HUANANZHI X58-RX3.0 Motherboard User Manual

HUANANZHI X58-RX3.0 Motherboard

Product Information

X58-RX3.0 Motherboard

The X58-RX3.0 is a motherboard manufactured by SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD. It supports the CPU LGA1366 and DDR3 memory with speeds up to 1333/1066MHz. The motherboard has ECC I/O and 4 SATA2.0 ports with a speed of 3GB/s. It has 6 USB2.0 ports and 2 USB3.0 ports, one PS/2 port, one RJ45 port, and a 5.1ALC662 HD AUDIO port. It supports PCI Express x16, PCI Express x1, and PCI expansion slots.

Product Usage Instructions

Step 1: Safety Precautions

Before starting the assembly, make sure to follow the safety precautions mentioned in the manual to avoid any damage due to electrostatic discharge (ESD).

Step 2: Installation and Settings

Connect the components firmly with the X58-RX3.0 motherboard. The components include CPU, DDR3 memory, SATA2.0 hard drive, power supply, and expansion cards such as PCI Express x16, PCI Express x1, and PCI. Refer to the motherboard diagram and rear I/O panel to connect the components correctly.

Step 3: Drivers Installation

Install the drivers for the motherboard components such as X58 Chipset Driver, Intel X58 Sound Card Driver, and X58 LAN Driver. The drivers can be installed for Windows 7 or Windows 10 operating systems.

Step 4: BIOS Settings

Access the BIOS settings by pressing the Delete key during the Power On Self Test (POST). Configure the settings for Main, Advanced, Chipset, Boot, Security, Save, and Exit. Save the settings before exiting the BIOS.

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a successful computer assembly.

• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.

• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.

• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.

• Please put the motherboard in an anti-static container or on anti-static pad if not needed .

• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.

• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.

• If you need any assistance in the process of installation，please contact our after-sales customer service or reach us on HUANANZHI official
  E-mail:bussiness@huananzhi.com for professional technical support.

• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.

• Keep the motherboard away from moisture.

• Keep the user manual for future reference.

• Before plugging the power supply, please make sure the socket provides the corresponding voltage.

• In any of the following situations, please keep the mother -board and power cable in a safe place. Do not put anything onto the power cable.

• In the event of any of the following conditions, have the board checked by a service technician:

  • Liquid penetrated into the computer.
  • Motherboard is exposed to moisture.

Motherboard does not work even if you follow the instruc -tions on user manual.
Motherboard fell off to the ground and got damaged. Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as
possible.

• 1.1*HUANANZHI X58-RX 3.0 Motherboard
• 2.1*SATA data cable
• 3.1*I/O shield back plat
• 4.1*User manual
• 5.1* Warranty card

BRIEF INTRODUCTION

Features
CPUs supported: Support LGA1366 series processors
RAM supported: Supporting four channels of DDR3
I/O attributes：

• 1333/1066MHZ, with standard and ECC memory
• 4SATA2.0(Max data transmission rate of 3GB/s) 6USB2.0 ports
• 2*USB3.0 ports
• 1*RJ45 Gigabit Ethernet ports
• 1*Audio interface

HD AUDIO sound effect：
Supporting 5.1 soundtrack HI-FI audio input/output（ALC662）
Providing audio input/microphone/front speaker/rear speaker and side speaker output port
Audio output: this is the front speaker output port that stereo speakers or earphones can be plugged into
Onboard NIC: Gigabit Ethernet interface
Expansion slots：

• 1*PCI-E x16 Slot
• 1*PCI-E x1 Slot
• 1*PCI Port

MOTHER BOARD IMAGE

X58-RX 3.0 Motherboard illustration

Rear I/O Panel

Overall Rear I/O Panel Display

LAN Port Status Table

Audio Port Configuration

Installation And Settings

NOTICE

please check the motherboard where all pins marked with number“ 1” or white bold line are position“ 1”

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation.
2. Align the memory module into the slot and press
3. Let the snaps on both ends of the slot automatically bounce

Memory Installation

1. Use a screwdriver to remove the bezel and screws on the main unit
2. Need to pick up the card slot of the card slot when installing the graphics card
3. Insert the graphics card into the card slot of the graphics card
4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws
6. Install the power cord

Graphics Card Installation

Drivers installation

Drivers listing:

Intel Chip Information Installation
Run “Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s hardware device and proceed with the installation below：
Option: Propertyl – Update driverl – Not connect to Internet – Manually installation
Find the corresponding directory
Select “Next step”

Audio driver installation
Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installation.

Audio driver installation (take HD Audio series for example)

Run “driver installer”: /X58 HD AUDIO/Vista_Win7R267/WDM R267.exe
Click on “next”to continue,and then”finished”
The system will automatically restart itself to finish the installation

Uninstallation of audio driver(take HD Audio series for example)

Getting into Windows desktop, choose “setting”/ “control”,and then “add/remove programs”. Later, choose “Realtek High Defi-nition Audio Driver” in the menu and click on “add/remove”so thatthe driver will be automatically removed.

Driver installation of external video card

Run “driver installer”, take Setup.exe,
click on “next”- “yes”
-“next”
-“next”and”finished”
The system will automatically search for devices to complete the installation

Driver installation of network

Run “driver installer”:X58 LAN/WIN7/XP/setup.exe clickon “next”-“installation”-“finished” and restart the computer， the system will automatically
search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7”
Menu: please pay attention to every option in the settings menu. When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.

Main Menu Function

• Main
• System Overview
• Date/Time settings, HDD specs/Monitor type settings.
• Advanced
• Advanced Settings
• BIOS special function settings, such as virus alert, booting disk priority etc.
• Chipest
• Advanced Chipest Settings
• Boot
• Boot Settings
• Security
• Security Settings
• Save
• Save Setting
• Exit
• Exit Options

Exit settings include loading of optimized defaults value/ loading of fail- safe defaults / discarding changes/ exiting without saving.Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving.

SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD.
WWW.HUANANZHI.COM

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>