Teltonika OBD Trackers Integrated With Wialon

Commands apply for these devices:

FMB001 FMB010 FMB002 FMB020 FMB003 FMB110 FMB120 FMB122 FMB125 FMB130 FMB202 FMB204 FMB208 FMB900 FMB920 FMB962 FMB964 FM3001 FMT100 FMC001 FMC003 FMC00A FMM001 FMM003 FMM00A FMC125 FMC130 FMM125 FMM130 FMU125 FMU126 FMU130 MTB100 MTB100
All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.
If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.

SMS command structure:
Ypjp=login>
SMS command getinfo example:

• If you have set SMS login and password: login pass getinfo
• If SMS login and password are not set leave two spaces before command: getinfo

GPRS commands require Codec 12 protocol.

To search for compatible products, Expand all content

Common commands

getinfo Device runtime system information.

Yes
FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900

getver Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.

Modem Status information.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250
Common commands

Current GPS data, date and time.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM88

Returns IO status, # AVL ID.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250
Common commands
cpureset Resets device No

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250
Common commands
fwstats Get data about FW and restarts

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

SMS command initiates saving and sending of high priority record.
No
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Common commands
getimeiccid # Response is sent to SMS/GPRS command sender and also to GSM number provided. # GSM number using international format e.g. 37069012345 Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250
Common commands getimsi
Sends the IMSI number of the SIM card inserted as a response to the sender.
If two SIM cards are inserted in the device, the response will be the IMSI number of the currently active SIM card.
Note: This command is supported from 03.10.02 firmware version.

Yes
FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Returns list of all currenty visible operators.

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Common commands
allver Responds with information about hardware and firmware versions and storage space Yes

FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Common commands getparam #

Returns selected parameter value.

– first ID value. # – second ID value. # – third ID value.

SMS command is limited to 160 characters.

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Sets selected parameter value
[Parameter ID] : [New Parameter Value] ; [Parameter ID] : [New Parameter Value]…
SMS command is limited to 160 characters.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Common commands
setparam #:#;#:#;…
flush #,#,#,#,#,#,#
Redirects device to other server.

1. – IMEI.

2. .# – APN.

3. – LOGIN.

4. – PASS.

5. – IP.

6. .# – PORT.

7. – MODE (0-TCP/1-UDP).

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Common commands
countrecs Returns records number.

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

web _connect Forces device to connect to Fota WEB immediately.

Yes

MBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Common commands
deleterecords Delete all records from SD card.

Yes
FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Common commands

setdigout ## Y1 Y2 Z1 Z2
Set digital output.

1. – 0; 1 or ? (0 – OFF, 1 – ON, ? – Ignore) for DOUT1.

2. – 0; 1 or ? (0 – OFF, 1 – ON, ? – Ignore) for DOUT2.

3. Y1 – timeout value for DOUT1 if needed (in seconds).
4. Y2 – timeout value for DOUT2 if needed (in seconds).
5. Z1 – maximum speed value for DOUT1 if needed.
6. Z2 – maximum speed value for DOUT2 if needed.

Yes

FMBXXX
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB900
FMB910
FMB920
FMB962
FMB964
FMB202
FMB204
FMB209
FMC125
FMM125
FMU125
FMC130
FMM130
FMU130
FMU126
MSP500

Common commands
setigndigout ### Y1 Y2 Y3
Set digital output when ignition is off.

1. – 0; 1 or ? (0 – OFF, 1 – ON, ? – Ignore) for DOUT1.

2. – 0; 1 or ? (0 – OFF, 1 – ON, ? – Ignore) for DOUT2.

3. – 0; 1 or ? (0 – OFF, 1 – ON, ? – Ignore) for DOUT3.

4. – timeout value for DOUT1 if needed (in seconds).
5. – timeout value for DOUT2 if needed (in seconds).
6. – timeout value for DOUT3 if needed (in seconds).

Yes

FMBXXX
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB900
FMB910
FMB920
FMB962
FMB964
FMB202
FMB204
FMB209
FMC125
FMM125
FMU125
FMC130
FMM130
FMU130
FMU126
MSP500

battery Returns battery state info.

Yes

FMBXXX

FMB001
FMC001
FMM001
FMB002
FMB003
FMB010
FMB020
FMB120
FMB122
FMB125
FMB130
FMB140
FMB910
FMB920
FMB962
FMB964
FMB202
FMB204
FMB208
FMB209
FMC125
FMM125
FMU125
FMU126
FMC130
FMM130
FMU130
MSP500
FMT100
FMP100
FMC800
FMM800
FMM80

Common commands
wdlog Returns all information about ‘watch dogs’

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250
Common commands
defaultcfg Load default configuration.

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

Add new or change current configuration keyword. If device is locked, keyword cannot
be changed.

1. – old keyword (if adding new keyword space).

2. – new keyword.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

Common commands
delkey # Remove existing keyword (If device is locked, keyword cannot be changed).

– old keyword.

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

Common commands
bbread #
Return black box information (HEX value of event ID and HEX value of custom data  field (optional)).

– returns entered number of latest events. When # is omitted the latest

events are  packed to single SMS.

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

Return same information as bbread command but additional all events timestamp is written in HEX.

– returns entered number of latest events. When # is omitted the latest

events are packed to single SMS.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

Common commands
sdformat Format SD card.

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

Common commands

Bluetooth Commands

Command Description Response HW Support Parameter Group btgetlist #

Returns requested Bluetooth list.

– 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected, 3 – Discovered

BT4/BLE devices).

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

btscan Starts Bluetooth scan.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80
FMC880
FMM880
FMC250

Bluetooth commands
btvisible # Sets Bluetooth to visible with TMO.

– visibility TMO (from 1 to 255 seconds). Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Bluetooth commands
btrelease # Disconnects from current device and pauses auto connect functionality for TMO.

– none or TMO (from 1 to 255 seconds).

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Unpair Bluetooth device.

– all, BT address (all – unpair all devices, BT address – unpair only

specified MAC address).

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Commands Related to Features

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Command Description Response HW Support Parameter Group fc_reset Resets fuel consumption parameters.

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250
Commands related to features  towingreact Towing reactivation.

Yes

FMBXXX

FMB001

FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250
Commands related to features auto_calibrate:get Returns the state of calibration.

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Commands related to features  odoset:# Set total odometer value.

– new odometer value in km.

Yes

FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Commands related to features

Display current odometer value.

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Commands related to features

go2sleep Puts device to sleep ignoring going to sleep condition and stays asleep for the set time.
Note: This command is supported from 03.27.10.Rev.482 firmware version. Yes FMB965 FMB930 Commands related to features on_demand_trackingX

• X=0 – Stops Tracking on Demand functionality.
• X=1 – Starts Tracking on Demand functionality.
• X=2 – Generates one high priority record and inititates data sending to server.

Note: This command is supported from 03.25.06 firmware version.

Yes
FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

Commands related to features

OBD Commands
Command Description Response HW Support Parameter Group obdinfo Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all available information from OBD.

Yes
FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

OBD Commands

Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all visible fault codes.

Yes

FMBXXX

FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

OBD Commands
cleardtc Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Command clears all vehicle stored fault codes. Yes

FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

OBD Commands
getvin Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays vehicle VIN code. Yes

FMBXXX
FMB001
FMC001
FMB010
FMB110
FMB120
FMB122
FMB125
FMB130
FMB140
FMB150
FMC150
FMM150
FMB900
FMB920
FMB202
FMB204
FMB206
FMT100
FMP100
FMC001
FMC125
FMC130
FMM001
FMM125
FMM130
FMC800
FMM800
FMM80A
FMC880
FMM880
FMC250

lvcansetprog

Set program number to CAN Adapter

– three to five digit vehicle specific number

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcangetprog Get program number from CAN Adapter

Yes

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcangetinfo Get information about connected CAN adapter

Yes

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcansimpletacho # Add or remove simpletacho start byte.

– 0 or 1 (0 – don’t add start byte, 1 – add start byte).

Yes

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands

lvcanclear #
Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.

– parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2

– Vehicle Mileage (counted))..

Yes
FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcanfaultcodes Read DTC fault codes.

Yes

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcanopenalldoors Toggle CAN-CONTROL to open [unlock] all doors

Yes

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcanclosealldoors Toggle CAN-CONTROL to close [lock] all doors

Yes

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CANAdapter Commands
lvcanopentrunk Toggle CAN-CONTROL to open [unlock] trunk

Yes

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands

lvcanblockengine Toggle CAN-CONTROL to block vehicle engine (if command is not supported, please, visit FAQ)

Yes
FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands

lvcanunblockengine Toggle CAN-CONTROL to unblock vehicle engine (if command is not supported, please, visit FAQ)

FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands lvcanturninglights
Toggle CAN-CONTROL to flash lights
One flash of all turn lights ordered trough accidental / blinking turn light switch

Yes
FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcanhorn Toggle CAN-CONTROL to activate single horn sound Yes
FMBXXX

FMB110
FMB120
FMB122
FMB125
FMU125
FMC125
FMM125
FMB130
FMU130
FMC130
FMM130

CAN Adapter Commands
lvcansetting#,#
This command is used to set specific counters for vehicles. From that moment of setting the value, vehicle will continue to count from the specified value.

• 1.#:
  0 – setting total engine work time (seconds)

• 1 – setting total mileage of the vehicle (km)

• 2 – resetting total fuel consumption to 0 is available (liters)

• 3 – setting total CNG use (kg)

• 4 – setting electric engine work time (seconds)

• 5 – setting wheel speed sensor impulses (impulses)

• 2.# – value(0 to 0xFFFFFFFF or ? (? – is used to get the current setting value))

• Note: This command is supported from 03.25.15.Rev.145 firmware version.

• Yes FMB140 CAN Adapter Commands lvcanrefresh

• This command forces FMB1YX connection to FOTA WEB to report current CAN adapter status.

• Note: This command is supported from 03.25.16.Rev.281 firmware version.

• Yes FMB140 CAN Adapter Commands

• lvcanreset This command forces CAN adapter reset.

• Note: This command is supported from 03.25.16.Rev.281 firmware version. Yes FMB140 CAN Adapter Commands

• lvcancheck This command reports CAN lines connection information.

• Note: This command is supported from 03.25.16.Rev.281 firmware version. Yes FMB140 CAN Adapter Commands

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>