire marketing | Numar model |
---|---|---|---|
Mouse PC | AQIRYS | T.G.A. Alpha | FM15DM |
la care se refera aceasta declaratie, nu pune in pericol viata, sanatatea,
securitatea muncii, nu produce un impact negativ asupra mediului, nu pune in
pericol securitatea oamenilor, animalelor dom estice si bunurilor mobile si
imobile si este in conformitate cu urmatoarele reglementari si Directive
Europene:
RoHS 2.0 (2015/863/EU), EMC (2014/30/EU), R.E.D (2014/53/EU), LVD (2014/35/EU)
si urmatoarele Standarde Europene:
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013
Benzi de frecventa si putere (mouse si transceiver) a. Banda (bandele) de
frecventa in care functioneaza echipamentul radio: – WIFI: 2.400 – 2.4835 GHz
b. Puterea maxima de frecventa radio transmisa In banda (bandele) de frecventa
in care functioneaza echipamentul radio:
– EIRP/GFSK: 4.53 dBm (mouse)
– EIRP/GFSK: 4.34 dBm (transceiver)
Potrivit dispozidilor HG 487/2016 si ale HG 409/2016, produsul este marcat
“CE”.
Prezenta declaratie fost completata conform documentelor emise de catre Producator.
Importator si Distribuitor in Romania: SC PC-coolers SRL
Adresa: Calea Vitan 154-158, sector 3, Bucuresti, Romania
031.433.7200
office@pc-coolers.ro
www.pc-coolers.ro