Metra Scion2004-2015 Instructions

: June 7, 2024
: Metra

Table of Contents

Metra Scion2004-2015
KIT FEATURES
TOOLS REQUIRED
KIT COMPONENTS
DASH DISASSEMBLY
KIT ASSEMBLY
- DIN Radio Provision with Pocket
- ISO DIN Radio Provision with Pocket
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Metra Scion2004-2015

Product Image

Scion 2004-2015 (Including xA, xB, tC and xD Models)
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle speciﬁc applications

KIT FEATURES

DIN radio provision with pocket
ISO DIN radio provision with pocket

TOOLS REQUIRED

Panel removal tool
Phillips screwdriver
Socket wrench

KIT COMPONENTS

Radio housing
Bracket Set 1
Bracket Set 2
Bracket Set 3
ISO Snap-in brackets
Trim plate

DASH DISASSEMBLY

Scion xA 2004-2006

Unclip and remove the climate control trim panel.
Unclip and remove the radio trim panel including the climate control vents.
Remove (4) 10 mm hex head screws securing the factory radio. Unplug wiring and remove radio.

Scion xB 2004-2006

Pull outward on the (3) climate control knobs and remove.
Remove (2) Phillips screws from behind the outer (2) knobs.
Unsnap and remove the entire panel surrounding the climate controls and the radio.
Remove (4) 10 mm bolts securing the radio. Unplug and remove the radio.

Scion xB 2008-2015

Unclip and remove the trim panel around the radio including the A/C vents.
Unclip and remove the trim panel at the bottom edge of the dash cavity.
Remove (4) 10 mm bolts securing the radio. Unplug and remove the radio.

Scion tC 2005-2010

Unsnap trim from around shifter, not necessary to completely remove.
Unsnap and remove panel from around radio, including climate controls and radio door.
Remove (2) 10 mm bolts from the top mounting locations and (2) Phillips screws from the bottom mounting locations to remove the radio.

Scion tC 2011-2015

Unsnap and remove the panel from around the radio.
Remove four 10 mm bolts and remove factory radio.

Scion xD 2008-2014

Unclip radio trim panel. Unplug and remove panel.
Remove (4) Phillips screws securing the radio. Unplug and remove radio.

KIT ASSEMBLY

DIN Radio Provision with Pocket

Slide the mounting brackets onto the sides of the radio housing until the side clips engage.

Note: Use Bracket Set 1 for xA, xB 2004-2006, and tC 2005-2010. Use Bracket Set 2 for the 2008-up xB and xD. Use Bracket Set 3 for the tC 2011-up.
For Bracket Set 1 cut and remove all mounting tabs except the tabs being used for your application.

Note: Tabs are marked xA, xB and tC. For Bracket Sets 2 and 3 skip to step 3.
Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward.
Slide the aftermarket radio into the cage until it snaps into place.
Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
Reconnect the negative battery terminal and test the radio for proper operation.
Reassemble the dash in reverse order of disassembly to complete the installation.

ISO DIN Radio Provision with Pocket

Slide the mounting brackets onto the sides of the radio housing until the side clips engage.

Note: Use Bracket Set 1 for xA, xB 2004-2006, and tC 2005-2010. Use Bracket Set 2 for the 2008-up xB and xD. Use Bracket Set 3 for the tC 2011-up.
For Bracket Set 1 cut and remove all mounting tabs except the tabs being used for your application.

Note: Tabs are marked xA, xB and tC. For Bracket Sets 2 and 3 skip to step 3.
Mount the ISO brackets to the radio using the screws supplied with the radio.
Slide the aftermarket radio into the cage until it snaps into place.
Snap the trim plate onto the front of the radio housing.
Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
Reconnect the negative battery terminal and test the radio for proper operation.
Reassemble the dash in reverse order of disassembly to complete the installation.