Treevol WHFP023 Manika Storage Cabinet Instruction Manual
- September 12, 2024
- Treevol
Table of Contents
Treevol WHFP023 Manika Storage Cabinet
Specifications :
- Wood dowels: x58
- Spreading bolt: x36
- Minifix cam: x36
- Cover caps: x40
- Flat head screw: x2
- Nail-on glide: x10
- Hinge + screws: x4
- Wall anchor + screw: x4
- Handle: x1
- Broom Hanger: x1
Product Usage Instructions
What Will You Need?
Hi! My name is Armando, and I’ll be with you while you assemble this
cabinet. You will need:
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or a rug)
- Electric screwdriver (optional)
Where Should You Start?
Ensure that you have all the necessary panels and hardware components
before starting the assembly. Check the quantities and make sure everything is
in good condition.
What’s in the Hardware Bag?
The hardware bag contains various components required for assembly, including
wood dowels, spreading bolts, Minifix cams, cover caps, screws, glides,
hinges, wall anchors, handle, and broom hanger.
How Do the Dowels and Minifix System Work?
Wood Dowels:
- Insert the dowel into the indicated hole between panels.
- Gently hit the dowel until it’s fully inserted, adjusting the joint.
Minifix System:
- Insert the Minifix cam with the arrow pointing towards the panel’s edge.
- Place the spreading bolt with the black plastic part facing down.
- Secure the joint by turning the Minifix cam.
Let’s Start Assembling!
Follow the assembly steps outlined in the manual using the provided panels
and hardware components.
Fix Your Cabinet to the Wall
- Measure and mark the points on the wall for securing the cabinet.
- Drill on the markings using a 5/16 drill bit.
- Insert wall anchors into the drilled holes.
- Secure the cabinet to the wall using screws.
FAQ:
-
How much weight does the cabinet resist?
The weight capacity of the cabinet is not specified in the manual. It is recommended to avoid overloading the cabinet with heavy items to ensure its longevity. -
What are the last recommendations for taking care of the cabinet?
Ensure to regularly clean and maintain the cabinet by dusting it and avoiding exposure to moisture or direct sunlight. Tighten any loose screws or components periodically to keep the cabinet sturdy.
ASSEMBLY INSTRUCTIONS
STORAGE CABINET
It’s much better if you get some company for this!
What will you need?
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
Where should you start?
This is so IMPORTANT
Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything
is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
| A – x1 | B – x1 | C – x1 | D – x1 |
|---|---|---|---|
| E – x1 | F – x1 | G – x2 | H – x2 |
| I – x2 | J – x5 | K – x4 | L – x1 |
| M – x1 |
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.
How do the dowels and Minifix system work?
- this is so important too!
- Everytime you’re using one of these connectors during the assembly, you should follow these same steps.
Wood dowels
They are little wooden cylinders.
- Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
- When joining two panels together, don’t forget to gently hit the panels to adjust the joint.
Minifix system
-
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
-
This is a Minifix cam.
It has a little arrow on its upper surface. -
You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).
-
This is a spreading bolt.
You should put it with the black plastic part facing down. -
After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.
Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.
Hinge adjustment
Fix your cabinet to the wall
- On the wall, measure and mark the points shown below.
- Drill on the markings with a 5/16″ drill bit.
- Insert the wall anchors inside the drillings.
- Place the cabinet and secure it with the screws.
How much weight does my cabinet resist?
Congratulations! It’s done
- But don’t go yet!
- There are some recommendations left for you to take care of your cabinet correctly from now on.
- SUPER IMPORTANT!
- We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone.
Be specially careful with the kids.
Taking care of your cabinet:
- Do not paint the cabinet.
- The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
- Clean the metallic hardware with a dry cloth.
- DO NOT overload the cabinet (see suggested loads)
- Do not hit or hammer the cabinet (only when indicated here).
- Clean it with thinner, a soft soap solution or simply a damp cloth.
- Don’t drag the cabinet, lift it up with other people.
- Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
WARRANTY POLICY
- Furniture has a 1 year warranty coverage in wooden parts and 1 year warranty coverage
- in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.
- Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.
- This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.
- This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc.
- Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).
- To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company.
- There are no other warranties applicable to this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>