Treevol WHFP071 Pantry Cabinet Clinton Instruction Manual

September 14, 2024
Treevol

WHFP071 Pantry Cabinet Clinton

Specifications

  • Wood dowel quantity: 40
  • Hinge + screws quantity: 6
  • Spreading bolt quantity: 12
  • Minifix cam quantity: 12
  • Cover caps quantity: 14
  • Handle + screws quantity: 2
  • Nail-on glide quantity: 6
  • H Profile quantity: 1
  • Wall anchor + screw quantity: 2
  • Nail quantity: 38

Product Usage Instructions

What You Will Need

Hi! my name is Armando, and I’ll be with you while you assemble
this cabinet.

  • Phillips head screwdriver
  • Flat head screwdriver
  • Hammer
  • A flat, smooth surface (cardboard of the box or a rug)
  • Electric screwdriver (optional)

Assembly Process

Step 1: Start with Panel Check

Check the panel and hardware content to ensure all parts are
present and in good condition.

Step 2: Dowels and Minifix System

Understand how to use wood dowels and the Minifix system:

  • Wood Dowels:
  1. Insert the dowel into the indicated hole between panels.
  2. Gently hit the dowel until it’s fully inside to adjust the
    joint.
  • Minifix System:
  1. Insert the Minifix cam with the arrow pointing towards the
    drilling on the panel’s edge.

  2. Secure the joint using the spreading bolt.

Step 3: Assembling Panels

Follow the provided assembly diagram to connect panels in the
correct order using dowels and the Minifix system.

Step 4: Wall Mounting

Once assembled, secure the cabinet to the wall using the
provided wall anchor and screws to prevent tip-over accidents.

Weight Capacity

The cabinet is designed to resist a maximum weight of [insert
weight limit here]. Do not exceed this limit to ensure safety.

Cabinet Care Recommendations

Follow these tips to maintain your cabinet for long-lasting
use:

  • Avoid placing heavy items on higher shelves.
  • Clean the cabinet regularly with a damp cloth.
  • Avoid dragging the cabinet to prevent damage.

FAQ

Q: Can I assemble the cabinet without using the wall

anchor?

A: No, it is crucial to secure the cabinet to the wall using the
provided anchor to prevent tip-over accidents, especially in
households with children.

ASSEMBLY INSTRUCTIONS
PANTRY
! WARNING
Children have died from furniture tip over. To reduce the risk of tip over:
ALWAYS secure this furniture to the wall using an anti-tip device. NEVER allow children to stand, climb, or hang on drawers, doors or shelves. Do not defeat or remove the drawer interlock system. Place heaviest items in the lowest drawers. NEVER put a TV on this furniture.
To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a tip-over device. This product includes the necessary items for fixing the furniture
to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death.
For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.

LOT N°

Index

What will you need?

2

Where should you start?

3

What’s in the hardware bag?

4

How do the dowels and Minifix system work?

5

(We also explain what they are)

Let’s start assembling!

6

How much weight does your cabinet resist?

15

Our last recommendations for taking care of your cabinet

16

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

Phillips head screwdriver Flat head screwdriver Hammer

A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
2

Where should you start?

This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)

Panel quantity

A – x1 E – x1 I – x1

B – x1 F – x4 J – x2

C – x1 G – x1 K – x2

D – x1 H – x2

3

What’s in the hardware bag?

Wood dowel
x40

Hinge + screws
x6

Spreading bolt
x12

Minifix cam
x12

Cover caps
x14

Handle + screws
x2

Nail-on glide
x6

H Profile
x1

2 1/2″

Wall anchor

+ screw

Nail

x2

x38

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

4

How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.

Wood dowels
They are little wooden cylinders.

When joining two

1

Put in the dowel

2

inside the indicated

panels together, don’t forget to gently hit

hole and softly hit it

the panels to adjust

until it’s fully inside.

the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1

small arrow
This is a Minifix cam.

3

It has a little arrow on its

upper surface.

This is a spreading bolt. You should put it with the black plastic part facing down.

2

You should insert these cams

with the little arrow pointing towards the drilling on the

4

panel’s edge (shown on the

left).

After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.

5

1
H x2
2
G
6

3
H H
G
4
D
7

5
E
6
F x4
8

7
B

8

E

D

F

F F

B

F

H

H

9

9
C

10

E

D

F

C
F F
B

F

H

H

10

11
A

12

AE

D

F

C

F

F

B

F

H

H

11

13
Turn over the cabinet
very carefully!
Close the Hinges before flip the cabinet.
I
J J B
H G H
3mm
12

3mm

14

Fix your cabinet to the wall
1 On the wall, measure and mark the points shown below. 2 Drill on the markings with a 5/16″ drill bit. 3 Insert the wall anchors inside the drillings. 4 Place the cabinet and secure it with the screws.

Turn over the cabinet
very carefully!

2,56

5,51

12,6

5,51

E

64,33

*Dimensions in inches

13

15
Assembling and setting up the door
Hinge adjustment

A D F BJ F

K F

KC

F

G H

Depth adjustment

Lateral adjustment

After adjusting all the Minifix cams, cover
them up with the cover caps.

Height adjustment

Front screws adjustment

A

After finishing the assembly, lift off al the
adhesive letters.

14

How much weight does my cabinet resist?
17,6
17,6
17,6
17,6
22
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.
15

Taking care of your cabinet:

Do not paint the cabinet.

The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.

Clean the metallic hardware with a dry cloth.

DO NOT overload the cabinet (see suggested loads)

Do not hit or hammer the cabinet (only when indicated here).

Clean it with thinner, a soft soap solution or simply a damp cloth.

Don’t drag the cabinet, lift it up with other people.

Avoid direct contact with water, fire or exposing it to high heat.

Cabinet panels

A

E

D

I

F

KB

F

J

JC

F

K

F

G

H

H

16

WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 1 year warranty coverage in wooden parts and 1 year warranty coverage in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
17

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Treevol User Manuals

Related Manuals