Treevol MLB 8981 Laska Storage Cabinet Instruction Manual
- September 14, 2024
- Treevol
Table of Contents
- MLB 8981 Laska Storage Cabinet
- Specifications:
- Product Usage Instructions:
- What You Will Need:
- Assembly Process:
- How to Use Dowels and Minifix System:
- Weight Capacity:
- Cabinet Care Recommendations:
- Q: Do I need to secure the cabinet to the wall?
- Q: Can I use an electric screwdriver for assembly?
- Q: What should I do if I lose some hardware during
MLB 8981 Laska Storage Cabinet
“`html
Specifications:
- Product: Storage Cabinet
- Material: Wood
- Color: Various options available
- Dimensions: [Insert dimensions]
- Weight Capacity: [Insert weight capacity]
Product Usage Instructions:
What You Will Need:
Hi! my name is Armando, and I’ll be with you while you assemble
this cabinet.
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface. You can use the cardboard of the box or
a rug.
An electric screwdriver isn’t necessary, but it can make the
work much easier 🙂
Assembly Process:
1. Where Should You Start?
This is so IMPORTANT! Make sure the panel and hardware content
is correct and in good shape before starting.
2. Hardware Bag Contents:
- Wood dowel x22
- Spreading bolt x16
- Minifix cam x16
- Cover caps x16
- Hinge + Screws x3
- Flat head screw x28
- Drywall screw x2
- Wall anchor + screw x4
How to Use Dowels and Minifix System:
Wood Dowels:
-
Put in the dowel inside the indicated hole and softly hit it
until it’s fully inside. -
Gently hit the panels to adjust the joint.
Minifix System:
-
You should insert the Minifix cams with the little arrow
pointing towards the drilling on the panel’s edge. -
Insert the spreading bolt with the black plastic part facing
down.
Weight Capacity:
Your cabinet can resist [insert weight capacity] of weight.
Place heaviest items in the lowest drawers for stability.
Cabinet Care Recommendations:
Follow these tips to take care of your cabinet and ensure its
longevity.
FAQ:
Q: Do I need to secure the cabinet to the wall?
A: Yes, it is crucial to secure the cabinet using an anti-tip
device to prevent tip-over accidents, especially if there are
children around.
Q: Can I use an electric screwdriver for assembly?
A: While not necessary, an electric screwdriver can make the
assembly process easier and faster.
Q: What should I do if I lose some hardware during
assembly?
A: Contact customer support to request replacement hardware to
ensure proper assembly and safety.
“`
ASSEMBLY INSTRUCTIONS
STORAGE CABINET
! WARNING
Children have died from furniture tip over. To reduce the risk of tip over:
ALWAYS secure this furniture to the wall using an anti-tip device. NEVER allow
children to stand, climb, or hang on drawers, doors or shelves. Do not defeat
or remove the drawer interlock system. Place heaviest items in the lowest
drawers. NEVER put a TV on this furniture.
To ensure the safety of those using this cabinet, it is crucial to properly
secure it to the wall using a tip-over device. This product includes the
necessary items for fixing the furniture
to the wall. However, it is important to note that incorrect installation or
failure to use the tip-over device can result in serious injury or even death.
For this reason, we highly recommend that a professional installer handle the
installation of the cabinet to the wall.
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
6
Let’s start assembling!
7
How much weight does your cabinet resist?
14
Our last recommendations for taking care of your cabinet
15
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1 E – x1 I – x2
B – x1 F – x1
C – x2 G – x4
D – x1 H – x1
3
What’s in the hardware bag?
Wood dowel
x22
Spreading bolt
x16
Minifix cam
x16
Cover caps
x16
1/2 ” 2 1/2″
Hinge + Screws
x3
Flat head screw
x28
Drywall screw
x2
Wall anchor + screw x4
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 4
What’s in the hardware bag?
Broom holder
x1
Handle +
Leg
Screws
Nail
x4
x1
x32
Mobile shelf support
x2
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 5
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
6
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
A
TURN OVER
A
2
B
7
3
C
4
D E 8
5
F Gx4
6
H 9
1/2″
7
E G G G
G
F B
8
B
G
G
G
E G
C
F 10
9 10
D
E G
B G
G
G C
A
F
E I
I
B C F A
3mm
11
3mm
11
D
G
I
H
G
G
BG
C F
A
Hinge adjustment
Depth adjustment
Lateral adjustment
Height adjustment
Front screws adjustment
12
12
Fix your cabinet to the wall
1 You must drill the bottoms guided by the holes in the structures wiht a
3/16″ drill bit.
2 On the wall, measure and mark the points shown below. 3 Drill on the
markings with a 5/16″ drill bit. 4 Insert the wall anchors inside the
drillings.
5 Place the cabinet and secure it with the screws.
Wall
4.05 / 10,3 7,55 / 19,2 4.05 / 10,3
E
68,58 / 174.0
6,29 /16,0
F
Finished floor
Inches/Milimmeters
4.05 / 10,3 7,55 / 19,2 4.05 / 10,3
After adjusting all the Minifix cams, cover
them up with the cover caps.
A
After finishing the assembly, lift off al the
adhesive letters.
13
How much weight does my cabinet resist?
4
4
4
4
5
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
14
Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do
not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the
cabinet (only when indicated here). Clean it with thinner, a soft soap
solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other
people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
D E
G
B
I
I
H
G
C
G
G
F A
15
WARRANTY POLICY
Furniture has a 1 year warranty coverage in wooden parts and hardware pieces
since its manufacturing date, which you can see in the lot number printed on
the product box and the assembly instructions leaflet. Warranty covers
materials and workmanship imperfections which impair the assembly or correct
functioning of the cabinet. This warranty is not valid if the defects or
imperfections are caused by the incorrect following of the assembly
instructions, warnings and recommendations, misuse, intentional damage, fire
or flood, or after modifications or any kind of alteration, or repaired by
someone not authorized, when it´s been assembled 3 months after the date of
purchase. These defects MUST be reported before the warranty coverage period
ends. Once the product has been assembled, the company will not be responsible
for defective and/or damaged parts. This warranty is ONLY valid for the
ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented,
etc. Furniture will take no liability for incidental or consequential damages
caused to or by the product (This may not apply in your state). To make this
warranty valid you must write to our customer service email describing the
product defect, lot number and submitting your sales reciept or proof of
purchase, or contact us at our customer service line. Replaced parts will be
under the product´s original warranty coverage period. Damaged parts will
become property of the company. There are no other warranties applicable to
this product.
16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>